Motorplates

Press these hardened insert bushings into your motorplate to prevent the motorplate bolt holes from elongating overtime and becoming sloppy. These bushings feature a serrated edge, which helps lock the bushing into the motorplate hole...

12" x 36" BBC Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 12" overall height • 36" overall width

12" x 36" BBC Motorplate with Water Pump Holes  Specifications• Made of 6061-T6 1/4" aluminum • 12" overall height • 36" overall width

12" x 36" SBC Motorplate Specifications:• Made of 6061-T6 1/4" aluminum • 12" overall height • 36" overall width

12"x36" DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 12" overall height • 36" overall width

These nuts are made to be pressed into those hard to reach areas at the bottom of the midplate or blocksaver. This allows for easy bolting of the bellhousing.Sold individually.

Larry Morgan Hemi Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 14-1/4" overall height • 34" overall length • 28-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in...

When transporting or storing your racecar with motor removed, bolt this Adjustable Motorplate Travel Support Bar in your motorplate mounting holes on the chassis to prevent the strut tubes from flexing in. Simply adjust to...

Big Block Ford Hemi Pro Stock Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 32" overall width • 26-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

BBC Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 36-3/4" overall width 

Chrysler TFX Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 9" overall height • 36" overall width

This Dodge B-1 440 Big Block Motorplate fits a factory stock 440 CID block. Specifications• Made of 6061-T6 1/4" aluminum  • 32" overall length • 26-1/4" notch width Note: This motorplate requires qty-4 #217065...

DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 34-1/2" overall width • 28-5/8" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

Ford 351 Windsor MotorplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 36" x 12"• Ford 351 Windsor

Use this spacer between the motorplate and the motorplate mount on the chassis when moving the engine 1" forward. Drill to match your motorplate bolt pattern.Specifications:• Material: Aluminum• Thickness: 1"Sold each.

GXP/Cobalt BBC Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 32" overall width • 26-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 32" overall width • 26-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

This motorplate is designed to fit LS-1 through LS-9 engines. It is machined on the driver back side for clearance for aftermarket cylinder heads. Specifications • Made of 6061-T6 1/4" aluminum • 35-1/2" Overall Width • 29" Notch...

  Mopar Hemi Pro Stock Motorplate Specifications• Made of 6061-T6 1/4" aluminum  • 33" overall width • 27-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

0.090" thick 4130

This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes laser cut 4130 brackets and all hardware for installation. Welding required.

Narrow BB Ford Hemi Motorplate Specifications• Made of 6061-T6 1/4" aluminum  • 31" overall width• 24-1/2" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

Use this BBC offset motor plate when replacing a 5.3 bore spacing with a 5.0 bore space motor . It has a 1.5" offset.   Offset BBC Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 31" Overall Width • 25" Notch...