Nitrous Solenoids & Accessories

Bottom exit fuel solenoids are the highest flowing gasoline/e85 solenoid Induction Solutions offer. At a quick glance these solenoids look like a “cheater style” fuel solenoid. But, upon closer inspection you will notice these solenoids have...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement fuel solenoid coil for our “Cheater” Style .156 Fuel Solenoids(PN 19715), as well as,...

This is Induction Solutions plunger and service kit for the I-S “Cheater” style fuel solenoid part number 19715-CS. It will also fit many other popular brand and part number solenoids as well. NOS 16050 These will also fit other brands and...

This is Induction Solutions “Cheater Style” fuel solenoid, it is an equivalent of the NOS Cheater fuel or the Edelbrock Victor Pro fuel. This solenoid has a Viton plunger, a very low-amp coil, 1/8 NPT inlet/outlet, and a .156 orifice. The...

This is Induction Solutions small body fuel solenoid, they use this solenoid in all of their traditional direct port systems. This solenoid has a Viton plunger, a very low-amp coil, 1/8 NPT inlet/outlet, and a .156 orifice. The difference between this...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement high amp nitrous solenoid coil for Induction Solutions .125 bottom exit (PN 19718-125) nitrous...

Features:• Black anodized• Works great in tight areasMade in the USA.

Lightweight nitrous solenoids are great for anyone who’s looking to save weight in any way possible. They look great with CNC machined bottoms taken down to the bare minimum. This solenoid includes Induction Solutions TRUE .120 orifice making them...

Lightweight nitrous solenoids are great for anyone who’s looking to save weight in any way possible. They look great with CNC machined bottoms taken down to the bare minimum. This solenoid includes Induction Solutions TRUE .125 orifice making them...

This lightweight fuel solenoid is great for anyone who’s looking to save weight in any way possible. Based on Induction Solutions small body fuel solenoid, it looks great with CNC machined bottoms taken down to the bare minimum. This solenoid has a...

This lightweight solenoid is Induction Solutions traditional Trash Can Solenoid with a 1/4 lb per solenoid CNC machined off of the base of the solenoid. This both saves weight as well as looks great! These are a great way to flow huge horsepower numbers...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement low amp nitrous solenoid coil for I-S .120 bottom (PN 19718) and/or .120 side exit (PN 19717)...

Having a solenoid wrench is a necessity for anyone with solenoids! Using an improper tool can cause costly damage to the solenoid’s stem and other components. This wrench can fully disassemble and assemble nearly any manufacturer’s purge,...

Are you looking at the right nitrous plunger? Check out Induction Solutions comparison page to see what kind you need! Nitrous Solenoid Plunger Info This is Induction Solutions PTFE pinned style plunger and service kit. It is good for both their bottom...

Induction Solutions purge solenoids are great for every purge setup. Purging is very necessary with nitrous cars, it rids the line of air and gaseous nitrous making sure the system delivers liquid nitrous to the cylinder, making the most power...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement purge solenoid coil for Induction Solutions (PN 19719) purge solenoids, it will also fit these...

This is Induction Solutions plunger and service kit for the I-S purge solenoid(P#19719). It will also fit many other popular brand and part number solenoids as well. Measurements are with a tolerance of ±0.004″

Are you looking at the right nitrous plunger? Check out Induction Solutions comparison page to see what kind you need! Nitrous Solenoid Plunger Info This is Induction Solutions PTFE self compensating style plunger and service kit. It fits older I-S...

I-S Side Exit Nitrous Solenoid with .120 base – This is one of Induction Solutions commonly used nitrous oxide solenoids. A single Side Exit Solenoid can free-flow 475+HP of nitrous! Induction Solutions stainless steel solenoids have a very low amp...

I-S Side In/Bottom Out with a .120 base – This is Induction Solutions most commonly used nitrous oxide solenoid. They are used in all of their conventional direct port systems. A single Bottom Exit Solenoid can free-flow 5ooHP of nitrous! Induction...

This is Induction Solutions plunger and service kit for the I-S small bodied fuel solenoid part number 19715. It will also fit many other popular brand and part number solenoids as well. NOS 16080Edelbrock 72050Speedtech 101-157Wilson 371957Nitrous...

Features:• Black anodized• Works great in tight areasMade in the USA.

The SuperMax Alcohol Fuel Solenoid is among the highest flowing alcohol fuel solenoids in the industry! With a massive .184 orifice the solenoid is capable of flowing over 700hp of fuel! This solenoid is great for single solenoid or remote mounted direct...

Induction Solutions SuperMax Bottom Exit Solenoid W/ .125 base – The Induction Solutions SuperMax Bottom Exit Solenoid features a stainless steel base, a true .125 orifice, a high-amp coil to over come the increase in flow(18-20 amps), a PTFE...

Induction Solutions SuperMax Side Exit Solenoid W/ .125 base – The Induction Solutions SuperMax Side Exit Solenoid features a stainless steel base, a true .125 orifice, a PTFE plunger for consistent sealing for the life of the solenoid, a high-amp...

The I-S Trash Can nitrous solenoid is the big daddy of them all! This solenoid has a massive .175 orifice that will free-flow 850+ HP per solenoid!! It has a 1/4 NPT side inlet with a 1/8 NPT bottom outlet. It has an amp draw between 16-18 amps. It has a...

Coils are what make your solenoid function. If left on for an excessive time or after long term use they occasionally need replaced.This is a replacement trash can solenoid coil for our trash can (PN 19716) solenoids, it will also fit these common...

This is Induction Solutions PTFE style plunger and service kit. It fits their 19716 Trash Can solenoid. It will also fit many other popular brand and part number solenoids as well. I-S 19716NOS 16010Speedtech 100-3157Nitrous Supply 26010Wilson...

Having a trash can solenoid wrench is a necessity for anyone with trash can solenoids! Using an improper tool can cause costly damage to the solenoid’s stem and other components. This wrench can fully disassemble and assemble most manufacturers...

These I-S solenoid brackets will allow you to mount two nitrous and/or fuel solenoids right at the carburetor base plate. They are laser cut from billet aluminum and are anodized black for a nice clean look. These solenoid brackets can be used with...