Eaton HD clutch GM 8.5 / 28 spline / 01-085728 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 28 Spline Posi UnitA perfect...

Eaton HD clutch GM 8.5 / 30 spline / 01-085530 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect...

Drag Race Use Only For Hub Mount WheelsChoice of 4 1/2″ or 4 3/4″ bolt circle Springs Are Not IncludedAccepts 2 1/2″ OD x 14″ springs – Sold separately Dimensions22.690″ – Extended16.290″ – Compressed...

Complete Center Section Includes: N2205 / N22063.062″ Bore S-Series Case used for 28 or 31 spline3.250″ Bore S-Series Case used for 35 spline 8-10% stronger material than factory nodular ironCritical areas reinforcedHeavy duty main caps and...

Alloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Applications For 35 Spline Alloy AxlesChevy 12 bolt carDana 60Ford 8.8Ford 9″ (requires 3.250″ bore...

lloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Application Splines AvailableChevy 8.2 10 bolt…… 28 / 33 **Chevy 8.5 10 bolt…… 28 / 30 / 33...

ApplicationStrange B3359 / B3359TA / B3360 / B3360TA master cylindersOEM Mopar K car master cylinder and aftermarket replacements Allows use of 3 AN brake lines common to Drag Racing For 9/16″-20 to 3 AN – See P2357

Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...

Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...

2005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 1/2″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...

2005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 5/8″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...

Keep your differential clean and ready to go using Strange differential storage cases. They are shaped and molded to fit your differential solidly inside. The cases include straps and mounting hardware to keep the two halves sealed together.

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are necessary...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.150″ ID housing ends are necessary...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are necessary...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

ApplicationFord 9″ with 31 spline axles DescriptionEaton 31 Spline Detroit TruetracA helical gear differential that offers smooth power transfer FeaturesTorque Biased Mechanical Unit• Helical gear design• Smooth, automatic...

ApplicationFord 9″ with 31 spline axles DescriptionEaton 31 Spline Detroit LockerA very strong mechanical differential FeaturesTorque Sensitive Mechanical Unit• Automatic locking differential• Clutchless & maintenance free•...

Eaton Detroit Locker Differential, Fits 9" Ford with 35 Spline Axles, Requires Aftermarket 3.250" Bore Case ApplicationFord 9″ with 35 spline axles RequirementsAftermarket 3.250″ bore caseAxles with 30 degree pressure angle DescriptionEaton...

Kit for N1922 / N2322 supports using 28 spline pinion ApplicationStrange pinion supports N1922 / N2322Using a 28 spline pinion shaft Using a 35 spline pinion shaft? – See N1924 Kit IncludesTimken® front pinion bearing – N1930Adjustable...

Tapered Bearing Pinion Support, Fits 9" Ford Center Sections Used for Drag Racing ApplicationDrag Race Use Only For Street or Street & Strip – See N1917P FeaturesForged 2024-T351 aluminum bodyClear anodized finishMachined for oversized...

Strange Ball Bearing Pinion Support, Includes Bearings & Seal For 35 Spline Pinion, Fits 9″ Ford Center Sections Used For Drag Racing ApplicationDrag Race Use Only FeaturesForged 2024-T351 aluminum bodyClear anodized finishMachined for front...

ApplicationStrange Ultra Case and HD Pro Case BenefitThe load bolt offers additional support during extreme conditions such as tire shakeThe steel tip is initially adjusted very close to the backside of the ring gearIf deflection occurs, it provides...

Ford 8.8 pro clutch 31 spl. Traction Lock ApplicationFord 8.8 with 31 spline axles DescriptionEaton Heavy Duty 31 Spline Posi UnitA perfect replacement for worn-out OEM clutch differentials Features• Heavy duty casting• Carbon clutch...

ApplicationFord 8.8 with 31 spline axles DescriptionEaton 31 Spline Detroit LockerA very strong mechanical differential FeaturesTorque Sensitive Mechanical Unit• Automatic locking differential• Clutchless & maintenance free• Strong...

ApplicationStrange 11″ & 11.5″ Carbon Brake Kits With 4 Piston Calipers SpecificationsNew – .450″Discard – .200″ ContaminationMaterial is easily contaminated by fluidsKeep sprays away from pads and rotorsOnce...

Ford 8.8 weld-on housing ends for 3.150 bearing- pr. ApplicationHousing Using Mustang Brakes1986-1993 drum brakes DescriptionStrange Housing EndsSold as pair RequiresO-ring style ball bearings or Outer seal unit bearingsBacking Plate Hole Needs To Be...

40 spline Hybrid Spindle floater kit for 5 bolt pattern with carbon brakes. ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending...

ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending loads, and tire shakeAxle shafts only requirement is to transfer...

40 spline Hybrid Spindle floater kit for 4.75 bolt pattern with carbon brakes. ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight,...

ApplicationDrag Racing RequirementsHousing with 3 1/4″ or 3 1/2″ OD tubingCustom floater axles – Sold Separately Safety BenefitsHousing supports weight, bending loads, and tire shakeAxle shafts only requirement is to transfer...

Pro spool -Aluminum 40 spline Ford 9″ (3.812″ bore case ) ApplicationFord 9″ DescriptionHD Pro Series SpoolFor 40 spline axlesFits 3.812″ bore aftermarket case Features• Machined from 7075-T6 billet aluminum• Lightened...

Pro spool -L/W Steel 40 spline Ford 9″ (3.812″ bore case) ApplicationFord 9″ DescriptionHD Pro Series SpoolFor 40 spline axlesFits 3.812″ bore aftermarket case Features• Machined from 8620 forged steel• Lightened to...

ApplicationFord 9″ DescriptionS-Series SpoolFor 35 spline axlesFits 3.250" bore case Features• Manufactured from 8620 forged steel• Broached for 35 spline axles with 30° pressure angle• Same spline locations as OEM...

ApplicationFord 9″ DescriptionS-Series SpoolFor 31 spline axlesFits 2.891″ or 3.062″ bore case Features• Manufactured from 8620 forged steel• Broached for Ford 31 spline axles• Same spline locations as OEM...

Strange Spindle Mount Front Carbon Brake Kit, 2 in. Piston Strange Ultra Struts & Penske Struts, Fits One Piece Billet or Forged Spindle Mount Wheels Designed Specifically For Drag Racing Strange Ultra Struts / Penske StrutsWith one piece forged or...

Pro carbon 5″ bolt circle completion kit- No caliper mounts Carbon Brake Completion KitSupplies remainder of brake components for P1018 / P1020 axle packages This Strange rear brake kit includes:11″ carbon rotors – C17905″ BC...

Pro carbon 4 3/4″ bolt circle completion kit- No caliper mounts Carbon Brake Completion KitSupplies remainder of brake components for P1018 / P1020 axle packages This Strange rear brake kit includes:11″ carbon rotors – C17904 3/4″...