28-31 Spline Alloy Axle Package with Axle Bearings & 1/2" Stud Kit

lloy axle packages are optimized for street & track use
See our Hy-Tuf axles for maximum torsional strength for all out Drag Racing

Application Splines Available
Chevy 8.2 10 bolt…… 28 / 33 **
Chevy 8.5 10 bolt…… 28 / 30 / 33 **
Chevy 12 bolt car…… 30 * / 33 ** / 35 ***
Dana 60…………………. 35 ***
Ford 8.8…………………. 28 / 31 * / 33 ** / 35 ***
Ford 9″…………………… 28 / 31 / 35 ***
Mopar 8 3/4…………… 30 / 35 ***
57-64 Olds/Pontiac… 35 ***
* Also available in c-clip style axles
** 33 spline Alloy packages…….. P3302
*** 35 spline Alloy packages…….. P3502

Notes For This Axle Package
All Chevy & Ford 8.8 require replacement 3.150″ housing ends
Packages with C-clip Eliminator kit for OEM housing ends are shown below

Dana 60 & Mopar 8 3/4″ Using Stock Style Housing Ends
Require packages that include retainer plates listed below

This Axle Package Includes:
Alloy Axles – A3100
• Forged from modified 1550 premium steel
• Majority of machining performed before heat treat to provide consistent hardness
• Induction hardened to Rc 58-62 to increase torsional strength while remaining ductile
• Finish machined after heat treat to ensure accuracy
• Choice of 28 up to 31 spline
• Lengths up to 34 1/2″
• Choice of bolt circle
• Forged in the USA
• Designed and machined by Strange Engineering

Choice of Axle Bearings Maybe Limited To Housing End Type

Timken® Tapered Unit Bearings – A1013
• Designed for use with 3.150″ housing end
• Best for side loading and high mileage
• Includes outer seals and locking collars
Note- May require new retainer plates if originally use a ball style bearing

Sealed Ball Bearings – A1021 / A1023A
• Low friction bearing
• Life reduced during prolonged use
• O.D. grooved for o-ring to eliminate inner axle seal
• Includes o-rings and locking collars

Choice of Press-in or Screw-in Wheel Studs
• Press-in 7/16″-20 or 1/2″-20 OEM style factory length studs – A3130 / A3121 / A3151
• Screw-in 1/2″-20 chrome moly studs in 2″ or 3″ long – A1025 / A1026
• Metric screw-in studs in M12-1.5 x 50mm – A1035
• Screw-in studs include .060″ hardened washers
• Length is measured from underneath the hex of the stud

Options
Install axle bearings…………………. A1008
Access hole or extra bolt circle… A1004

Other 28-31 Spline Alloy Axle Packages
With retainer plates…. P3104
With spool……………….. P3102S / P3104S

Alloy C-clip Style Replacement Axles
GM 12 bolt….. P3020 / P3026
Ford 8.8………. P3110 / P3111 / P3112

Street / Track Axle Packages With C-Clip Eliminator Kit
OEM Chevy car ends in 30, 33, or 35 spline……………… P1011GOT
OEM Ford 8.8 ends in 28 or 31 spline…….. P3109F86 / P3109F94 / P3109F05
OEM Ford 8.8 ends in 35 spline……………… P3509F86 / P3509F94 / P3509F05

Pro Race Axle Packages
With bearings & studs………….. P1007
Including retainer plates………. P1008

Click here to fill out the required Axle order form.