Nitrous Plumbing & Accessories

This is a great addition to anyone’s nitrous kit that may have came with a -4 line set up. Most kits sold with a -4 line are limited to around 250 HP. Going to this I-S upgrade line kit will help better support the nitrous side of any kit, as well...

Specifications:• I.D.: .384"• O.D.: .500"• Width: .825"• Material: 4130• Commonly used for NOS mount

1.5 Inch Liquid Filled Gauge – Induction Solutions gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and time again. They are constructed of a very clean looking...

2.5 Inch Liquid Filled Gauge – Induction Solutions gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and time again. They are constructed of a very clean looking...

Induction Solutions 4 Cylinder Plumb Kit includes everything to completely plumb the manifold and hook a nitrous and fuel feed line up to. The parts included are:• 4 Stainless Steel 90° Nozzles• 8 12″ Stainless Steel Hard Lines•...

Induction Solutions gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and time again. Constructed of a very clean looking stainless steel housing, these exceptional...

This Induction Solutions plumb kit includes everything to completely plumb your manifold and hook nitrous and fuel feed lines up to. Includes:• 6 Stainless Steel 90° Nozzles• 12 12″ Stainless Steel Hard Lines• Filtered Fuel and...

1/8 NPT inlet with Stainless Steel outlet fittings to accept 3/16 compression fitting.

Features:• All hardware pictured• Measures 3.75" x 2.25"• Saves manifolds when you have a nitrous backfire• Reseals itself after each backfire unlike the majority all other burst panelsMade in the USA.

This kit is for the racers who have an existing kit and wants to just re-plumb the hardlines, or maybe for the guy that wants to upgrade from the old Zinc plated lines. This kit has all the Stainless Steel tubing, B-nuts, sleeves, Brass nuts, and Brass...

Induction Solutions new soft line nitrous plumb kits have the potential to flow from 100-500+* HP! These kits have multiple options including different nozzles, solenoids, and tunes. All kits come with our laser cut weld-on solenoid brackets, two shower...

This is similar to Induction Solution's traditional distribution block but these are machined with an 1/8 NPT port on each side, allowing for use of any 1/8 NPT accessory and is roughly 3/8″ longer than the traditional blocks. A Dual Port...

The Induction Solutions Stainless Steel high flow Quarter Turn Valve, nitrous shut off has PTFE seals. It is a great addition to your nitrous system. This valve, matched with their in line nitrous pressure gauge, is a great safety valve as well as a...

This Induction Solutions nitrous plumb kit is adjustable from 100 to 500+ HP. These nitrous plumb kits are built with the best components in the business. Stainless Steel nozzles, Stainless Steel tubing, and Stainless Steel jets for 150, 200, and 250 HP...

Quarter-Max 2000 PSI inline valve assembly with -6 male fittings and -3 male for optional pressure gauge.

Water injection is becoming increasingly popular in today’s race cars. By injecting a fine mist of water it drastically reduces the chance of detonation during a run. The water, while in a gaseous state, can absorb enormous amounts of heat and also...

Water injection is becoming increasingly popular in today’s race cars, by injecting a fine mist of water into your engine it drastically reduces the chance of detonation occurring during a run. The water, while in a gaseous state, can absorb...

Water injection is becoming increasingly popular in today’s race cars, by injecting a fine mist of water into your engine it drastically reduces the chance of detonation occurring during a run. The water, while in a gaseous state, can absorb...

The Induction Solution universal motorcycle nitrous plumb kit is the best of its kind! If you are looking to add power using high quality parts this is the kit for you! The kit includes a nitrous and fuel solenoid, four 90° stainless steel nozzles,...

Save weight by switching out your steel nitrous ball valve handle to this Quarter-Max aluminum ball valve handle.• Material: 5052 aluminum• Thickness: .125"• Style: Raw or black anodized

Features: • 0-1500 PSI• Liquid filled• 1/8" NPT• 1.5" white face Made in the USA.

This is a kit for anyone who has bought a plate system or manifold with a direct port installed and needs the rest of the nitrous system. This Completion Kit includes a complete bottle including Racer Safety, 1 1/2″ gauge, and a -6 bottle nut (your...

NOS Bolt On Mount. This is the bracket only.

Weld this lightweight bracket to your chassis to hold your NOS valve. Specifications:• Material: Steel Note: Valve sold separately.

Weld this lightweight bracket to your chassis to hold your Induction Solutions High Flow Quarter Turn Valve for Nitrous Oxide Systems IND-19705. Specifications:• Material: Steel Note: Valve sold separately.

The I-S Single Stage EFI Dry Nitrous Plumb Kits are designed for use on modified V8 engines. The system includes their .120 Bottom Exit Nitrous solenoids, stainless steel lines, stainless steel jets, and hardware to complete the installation on your...

Induction Solutions soft line nitrous plumb kits have the potential to flow from 100-500+* HP! These kits have multiple options including different nozzles, solenoids, and tunes. All kits come with their .184 Bottom Exit Fuel solenoid, laser cut weld-on...

The Two Solenoid Remote Mount Plumb Kit is perfect for racers class restricted to two solenoids or looking for a cost effective way to add small horsepower nitrous tune ups to their cars. This kit includes a Trash Can solenoid, .187 fuel solenoid,...

INDUCTION SOLUTIONS 2 STAGE EFI DRY NITROUS PLUMB KIT (100-1,000 ADDED HP) – Plumb up your own 2 stage dry direct port nitrous system! The I-S Two Stage Dry Direct Port Plumb Kits are designed for use on modified V-8 engines. Both stages include...

This kit is perfect for street car setups and/or someone who is completely new to nitrous and is just looking to spray small horsepower. The kit includes everything to install, then you just have to fill your bottle, hook it up and run it! This is the...

This universal wet single nozzle nitrous kit is perfect for street car setups and/or someone who is completely new to nitrous and is just looking to spray small horsepower. The universal wet single nozzle nitrous kit includes everything to install, then...

Designed to use as a water injection tank on Nitrous Oxide systems. Includes a threaded on cap with a pressure release valve. - Aluminum- 100 psi max- No relief valve in tank- Holds ½ quart