Extreme Series 4-Link Chassis Brackets, 4130, 15" Notch
Our Extreme Series 4-Link brackets offers the most adjustability you can get in a weld-on front chassis 4-link bracket. These brackets feature qty (8) 1/2” top holes and qty (8) 1/2” bottom holes for optimal 4-link tuning adjustability. The 1/2” holes are 5/8” apart on center. The center of the top crossmember to center of the bottom crossmember is 15”. Manufactured in house on our water jet machine.
• Material: 4130
• Thickness: 1/4"
• Notch Spread: 15"
We recommend using our 1/2” NAS bolt kits with these brackets for tight fitment and considerably less bolt movement than other systems. (sold separately)
We also offer 1/8” thick 4130 doubler plates for the top and bottom holes that weld to the 4-link bracket to increase the thickness around the holes to 3/8” for extra strength and longevity. Doubler plates are sold separately.
When mocking up and welding together brackets you should use grade 8 bolts. After all the welding is done you should ream the holes to correct size. Do not use a drill bit! We recommend using our 7 piece chucking reamer kit.
Sold in a set of four.
Very good 4-Link Brackets
The quality of the brackets from Quartermax are the best I've seen in many years. The design lets my customers adjust their chassis for the ever changing track conditions.
Customers also viewed