33 Spline Alloy Axle Package with Axle Bearings & 1/2" Stud Kit

Alloy axle packages are optimized for street and track use
See our Hy-Tuf axles for maximum torsional strength for all out Drag Racing

Applications For 33 Spline Alloy Axles
Chevy 8.2 10 bolt
Chevy 8.5 10 bolt
Chevy 12 bolt car
Ford 8.8

Notes For This Axle Package

Lengths available are for factory width housings only
Splines fit Strange spools and Yukon or Eaton clutch style differentials
Will not work with any other spools or differentials

All applications require replacement 3.150″ housing ends
Packages with C-clip Eliminator kit for OEM housing ends are shown below

This Axle Package Includes:
Alloy Axles – A3100
– Forged from modified 1550 premium steel
– Majority of machining performed before heat treat to provide consistent hardness
– Induction hardened to Rc 58-62 to increase torsional strength while remaining ductile
– Finish machined after heat treat to ensure accuracy
– 33 spline with 3″ spline length
– 28 7/8″, 29 1/8″ or 29 5/8″ lengths available
– Choice of bolt circle
– Forged in the USA
– Designed and machined by Strange Engineering

Choice of 3.150″ OD Axle Bearings

Timken® Tapered Unit Bearings – A1013
– Best for side loading and high mileage
– Includes outer seals and locking collars

Sealed Ball Bearings – A1021
– Low friction bearing
– Life reduced during prolonged use
– O.D. grooved for o-ring to eliminate inner axle seal
– Includes o-rings and locking collars

Choice of Press-in or Screw-in Wheel Studs
– Press-in 7/16″-20 or 1/2″-20 OEM style studs in factory lengths – A3130 / A3121
– Screw-in 1/2″-20 chrome moly studs in 2″ or 3″ long – A1025 / A1026
– Metric screw-in studs in M12-1.5 x 50mm – A1035
– Screw-in studs include .060″ hardened washers
– Length is measured from underneath the hex of the stud

Options
Install axle bearings…………………. See A1008
Access hole or extra bolt circle… See A1004

Other 33 Spline Alloy Axle Packages
With retainer plates…. See P3304
With spool……………….. See P3302S / P3304S

Street / Track Axle Packages With C-Clip Eliminator Kit
OEM Chevy car ends in 30 or 33 spline…………….. See P1011GOT
OEM Chevy car ends in 35 spline……………………… See P3509G12
OEM Ford 8.8 ends in 28 or 31 spline… See P3109F86 / P3109F94 / P3109F05
OEM Ford 8.8 ends in 35 spline…………. See P3509F86 / P3509F94 / P3509F05

Pro Race Axle Packages
With bearings & studs……. See P1007
Including retainer plates… See P1008

Click here to fill out the required Axle order form.