Housing Accessories

Aluminum Cap and Aluminum Bung 2" Outside Diameter.Made of 6061 T-6 Aluminum.

Faceplate for 11" rear end housing. For 16" wide 4-link centers.Specifications:• Thickness: 3/8"• Material: 4130• Thread: 3/8"-16 RH

Faceplate for 11" rear end housing. For wide 4-link centers.Specifications:• Thickness: 3/8"• Material: 4130• Thread: 3/8"-16 RH

Mark Williams Enterprises 2-1/2" fill cap & bung with external threads. Cap is black anodized and includes rubber o-ring.

Aluminum 2-1/2" O.D. cap with o-ring seal.  Aluminum bung with internal threads. Available in plain black or RJ logo. Most commonly used for aluminum fuel tanks.

Aluminum 2-3/4" O.D. cap with o-ring seal.  Steel bung with internal threads. Available in plain black or RJ logo. Most commonly used on rear end housings.

Long Housing ends for 2-piece axle, 2.100" wide. These housing ends are required when using the new Strange 2-Piece axles. Long end available for retrofitting housings. Sold as a pair.

ApplicationTwo Piece Pro Stock Axle DescriptionStrange Housing EndSold as each Features• 4130 billet chrome moly steel• Butt weld design• For 3 1/4″ or 3 1/2″ OD tubing• Black oxide finish• Designed & machined...

.250 thick 1018/1020 mild steel

Welds to 3" diameter rear end housing and works with most leaf springs. Sold each.

40 spline Hybrid Spindle floater kit for 4.75 bolt pattern with carbon brakes. ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight,...

ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending loads, and tire shakeAxle shafts only requirement is to transfer...

40 spline Hybrid Spindle floater kit for 5 bolt pattern with carbon brakes. ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending...

ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending loads, and tire shakeAxle shafts only requirement is to transfer...

40 spline Big Spindle floater kit for 5.5 bolt pattern with carbon brakes ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending...

ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending loads, and tire shakeAxle shafts only requirement is to transfer...

5# Pressure-Relief Vent 1/8" Ptf Male, 1/2" Overall Height, 1 To 5 Psi

Material .375" 4130

The fill cap is made of aluminum and bung is made of steel with internal threads.       See image for I.D and O.D   

Our new 9" Ford differential gasket consists of a rubber coated .032 aluminum core.

Bearings and retaining ring for the double row housing ends.Sold as a pair.

Double Row Housing & Bearings Kit w/ Seals

Seals for use with the double row housing ends.

DescriptionStrange Housing Ends RequiresO-ring style ball bearings or Outer seal unit bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed...

Floater Spindle 13.5" 4.75" - 5" Bolt Circle Sold each.

Floater Spindle 13.5" 5.5" Bolt Circle 2013 plus Sold each.

Ford 8.8 weld-on housing ends for 3.150 bearing- pr. ApplicationHousing Using Mustang Brakes1986-1993 drum brakes DescriptionStrange Housing EndsSold as pair RequiresO-ring style ball bearings or Outer seal unit bearingsBacking Plate Hole Needs To Be...

.062" thick 4130 Width 8-1/2"  

Housing Stud Kit includes Quarter-Max housing press-in face studs, Nylok nut 3/8"-24 grade 8, and 3/8" AN washer.

1/32" thick 9" Ford differential gasket with steel core and a nonstick coating.

Thickness .090 Made from 4130

Material 0.90" 4130

3-1/2" Thick 4130

.125" Thick CRMS This bracket was made to support you axle tube inside your rear end housing.

DescriptionStrange Housing EndsSold as pair RequiresO-ring style ball bearings or Outer seal unit bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish•...

DescriptionStrange Housing EndsSold as pair Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by Strange• Material forged in the USA...

Bronze/Steel Breather Filter Vent 1/8" NPT Male, 7/16" Length, 7/16" Hex Size.

DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Designed & machined by Strange• Material made in the USA...

DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by...

This tool is designed to help you find the exact pinion center line of your rear end housing. Use this tool when you install your brackets on your rear end housing or install your housing ends. It bolts to the face of your rear end housing and has a slot...