Bushings

063 step busing   Fits a 1/2" hole, reduces to 3/8".

This bushing allows for the use of a 3/8" bolt in a 1/2" hole. It also adds .063" to the height of the hole.

.125 4130 Step Bushings Fits 1/2" hole, reduces to 3/8"

This bushing allows for the use of a 3/8" bolt in a 1/2" hole. It also adds .125" to the height of the hole.

.188 4130 Step Bushings Fits 1/2" hole, reduces to 3/8"

This bushing allows for the use of a 3/8" bolt in a 1/2" hole. It also adds .188" to the height of the hole.

.282 4130 Step Bushing Fits 1/2", reduces 3/8"

.380" ID  .520" OD  .687" OD

Dimensions for bushing Inside Diameter 0.385" Outside Diameter 0.625" Length 1.00"

Dimensions Inside Diameter 0.402" Outside Diameter 0.500" Length .700"

Dimensions Inside Diameter 0.402" Outside Diameter 0.500" Length 0.825"

Dimensions Inside Diameter 0.406" Outside Diameter 0.625" Length 0.750

4130 Bushing .188w x .625 O.D. x .375 I.D.

Dimension Inside Diameter 0.652" Outside Diameter 0.750" Length 0.700"

Specifications:• ID: 0.500"• OD: 0.750"• Diameter: 0.625"• Material: 4130• Application: Wheelie Bar Wheel Housing

Specifications:• ID: 0.500"• OD: 0.750"• Diameter: 0.625"• Material: Titanium• Application: Wheelie Bar Wheel Housing

This bushing is designed to add mis-alignment to rod ends with 1/2" holes without changing the required bolt diameter.

O.D.:   3/4" I.D.:   1/2" Width:   1/2"

O.D.:   3/4" I.D.:   1/2" Width:   7/8"

O.D.:   5/8" I.D.:   1/2" Width:   3/16"

O.D.:   5/8" I.D.:   1/2" Width:   3/4"

O.D.:   5/8" I.D.:   1/2" Width:   5/16"

This bushing allows you to sleeve a 3/4" bolt hole to accept 1/2" diameter bolts.

O.D.:   1/2" I.D.:   3/8" Width:   1"

0

Weld this bushing into the chassis to mount your midplate/midmount.Specifications:• 3/8" ID• 5/8" OD• 1-5/16" W• .120" Wall• Material: 4130

Diameter:   5/8" Inside Diameter:   3/8" Width:   1/4"

O.D.:   3/4" I.D.:   5/8" Width:   7/8"

This delrin pedal bearing replacement fits in our pro series pedal mounts. Designed to save weight over steel pedal bearings.Specifications:• OD - 2.05"• ID - 1"• Width - .784"

.125" Mildsteel plate

Weld bushings into chassis to mount your midplate.Top: ID 1.00" OD 1.25" Wide 1.37"Bottom ID .375   Sold each

• Inside Diameter: 0.384"• Outside Diameter: 0.500"• Length: 0.825"

Dimensions: Inside Diameter 0.385" Outside Diameter 0.495 Length 0.156" Outside Diameter 0.625 Length 0.844"

This insert reduces down the front case bolt holes (from 1/2” to 3/8”) on all transmissions. Heat treated steel.   Dimension: OD Outer .799" OD Inner .562" ID .406" Width .600" Step Height .152"