28-31 Spline Alloy Axle Package with Axle Bearings, Retainer Plates & Wheel Studs

Ford, Mopar or Chevy 28-31 spline Alloy axles, retainer plates,axle bearings & wheel studs

Alloy axle packages are optimized for street & track use
See Strange's Hy-Tuf axles for maximum torsional strength for all out Drag Racing

Alloy Applications With Spline & Spool Available
Chevy 8.2 10 bolt…… 33 *
Chevy 8.5 10 bolt…… 28 / 30 / 33 *
Chevy 12 bolt car…… 30 / 33 * / 35 **
Dana 60…………………. 35 **
Ford 8.8…………………. 31 / 33 * / 35 **
Ford 9″…………………… 28 / 31 / 35 **
Mopar 8 3/4…………… 30 / 35 **
57-64 Olds/Pontiac… 35 **

* 33 spline Alloy packages… See P3304
** 35 spline Alloy packages… See P3504

Notes For This Axle Package
All Chevy & Ford 8.8 require replacement 3.150″ housing ends
Packages with C-clip Eliminator kit for OEM housing ends are shown below

This Axle Package Includes:
Alloy Axles – A3100
– Forged from modified 1550 premium steel
– Majority of machining performed before heat treat to provide consistent hardness
– Induction hardened to Rc 58-62 to increase torsional strength while remaining ductile
– Finish machined after heat treat to ensure accuracy
– Choice of 28 up to 31 spline
– Lengths up to 34 1/2″
– Choice of bolt circle
– Forged in the USA
– Designed and machined by Strange Engineering

Choice of Axle Bearings (Maybe limited to housing end type)

Timken® Tapered Unit Bearings – A1013
– Designed for use with 3.150″ housing end
– Best for side loading and high mileage
– Includes outer seals and locking collars

Sealed Ball Bearings – A1021 / A1023 * / A1022 * / A1022OB *
– Low friction bearing
– Life reduced during prolonged use
– O.D. grooved for o-ring to eliminate inner axle seal
– Includes o-rings and locking collars
* These bearings include retainer plates

Retainer Plates – A1016 / A1018 / A1114 / H1147B
– For A1013 or A1021 bearings
– New plates ensure proper axle retention

Choice of Press-in or Screw-in Wheel Studs
– Press-in 7/16″-20 or 1/2″-20 OEM style factory length studs – A3130 / A3121 / A3151
– Screw-in 1/2″-20 chrome moly studs in 2″ or 3″ long – A1025 / A1026
– Metric screw-in studs in M12-1.5 x 50mm – A1035
– Screw-in studs include .060″ hardened washers
– Length is measured from underneath the hex of the stud

Options
Install axle bearings………………… See A1008R
Access hole or extra bolt circle… See A1004

Other 28-31 Spline Alloy Axle Packages
With 5/8″ stud kit………….. See P310458
With spool…………………….. See P3104S / P310458S

Street / Track Axle Packages With C-Clip Eliminator Kit
OEM Chevy car ends in 30 or 33 spline………………. See P1011GOT
OEM Chevy car ends in 35 spline……………………….. See P3509G12
OEM Ford 8.8 ends in 28 or 31 spline… See P3109F86 / P3109F94 / P3109F05
OEM Ford 8.8 ends in 35 spline…………. See P3509F86 / P3509F94 / P3509F05

Pro Race Axle Packages
With bearings, retainer plates & studs… See P1008