Shock & Spring Tools

Recommended by the Leading Manufacturers in the World! Features:• Portable, Digital Force with Travel Indication• Large 0.5" (13mm) Display• Knurled Pressure Relief Knob• Peak Hold Feature• Quick, Single-Pin Vertical...

Recommended by the Leading Manufacturers in the World! Features:• Portable, Digital Force with Travel Indication• Large 0.5" (13mm) Display• Knurled Pressure Relief Knob• Peak Hold Feature• Quick, Single-Pin Vertical...

Features:• Measures Pressure in PSI & BAR• Pressure range of 0 to 300 psi & 0 to 20 BAR• Liquid-Filled• Measured in 10lb PSI Increments & 1lb BAR

Features:• Rates Standard Coil Springs 2.5" (64mm) to 6" (152mm) Diameter• Rates Coil-Over Setups• Compress Coil Over Assemblies for Easy Adjustments• Adjust Coil-Overs without Disassembling Shock & Spring• Includes Spring...

Great for Race Cars, Motorcycles, Snowmobiles & ATVs! Features:• Allows Quick & Easy Pressure Settings to 300 PSI (20 BAR)• 0.5 Increments• Displays in PSI, BAR, kg/cm²• Compatible with Most Shocks• Thumb-Operated...

Features:• Quick & Easy Retrofit from Coil Spring to Fork Tester Handles• Handles Up to 2" (48mm) Diameter & 36" (914mm) Long Fork Springs• Readout in 0.1lb (0.05kg) Increments• Standard 9-Volt Battery Operation• Designed...

Replacement nitrogen bottle for the Nitrogen Shock Filling Kit #219527.Bottle comes unfilled.  

This Nitrogen Shock Filling Kit includes a 2.5 lb bottle and an adjustable regulator with a coiled hose and air chuck installed.Coil hose rated up to 125# working pressure. Bottle comes unfilled.  

Designed specifically for adjusting the springs on Penske coil over shocks and struts. Eliminate the old hammer/screwdriver technique by using this wrench.              

Determines of the Rates of Pull Bars Features:• Works with Intercomp’s Coil-Over Spring Tester & Compressor• Allows Pull Bars to be Loaded in Tension• Rate Compression-Type Traction Links• 36" Center-to-Center Length...

Add nitrogen to your Penske shocks with this unit. Comes with Case  

This new item is used to limit travel on your shocks. This design allows the Packer to slip over the shock shaft and it will stay in place. You can stack as many Packers as you need on top of each other. The Packer is .125” thick and is made to fit...

This handy gauge is used to check the pressure in your Penske shocks. Can also be used to accurately fill the shocks.  

This 180 degree spanner wrench is specifically designed for the springs on coil over shocks. Eliminate the old hammer/screwdriver technique with this wrench. Plated.

This 90 degree spanner wrench is specifically designed for the springs on coil over shocks or struts. Eliminate the old hammer/screwdriver technique with this wrench.