Hood Scoop Accessories

The Braswell 7520 2.500" aluminum tray is cut on a water jet for a precise fit. It's 2-piece design allows the pieces to overlap in the middle to be bolted or riveted together. They are designed to fit most brands of spit carburetors. Made from .050"...

Made of .050” 5252 aluminum. Select engine style:• Part #410755 is designed for Braswell 7520 split carburetors on a Reher-Morrison 5.300” bore spacing nitrous engine.• Part #410755-1 is designed for Braswell 7520 split carburetors...

Made of carbon fiber.  Molded to fit in a Mach 5 Low Back Hood scoop with Dominator carburetors on a 9.800" center-to-center hole spacing.  

Made of carbon fiber.  Fits Braswell 7390 carburetors (8.00" diameter) on a 9.800" center-to-center hole spacing.

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary. Fits the 211915 D-Opening Pro Mod Low Back Fiberglass Hood Scoop and the...

Use to mount your carburetor to the hood or hood scoop. Designed with a radius .600 to the carburetor to improve flow. Sold each.

This universal carbon fiber isolator pan is molded to fit Dominator carburetors with a 9.800" center-to-center hole spacing.  Trim to fit any hoodscoop.

Made of .040" 5252 aluminum.Designed with a radius angle to the carburetor for better airflow. Custom spacing available. Please specify your center-to-center hole spacing when ordering.

Designed for the Holley 4500 dominator series carburetors. The ring fits on top of the flange of the carburetor and has a seal lip on top of the ring to fit isolator trays or air cleaners. Our carburetor spacer rings are a perfect solution if you are...

Designed for the Holley 4500 dominator series carburetors. The ring fits on top of the flange of the carburetor and has a seal lip on top of the ring to fit isolator trays or air cleaners. Our carburetor spacer rings are a perfect solution if you are...

Designed for the Holley 4500 dominator series carburetors. The ring fits on top of the flange of the carburetor and has a seal lip on top of the ring to fit isolator trays or air cleaners. Our carburetor spacer rings are a perfect solution if you are...

This aluminum tray is designed to fit the split Holley Dominator or similar carburetors. It is cut on a water jet for a precise fit. It's 2-piece design allows the pieces to overlap in the middle to be bolted or riveted together. Made from .050" 5052...

This hood scoop inner pan is designed to fit QM hood scoops only. It features a ramp and are rolled-up in the back for better air flow. Attach to the hood scoop by using fiberglass and bolt to a carburetor isolator tray for improved air delivery to the...

This hood scoop inner pan is designed to fit QM hood scoops only. It features a ramp and are rolled-up in the back for better air flow. Attach to the hood scoop by using fiberglass and bolt to a carburetor isolator tray for improved air delivery to the...

This hood scoop inner pan is designed to fit QM hood scoops only. It features a ramp and are rolled-up in the back for better air flow. Attach to the hood scoop by using fiberglass and bolt to a carburetor isolator tray for improved air delivery to the...

Designed to be fully adjustable, this kit mounts to the front engine plate and mid mount. Comes with tubing, mounting plate, hitch pins, eye bolts, cap screws, and lock nuts.

Hood Scoop Stand Plate

The Hood Scoop Stand Kit provides you with a sturdy and efficient way to mount your hood scoop to your carburetors or directly to your intake manifold. The panel doublers prevent chipping or fraying over time and the winged fasteners allow for a quick...

Our Hood Scoop to Carburetor Mount Kit makes mounting your hood scoop easy. Simply screw it into the air cleaner boss on your carburetor and quarter turn fasten the scoop down to it.5/16” coarse thread.Requires one kit per carburetor.

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits: K&N-100-8517 K&N Carbon Fiber Hood Scoop.

This is lightweight pure carbon fiber inner pan can be trimmed to fit your hood scoop.

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211901 QM F1 Carbon Fiber/Fiberglass Hood...

Our new e-glass inner pans make assembling a hood scoop as easy as it can get. This glass pan is molded to fit the inside of the QM F1 Hood Scoop, no more fiberglassing to the inside of the scoop. Cuts hours off assembly time! Cut out the recessed...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits the 211902 QM F1-2 Carbon Fiber/Fiberglass Hood Scoop and...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary. Fits:• QM-211904 QM F1-4 Carbon Fiber/Fiberglass Hood Scoop• QM-211904-1...

Our new e-glass inner pans make assembling a hood scoop as easy as it can get. This glass pan is molded to fit the inside of the QM F1-4 Hood Scoop, no more fiberglassing to the inside of the scoop. Cuts hours off assembly time! Cut out the recessed...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211911 QM Mach 5 Low Back Carbon Fiber/Fiberglass Hood Scoop•...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211912 QM Mach 5 Wide Carbon Fiber/Fiberglass Hood Scoop• 211912-1...

Made of .040" 5252 aluminum.   Designed with a radius angle to the carburetor for better airflow. 

Mount your carburetor isolator tray quickly and easily to your carburetor instead of to your inner pan. Kit includes a single 7/8" dominator isolator tray, stands and hardware. Stands attach to the isolator tray with 6-32 bolts and are secured to your...

Mount your carburetor isolator tray quickly and easily to your carburetor instead of to your inner pan. Kit includes a single 5-1/8" HP carburetor isolator tray, stands and hardware. Stands attach to the isolator tray with 6-32 bolts and are secured to...

Use to mount your carburetor to the hood or hood scoop. Designed with a radius .600 to the carburetor to improve flow. Sold each.