Bellhousings, Clutches & Components

Bellhousings, Clutches & Components

  • 1-3/4" Non-Rotational Throwout Collar
    Add to Cart

    1-3/4" Non-Rotational Throwout Collar

    Quarter-Max

    $61.99
    Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...
    RJ-420400-1.75
    $61.99
    Add to Cart
  • 2" Throwout Collars
    Add to Cart

    2" Throwout Collars

    Quarter-Max

    $51.49
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼”. Measurements are overall length. Bearing sold separately below. Please call for prices and part...
    RJ-214204
    $51.49
    Add to Cart
  • 2-1/2" Non-Rotational Throwout Collars
    Add to Cart

    2-1/2" Non-Rotational Throwout Collars

    Quarter-Max

    $61.99
    Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...
    RJ-420400-2.5
    $61.99
    Add to Cart
  • 2-1/2" Throwout Collars
    Add to Cart

    2-1/2" Throwout Collars

    Quarter-Max

    $56.99
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...
    RJ-214206
    $56.99
    Add to Cart
  • 2-1/4" Non-Rotational Throwout Collars
    Add to Cart

    2-1/4" Non-Rotational Throwout Collars

    Quarter-Max

    $61.99
    Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...
    RJ-420400-2.2
    $61.99
    Add to Cart
  • 2-1/4" Throwout Collars
    Add to Cart

    2-1/4" Throwout Collars

    Quarter-Max

    $56.99
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...
    RJ-214205
    $56.99
    Add to Cart
  • 2-3/4" Non-Rotational Throwout Collars
    Add to Cart

    2-3/4" Non-Rotational Throwout Collars

    Quarter-Max

    $61.99
    Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...
    RJ-420400-2.7
    $61.99
    Add to Cart
  • 2-3/4" Throwout Collars
    Add to Cart

    2-3/4" Throwout Collars

    Quarter-Max

    $56.99
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...
    RJ-214207
    $56.99
    Add to Cart
  • 3" Throwout Collars
    Add to Cart

    3" Throwout Collars

    Quarter-Max

    $61.99
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...
    RJ-214208
    $61.99
    Add to Cart
  • 3-1/4" Throwout Collars
    Add to Cart

    3-1/4" Throwout Collars

    Quarter-Max

    $61.99
    Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...
    RJ-214209
    $61.99
    Add to Cart
  • Add to Cart

    8-5/8" 6.1 spec. Aluminum Bellhousing

    Browell Bellhousing

    $2,137.49
    The Browell aluminum cans with 4130 lining provide a 6.1A spec bellhousing with affordable prices. We now stock an 8-5/8" depth can with Chevy bolt pattern, Lenco & Liberty trans bolt patterns, frame rail mounts, RJ triple bung clutch fork...
    RJ-214212
    $2,137.49
    Add to Cart
  • 8-5/8" 6.3 spec. Aluminum Bellhousing
    Add to Cart

    8-5/8" 6.3 spec. Aluminum Bellhousing

    Browell Bellhousing

    $2,317.99
    The Browell aluminum cans with 4130 lining provide a 6.3 spec bellhousing with affordable prices. We now stock an 8-5/8" depth can with Chevy bolt pattern, Lenco & Liberty trans bolt patterns, frame rail mounts, inspection cover, adjustment...
    RJ-214212-1
    $2,317.99
    Add to Cart
  • Quarter-Max Billet Clutch Can Mount
    Add to Cart

    Billet Clutch Can Mount

    Quarter-Max

    $61.99
    This lightweight ultra trick bell housing mount is made from billet 4130 and is designed to weld to the frame of the chassis. This low profile design prodides the most clearance yet is very strong. ½”-13 tapped holes and fits a 1-5/8" tube...
    RJ-420525-1
    $61.99
    Add to Cart
  • Quarter-Max Billet Clutch Fork - Long
    Add to Cart

    Billet Clutch Fork - Long

    Quarter-Max

    $329.99
    This Zinc coated fork is CNC machined from solid 4140 steel and then offset for use with the new 3-disc clutches. The design offers three locations for the pivot. This for requires a rod end for pivot, rather than a ball. The bell housing must have a...
    RJ-214203
    $329.99
    Add to Cart
  • Quarter-Max Billet Clutch Fork - Short
    Add to Cart

    Billet Clutch Fork - Short

    Quarter-Max

    $329.99
    This billet 4140 clutch fork is designed and built on our CNC machine here in house. It is designed for small diameter bell housing. It has a very quick ratio with 7 different 1/4” holes for ultimate adjustability in your clutch linkage. It has 3...
    RJ-214203-2
    $329.99
    Add to Cart
  • Clutch Can Work Light - Quarter-Max
    Add to Cart

    Clutch Can Work Light

    Quarter-Max

    $20.99
    Mount this 12 LED Light in the clutch area to service your clutch. This light can be mounted anywhere a light source is needed.   Dimensions 7-3/4" L x 3/4" H x 1" D
    RJ-214161
    $20.99
    Add to Cart
  • Clutch Cooling System Clutch Cooling System
    Add to Cart

    Clutch Cooling System

    Quarter-Max

    $643.99
    110V clutch blower, Carbon fiber shroud for blower, Carbon fiber flange that will clip on to most Browell bellhousings.    6ft long hose, 3 speeds air delivery (cubic foot per minute) 190/ 260/ 310. Power cord is 10 ft.   Dimensions L x W...
    RJ-219861
    $643.99
    Add to Cart
  • Quarter-Max Clutch Counterweight Set
    Add to Cart

    Clutch Counterweight Set

    Quarter-Max

    $46.49
    This handy kit contains all the washers, nuts and bolts you need to add the counterweight you want to your clutch.
    RJ-110110
    $46.49
    Add to Cart
  • Quarter-Max Clutch Fork Quarter-Max Clutch Fork
    Add to Cart

    Clutch Fork

    Quarter-Max

    $226.99
    Our fabricated clutch forks are the best on the market. They are cut down for shorter throws, very quick ratios, and no flex. For a quick ratio, choose our clutch fork. If you want the fastest ratio available, choose our Offset Cutch Fork. Steel...
    RJ-213117
    $226.99
    Add to Cart
  • Clutch Fork - Offset Clutch Fork - Offset
    Add to Cart

    Clutch Fork - Offset

    Quarter-Max

    $267.99
    Our fabricated clutch forks are the best on the market. They are cut down for shorter throws, very quick ratios, and no flex. For a quick ratio, choose our clutch fork. If you want the fastest ratio available, choose our Offset Cutch Fork. Steel...
    RJ-213118
    $267.99
    Add to Cart
  • Quarter-Max Clutch Fork - Offset Billet
    Add to Cart

    Clutch Fork - Offset Billet

    Quarter-Max

    $396.99
    This Zinc coated fork is CNC machined from solid 4140 steel and then offset for use with the new 3-disc clutches. The design offers three locations for the pivot. This for requires a rod end for pivot, rather than a ball. The bell housing must have a...
    RJ-214203-1
    $396.99
    Add to Cart
  • Quarter-Max Clutch Light
    Add to Cart

    Clutch Light

    Quarter-Max

    $4.19
    Hook this light up to the clutch switch to help you set your two-step release on the clutch switch.
    276-0270
    $4.19
    Add to Cart
  • Quarter-Max Complete Cross Shaft Kit
    Add to Cart

    Complete Cross Shaft Kit

    Quarter-Max

    $728.99
    This high quality cross shaft kit has everything you need. Cross shaft, billet fork, collar, bearing, candlestick and spline bung for arm. For door cars.
    RJ-214201
    $728.99
    Add to Cart
  • On Sale
    Flywheel Stop Tool Manufactured at Quarter-Max
    Add to Cart

    Flywheel Stop

    Quarter-Max

    Retail: $40.99
    Now: $36.49
    Was: $40.99
    Simply slide over your dowel pin on the back of your engine block and interlock the teeth of the stop with the teeth of your flywheel to keep the engine from turning while you torque your flywheel bolts. The flywheel stop has 3 different dowel holes...
    RJ-430624
    Retail: $40.99
    Now: $36.49
    Was: $40.99
    Add to Cart
  • Lenco Register Ring
    Add to Cart

    Lenco Register Ring

    Quarter-Max

    $46.49
    This ring is designed to be used when running a Lenco and Liberty transmission with the same bellhousing. This ring bolts to the front case of a Lenco with Qty-4 1/4-20” counter sink screws (included) The O.D of the ring is 4.850” and is...
    RJ-430628
    $46.49
    Add to Cart
  • Liberty Candlestick
    Add to Cart

    Liberty Candlestick

    Quarter-Max

    $218.99
    Our candlesticks have threaded bosses for proximity sensors with dual 3rd RPM holes. Other candlesticks are available special order.
    RJ-214210-1
    $218.99
    Add to Cart
  • Pro Release Bearing Assembly Pro Release Bearing Assembly
    Choose Options

    Pro Series Release Bearing

    RAM Clutches

    $129.99
    Pro release bearing assembly for 6-1/4" clutch. Collar included.Available overall lengths:• 1.875"• 2.000"• 2.250"• 2.500"• 2.750"
    RAM-40-xxxx
    $129.99
    Choose Options