RPM & Power harness for your V300/V300SD/V500/V500SD. This harness provides the necessary connections for:• Engine RPM• Driveshaft RPM• Clutch RPM• Record Button• Power Connects to the 'RPM' port of the data logger.

V-Net Module Only, Pressure, 5 volt.This replacement V-Net module is used to monitor a variety of pressures. This is the same module as used with our analog and digital sensor/module combination assemblies. The difference here being that these modules...

V-Net Module Only, Event Marker Input, Switch Closure, 12 Volt. This module allows you to monitor a 12 volt event, such as the release of a powered button. Not for use with a contact closure switch.

This V-Net adapter module allows users to monitor 4 analog inputs from a Racepak transducer box (PN: RAC-810-MB-08P).

V-Net Module with Sensor, Pressure, 0-300 PSI. These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been pre-programmed. In other words they have not been...

Temperature, Air, 0-300°F.This V-Net module allows you to measure air temperature, 0-300°F. Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a...

Pressure, Wheelie Bar, Right, 0-5000 PSI.Wheelie bar pressure is useful when trying to determine whether or not the chassis is "unloading" when launching. Used in conjunction with the Racepak wheelie bar load cell, these sensors clearly show how hard the...

Pressure, Transmission, 0-500 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical...

  These general purpose turbine-type flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. Use of a flow meter and DataLink's math channel capabilities allows you to monitor the health of your fuel pump as well as...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and provides a .5 to 4.5 volt output signal. Each transducer...

The original series transducer modules provide a variety of inputs from pressure and temperature, to voltage and strain gauge readings. These transducers are designed to be used in conjunction with a V-Net transducer box (810-MB-8P) or the Pro...

ALJM3, Male Rod End Body - Aluminum, 7075-T6, hard anodized redBall - 52100 steel, heat treated, hard chrome platedRace - Steel alloy, heat treated, zinc plated, chromate treated Specifications:• Thread Type: Right Hand• Thread Configuration:...

10-32 LH Aluminum Jam Nut Specifications:• Thread Size: 10-32• Hex Size: 3/8 in.• Width: .160 in.• Material: AluminumSold individually.

This Spark Plug Holder will hold your eight spark plugs when you take them out of your engine. Made from .063” aluminum. There's an "F" cut in the design to designate the front of the engine.The plugs rest in rubber grommets to help keep them from...

The IQ3D is designed for the sportsman drag racer looking for a compact, all-in-one solution. It combines the look and feel of Racepak's popular IQ3 dash with a robust, built-in data logger. Information is displayed on four user-definable pages and...

5/16 in. Self-Ejecting Flush Slotted Head Quarter Turn Fastener, Aluminum, Black Anodized, .500 in. Grip LengthSpecifications:• Head Type: Slotted• Head Style: Flush• Style: Self-Ejecting• Diameter: 5/16 in. (#5)• Grip Length: ...

7/16 in. Self-Ejecting Flush Slotted Head Quarter Turn Fastener, Aluminum, Black Anodized, .500 in. Grip LengthSpecifications:• Head Type: Slotted• Head Style: Flush• Style: Self-Ejecting• Diameter: 7/16 in. (#6)• Grip Length: ...

This steering wheel button mount features two mounting positions so you can mount two buttons in one central location. This mount fits our line lock button 206114. Includes hardware. Specifications:• Material: Aluminum• Color: RawSold...

These linear travel sensors are designed to monitor even the slightest amount of shock travel or tire shake. These sensors can also be used to determine throttle or clutch position.

These linear travel sensors are designed to monitor even the slightest amount of shock travel or tire shake. These sensors can also be used to determine throttle or clutch position.

These linear travel sensors are designed to monitor even the slightest amount of shock travel or tire shake. These sensors can also be used to determine throttle or clutch position.

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. Interface cables use a...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

ApplicationDana 60 with 35 spline axlesUsing a gear ratio designed for 5 series carriers DescriptionEaton 35 Spline Detroit TruetracA helical gear differential that offers smooth power transfer FeaturesTorque Biased Mechanical Unit• Helical gear...

ApplicationDana 60 with 35 spline axlesUsing a gear ratio designed for 3 series carriers DescriptionEaton 35 Spline Detroit TruetracA helical gear differential that offers smooth power transfer FeaturesTorque Biased Mechanical Unit• Helical gear...

ApplicationDana 60 with 35 spline axlesUsing a gear ratio designed for 5 series carriers DescriptionEaton 35 Spline Detroit LockerA very strong mechanical differential FeaturesTorque Sensitive Mechanical Unit• Automatic locking differential•...

ApplicationDana 60 with 35 spline axlesUsing a gear ratio designed for 3 series carriers DescriptionEaton 35 Spline Detroit LockerA very strong mechanical differential FeaturesTorque Sensitive Mechanical Unit• Automatic locking differential•...

Driveshaft Loop, 360 Degree, 9 in. x 6.5 in., Rectangle Tube, Mild SteelDriveshaft loops, along with driveshaft covers, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12 in...

Driveshaft Loop, 360 Degree, 11 in. x 6.5 in., Rectangle Tube, Mild SteelDriveshaft loops, along with driveshaft covers, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12...

Driveshaft Loop, 360 Degree, 6.5 in. x 6.5 in., Rectangle Tube, Mild SteelDriveshaft loops, along with driveshaft covers, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12...

The QM Extreme Pro Series Low Profile Wheelie Bar Kit is an exclusive QM design. The design makes the top and bottom wheelie bar tubes in more of a straight line with the wheelie bar wheel, which makes the wheelie bars stiffer and the result will make...

ApplicationPro Mod VehiclesUsing 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers DescriptionUltra 4-Link Modular Floater Housing AssemblyIncludes 2 piece steel rotors & aluminum caliper...

This Stroud Safety Window Net is manufactured and designed to meet & exceed strict SFI specifications to ensure your safety inside the driver's compartment.  Dimensions: 24 in. W x 24 in. F x 18 in. RAvailable Colors:• Black•...

Driveshaft Loop, 180 Degree, 12 in. x 6.5 in., Rectangle Tube, Mild SteelDriveshaft loops, along with driveshaft covers, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12...