- Apparel, Books & Software
- Bodies, Windows & Mounting
- Carbon & Fiberglass Composites
- Overstock & Clearance Items
- Chassis & Suspension
- Driveline, Axles & Brakes
- Electrical, Ignition & Data Systems
- Hardware & Raw Materials
- Headers & Engine Accessories
- New Products
- Plumbing, Fuel & Cooling Systems
- Safety & Parachutes
- Steering & Pedals
- Tools, Oils & Racing Accessories
- Wheels, Tires & Accessories
-
QM 1" ID x 2.05" OD x .784" W Delrin Pedal Bearing Replacement
Quarter-Max
$47.24This delrin pedal bearing replacement fits in our pro series pedal mounts. Designed to save weight over steel pedal bearings.Specifications:• I.D. - 1"• O.D. - 2.05"• Width - .784"QM-420558$47.24 -
QM Aeromotive Fuel Regulator Mount
Quarter-Max
$59.84This fuel regulator mount is designed to mount most Aeromotive fuel regulators. Mounts the fuel regulator on (4) rubber vibration mounts to reduce vibration to the fuel regulator and aeration in the fuel system. Quickly remove with (2) quarter turn...QM-213121-1$59.84 -
Black Plastic Knob, 3/4" OD x 10-32 Female Thread
$8.39Plastic KnobSpecifications:• OD: 3/4"• Thread: 10-32 Female• Color: BlackQM-600083$8.39 -
Toggle Valve
Stroud Safety
$44.103-Way Toggle ValveSpecifications:• Toggle Material: ENP Steel• Body Material: Brass• Inlet/Outlet: 1/8 in. NPTSTO-MJTV-3$44.10 -
V-Series, 17 in. x 3.5 in., Strange, 1.75 in. BS, Black
Weld Racing
$1,101.45The V-Series front runner features one-piece forged construction providing a lighter, stronger wheel with virtually no run-out. This wheel not only adds style to your ride but provides the perfect platform to showcase your aftermarket brake application...WEL-84B-17001$1,101.45 -
MSD Pro Mag 44 Amp Electronic Points Box with Rev Limiter, Red
MSD
Retail: $1,856.95$1,483.95The magnetic pickup in the generator delivers the trigger signal while the Box takes care of the rest: namely the long duration spark and quick rise time. The MSD electronic circuitry releases the power of the generator to the coil instantly and at full...MSD-8147Retail: $1,856.95$1,483.95 -
Magneto Kill Switch, Pro Mag 44
$178.49This magneto kill switch can be used for a single Pro Mag 44 set up or a dual Pro Mag 44 set up, but will have to purchase another relay separate. One side of the switch can also turn off another circuit simultaneously when you kill the mag. The switch...QM-214134$178.49 -
QM 1993-2002 Chevrolet Camaro Carbon Fiber Wing
Quarter-Max
$734.99This carbon fiber wing fits a 1993-2002 Chevrolet Camaro steel body. This wing includes spill plates, a wickerbill, and hardware. Specifications:• Body: 1993-2002 Chevrolet Camaro• Material: Carbon FiberWing support kit sold separately...QM-209218$734.99 -
QM TFX Lightened Motorplate, 34" Overall Width
Quarter-Max
$227.84TFX Lightened MotorplateSpecifications:• Material: 6061-T6 aluminum • Thickness: 1/4"• Notch to notch: 26"• Overall width: 34" Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.QM-213112-1$227.84 -
QM Zoomie Header Aluminum Body Exhaust Flange Kit
Quarter-Max
$30.44This body exhaust flange provides a professional, finished look while protecting the paint & body around the side exit headers or zoomies. Includes hardware.Specifications:• Style: Zoomie header• Material: 5052 aluminum• Thickness: ...QM-219432$30.44 -
QM Rear End Housing Faceplate Press-In Stud, 3/8"-24 Thread x 1-3/4" Long
Quarter-Max
$2.72Press-in this housing faceplate stud into the 3rd member mounting flange on 8" and 9" Ford housings for mounting the 3rd member to the rear end housing. Specifications:• Thread: 3/8"-24• Overall length: 1-3/4"QM-600048$2.72 -
QM 11 in. Rear End Housing Faceplate for Wide 4-Link Centers
Quarter-Max
$325.49Faceplate for 11 in. rear end housing. For wide 4-link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RHQM-410895-1$325.49 -
QM 11 in. Rear End Housing Faceplate for 16 in. Wide 4-Link Centers
Quarter-Max
$325.49Faceplate for 11 in. rear end housing. For 16 in. wide Four Link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RHQM-410895$325.49 -
QM Lightweight Wheelie Bar Load Cell with 1/2" Hole x 3/4"-16 Thread, Aluminum, Black
Quarter-Max
$415.79Relay the amount of force applied on your wheelie bars to your Racepak with this load cell. Fill the load cell with brake fluid and install the sensor into the 1/8" NPT port. Modification of current top wheelie bar tubes required to install, or switch to...QM-219705-2B$415.79 -
QM Valve Stem, Drag Liner
Quarter-Max
$22.04This valve stem requires a 21/64 drill bit and 1/8-27 NPT tap to install. When installing, go about 3/4 of the way through with the tap so the NPT threads will tighten up properly. Use thread sealer tape and tighten stem into wheel.Qty-1 required for...QM-215102-2$22.04 -
QM 1-5/8" ID Tube Union Bracket
Quarter-Max
$15.74Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-5/8" ID• Material: 4130• Thickness: 1/4" Also available in 1-1/2" ID.QM-411007$15.74 -
QM 1-1/2" ID Tube Union Bracket
Quarter-Max
$15.74Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-1/2" ID• Material: 4130• Thickness: 1/4" Also available in 1-5/8" ID.QM-411006$15.74 -
QM 1-1/4 in. ID Silicone Breather Hose, Black, 3 Ft Long
Quarter-Max
$70.34Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3 ply polyester silicone• Length: 3 FtQM-219529$70.34 -
QM 1-1/4 in. ID Silicone Breather Hose, Black, 12 Ft Long
Quarter-Max
$304.49Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3 ply polyester silicone• Length: 12 FtQM-219529-1$304.49 -
QM .375" ID x .625" OD x 1.3125" Width Bushing, Midmount, 4130
Quarter-Max
$7.34Weld this bushing into the chassis to mount your midplate/midmount.Specifications:• I.D.: .375"• O.D.: .625"• Width: 1.3125"• Material: 4130QM-420462$7.34 -
QM Lexan Window Rubber, 1/4 in. x 3/4 in.
Quarter-Max
$38.84Lexan Window Rubber, 1/4 in. x 3/4 in.This Lexan window rubber is designed for installing front and rear Lexan windows when using the factory mounting window lips on a steel body car. Select your desired rubber thickness to mount your Lexan windows flush...QM-600080$38.84 -
QM Lexan Window Rubber Installation Kit
Quarter-Max
$58.79 - $73.99This kit is designed for installing front and rear lexan windows when using the factory mounting window lips on a steel body car. Select your desired rubber thickness to mount your lexan windows flush with the body. Available rubber sizes: 3/8" x 3/4",...QM-21955x$58.79 - $73.99 -
Safecraft 10 Lb Fire System, Fluoro FS Fire Protection Fluid, Pull Cable & Steel Tubing Kit LT10JAB
Safecraft
$866.25Safecraft 10 Lb Fire System, Fluoro FS Fire Protection Fluid, Pull Cable & Steel Tubing Kit LT10JABSafecraft’s Model LT is considered the “gold standard” of the industry. More racers and professional race teams use the Model LT more...SAF-LT10JAB$866.25 -
Strange Eaton HD Clutch Style Differential - 3 Series, Fits Chevy 12 Bolt Passenger Car with 30 Spline Axles
Strange Engineering
$751.00Eaton HD clutch GM 12 blt car / 30 spline / 01-088530H / 3.90-down ApplicationChevy 12 Bolt Passenger CarUsing a gear set requiring a 3 series carrier DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect replacement for worn-out OEM clutch...STR-R5087$751.00 -
Strange Eaton HD Clutch Style Differential - 4 Series, Fits Chevy 12 Bolt Passenger Car with 30 Spline Axles
Strange Engineering
$802.00Eaton HD clutch GM 12 blt car / 30 spline / 01-088530 / 4.11-up ApplicationChevy 12 Bolt Passenger CarUsing a gear set requiring a 4 series carrier DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect replacement for worn-out OEM clutch...STR-R5086$802.00 -
Strange Eaton HD Clutch Style Differential - 2.73 & Up, Fits Chevy 8.5 10 Bolt Rear Ends with 28 Spline Axles
Strange Engineering
$751.00Eaton HD clutch GM 8.5 / 28 spline / 01-085728 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 28 Spline Posi UnitA perfect...STR-R5085$751.00 -
Strange Eaton HD Clutch Style Differential - 2.73 & Up, Fits Chevy 8.5 10 Bolt Rear Ends with 30 Spline Axles
Strange Engineering
$788.55Eaton HD clutch GM 8.5 / 30 spline / 01-085530 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect...STR-R5083$788.55 -
Strange GT Strut Package, Externally Adjustable, Heavy Duty Brake Kit for Hub Mount Wheels
Strange Engineering
$2,975.00Drag Race Use Only For Hub Mount WheelsChoice of 4 1/2″ or 4 3/4″ bolt circle Springs Are Not IncludedAccepts 2 1/2″ OD x 14″ springs – Sold separately Dimensions22.690″ – Extended16.290″ –...STR-PSS325$2,975.00 -
Strange Pro Series Nodular Iron Case Assembly, Aluminum Support with Lightweight Steel Spool, 28 Spline Pro Gear & Chrome Moly Yoke
Strange Engineering
$1,650.00Complete Center Section Includes: N2205 / N22063.062″ Bore S-Series Case used for 28 or 31 spline3.250″ Bore S-Series Case used for 35 spline 8-10% stronger material than factory nodular ironCritical areas reinforcedHeavy duty main caps and...STR-PRF115$1,650.00 -
Strange 35 Spline Alloy Axle Package with Axle Bearings, Retainer Plates & 1/2" Stud Kit
Strange Engineering
$559.00Alloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Applications For 35 Spline Alloy AxlesChevy 12 bolt carDana 60Ford 8.8Ford 9″ (requires 3.250″ bore...STR-P3504$559.00 -
Strange 28-31 Spline Alloy Axle Package with Axle Bearings & 1/2" Stud Kit
Strange Engineering
$545.00lloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Application Splines AvailableChevy 8.2 10 bolt…… 28 / 33 **Chevy 8.5 10 bolt…… 28 / 30 /...STR-P3102$545.00 -
Strange Master Cylinder Adapter Fitting, 1/2"-20 Inverted Flare to 3 AN
Strange Engineering
$15.00ApplicationStrange B3359 / B3359TA / B3360 / B3360TA master cylindersOEM Mopar K car master cylinder and aftermarket replacements Allows use of 3 AN brake lines common to Drag Racing For 9/16″-20 to 3 AN – See P2357STR-P2356$15.00 -
Strange Pro Race Axle & Spool Package, Bearings, & 5/8" Stud Kit
Strange Engineering
$820.00Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...STR-P200758$820.00 -
Strange Pro Race Axle & Spool Package, Bearings, & 1/2" Stud Kit
Strange Engineering
$760.00Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...STR-P2007$760.00 -
Strange Pro Race Axle & Spool Package for 2005-2014 Ford 8.8 Rear End, C-Clip Eliminator Kit & 1/2" Stud Kit
Strange Engineering
$1,075.002005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 1/2″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...STR-P2000FM05$1,075.00 -
Strange Pro Race Axle & Spool Package for 2005-2014 Ford 8.8 Rear End, C-Clip Eliminator Kit & 5/8" Stud Kit
Strange Engineering
$1,125.002005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 5/8″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...STR-P2000FM0558$1,125.00 -
Strange Differential Transport Case
Strange Engineering
$55.00Keep your differential clean and ready to go using Strange differential storage cases. They are shaped and molded to fit your differential solidly inside. The cases include straps and mounting hardware to keep the two halves sealed together.STR-P1900$55.00 -
Strange Pro Race 40 Spline Solid Axles, 3.350" Axle Bearings, & 5/8" Stud Kit
Strange Engineering
$950.25Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are...STR-P1017$950.25 -
Strange Pro Race 40 Spline Solid Axles, 3.150" Axle Bearings, & 5/8" Stud Kit
Strange Engineering
$792.75Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.150″ ID housing ends are...STR-P1016$792.75 -
Strange Pro Race 40 Spline Gun Drilled Axles, 3.350" Axle Bearings, & 5/8" Stud Kit
Strange Engineering
$1,044.75Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are...STR-P1015$1,044.75