Rack & Pinions

ApplicationDoor Cars – Drag Race OnlyDescriptionSteering Rack & Pinion• 1.12 in. of rack travel per pinion revolution• 22 to 1 ratio• 24.5 in. tie rod centers• 20 degree horizontal pinion angle• 9/16-26 spline...

Use this rack & pinion mount kit to ease the installation of the Strange Engineering billet rack & pinions to the chassis.This kit fits both the STR-S3448 and STR-S3448-195 Strange Engineering Billet Rack & Pinions.Kit includes:• Qty-6 -...

This tie rod tube kit is designed to work with the Strange Engineering Billet Rack & Pinions.  STR-S3448-195 Billet Steering Rack & Pinion, 19.5" Tie Rod Centers   STR-S3448 Billet Steering Rack & Pinion, 24.5" Tie Rod Centers Kit...

ApplicationDoor Cars – Drag Race Only DescriptionSteering Rack & Pinion• 1.34 in. of rack travel per pinion revolution• 22 to 1 ratio• 19.5 in. tie rod centers• 20 degree horizontal pinion angle• 9/16-26 spline...

ApplicationDoor Cars – Drag Race OnlyDescriptionSteering Rack & Pinion• 1.34 in. of rack travel per pinion revolution• 22 to 1 ratio• 24.5 in. tie rod centers• 20 degree horizontal pinion angle• 9/16-26 spline...

The connection between steering column and steering box may very well be one of the most crucial. Put these rack adapters in place for a quality fit. Proper installation will provide solid performance. Features:• Material: 4130• Fits Mustang II...

Recommended for installation with new tie rods to protect your suspension equipment from dust and dirt.Includes qty-2 boots, qty-2 zip ties, and qty-2 clamps.

Includes 4130 tubes with wrench flats for quick and easy adjustment, AUR-HXAM high misalignment rod ends, jam nuts, NAS bolts, jet nuts and AN washers. Includes ball joints.Plated and welded.

The connection between steering column and steering box may very well be one of the most crucial. Put these rack adapters in place for a quality fit. Proper installation will provide solid performance. Features:• Fits Mustang II / Pinto non-power...

The Pro Series Tie Rod Tube Kit is designed to slip over and weld to Pinto tie rods that have been turned down. It includes 4130 tubes with wrench flats for quick and easy adjustment, Aurora HXAM high-misalignment rod ends, jam nuts, NAS bolts, jet nuts...

The Pinto-Style Manual Rack and Pinion Combo Kit includes the Flaming River Standard FR1501 or Narrowed FR1501-2 Rack and Pinion, RJ-203107 Billet Rack & Pinion Mount Kit, and the RJ-303106 Quarter-Max Tie Rod Tube Kit.Welding required.

These clevises are designed to screw on to a pinto style rack & pinion. They have 14MM x 1.5 pitch female threads. Designed to replace the old style “ball joint” style tie rods. The clevises are designed for Aurora HXAM-6T hi-misalignment...

This front steer manual rack & pinion's design is based on the popular Pinto-style rack and pinion to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality,...

Our Quarter-Max tie rod tube kit easily adapts the early Pinto rack & pinion to virtually any application. This kit simply slips over and welds to the stock Pinto tie rods. It can be trimmed to fit any chassis width. Kit includes tubes, rod ends, jam...

Use this kit to ease the installation of new rack & pinions to the chassis. Kit includes the 4130 mounting brackets, 4130 tubing, screws, and nylock nuts.Welding required.

The best solution for reducing bumpsteer to nothing. Our racks are professionally narrowed for zero bumpsteer when properly installed on a RJ chassis. This shortened rack has machined ends and the pro series tie rod tubes. Includes rod ends. Rack is...

This front steer manual rack & pinion's design is based on the popular Pinto-style rack and pinion to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality,...

Machined to accept RJ-203106 Pro Series Tie Rod Tube Kit.   Specifications:• Tube end machined to .370"   Sold each.

Lighten your rack and pinion with these replacement aluminum rack covers. The covers that come already installed on the rack and pinion are made of steel, with these replacement covers, you will save half the weight!   Specifications: •...

This kit has a steel clevis which is designed to screw on to a Pinto style Rack & Pinion. The clevis has 14MM x 1.5 pitch female threads. It is designed to replace the old style “ball joint” style tie rods and make your tie rods work much...

Use our billet rack & pinion mount kit to ease the installation of new rack & pinions to the chassis.Kit includes the billet rack & pinion mount, left and right mounting brackets, screws, and nylock nuts.Also available as the billet rack...

Use our billet rack & pinion mount to ease the installation of new rack & pinions to the chassis.Includes the billet rack & pinion mount, screws, and nylock nuts.Also available in a kit with weld-on brackets. Click here to view RJ-203107...