Induction Solutions

2.5 Inch Liquid Filled Gauge – Induction Solutions gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and...

2.5 Inch Liquid Filled Gauge – Induction Solutions gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and...

Induction Solutions 4 Cylinder Plumb Kit includes everything to completely plumb the manifold and hook a nitrous and fuel feed line up to. The parts included are:• 4 Stainless Steel 90°...

This is a Stainless Steel 90 degree “dry” style nozzle most commonly used in EFI applications. Can be used with one nozzle in each runner as a direct port, or some use a single nozzle...

This is Induction Solution's bottom exit fuel solenoid used on their X275 Direct Port Systems and many of their plate systems. This solenoid has a Viton plunger, a very low-amp coil, 1/8 NPT...

This is similar to Induction Solution's traditional distribution block but these are machined with an 1/8 NPT port on each side, allowing for use of any 1/8 NPT accessory and is roughly 3/8″...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement high amp nitrous solenoid coil for Induction...

The Induction Solutions Stainless Steel high flow Quarter Turn Valve, nitrous shut off has PTFE seals. It is a great addition to your nitrous system. This valve, matched with their in line nitrous...

Induction Solutions introduces the Guardian Nitrous Plate System! This is the first nitrous plate system to incorporate self-resetting pressure relief panels to help protect your carburetor in the...

The I-S purge kit insures a supply of fresh liquid nitrous at the solenoids for instant and repeatable nitrous injection. It is an integral part of any nitrous system! Purging bleeds both accumulated...

Water injection is becoming increasingly popular in today’s race cars, by injecting a fine mist of water into your engine it drastically reduces the chance of detonation occurring during a run...

A Nitrous Fill Station is the best way to fill your nitrous bottle by yourself! Having a nitrous fill station of your own can also save you time and money. No need to drive to your nearest nitrous...

This is Induction Solutions plunger and service kit for the I-S purge solenoid(P#19719). It will also fit many other popular brand and part number solenoids as well. Measurements are with a tolerance...

The Qwik Trik Racer Safety Adapter is for a bottle that already has a -8 style racer safety in place and you are wanting to be able to use Induction Solution's 19896 Qwik Trik Racer Safety coupler...

A Racer Safety Blow Down Kit is something that you want to have BEFORE you need it!When a racer safety pops inside a car it can be scary and very disorienting to the driver. The racer safety blow...

The I-S Single Stage EFI Dry Nitrous Plumb Kits are designed for use on modified V8 engines. The system includes their .120 Bottom Exit Nitrous solenoids, stainless steel lines, stainless steel jets,...

Induction Solutions soft line nitrous plumb kits have the potential to flow from 100-500+* HP! These kits have multiple options including different nozzles, solenoids, and tunes. All kits come with...

The I-S Trash Can nitrous solenoid is the big daddy of them all! This solenoid has a massive .175 orifice that will free-flow 850+ HP per solenoid!! It has a 1/4 NPT side inlet with a 1/8 NPT bottom...

Having a trash can solenoid wrench is a necessity for anyone with trash can solenoids! Using an improper tool can cause costly damage to the solenoid’s stem and other components. This wrench...

This I-S solenoid bracket will allow you to mount two nitrous and/or fuel solenoids right at the carburetor base plate. Laser cut from billet aluminum and anodized black for a nice clean look. This...

INDUCTION SOLUTIONS 2 STAGE EFI DRY NITROUS PLUMB KIT (100-1,000 ADDED HP) – Plumb up your own 2 stage dry direct port nitrous system! The I-S Two Stage Dry Direct Port Plumb Kits are designed...

This is a great addition to anyone’s nitrous kit that may have came with a -4 line set up. Most kits sold with a -4 line are limited to around 250 HP. Going to this I-S upgrade line kit will...

With Induction Solution's Max-Flow Valve, liquid filled gauge, and bottle nut in place their nitrous bottles are a complete package. They carry only quality nitrous bottles with top of the line...

With Induction Solution's Max-Flow Valve, liquid filled gauge, and bottle nut in place their nitrous bottles are a complete package. They carry only quality nitrous bottles with top of the line...

I-S bottle valves are top of the line! Their bottle valves are a true “high-flow” valve, with a large 1/2" siphon tube with a flare to encourage great flow and consistency. They have...

With Induction Solution's Max-Flow Valve, liquid filled gauge, and bottle nut in place their nitrous bottles are a complete package. They carry only quality nitrous bottles with top of the line...