New Mark Williams 3” 4130 steel driveshaft 1350 U joints 37.5” c to c U joints MW 39013-J Lenco 32 spline slip yokeAll clearance item sales are final. Non-returnable.

RT-S - S76 Weld Street & Strip, Low Pad Specifications:• Wheel Diameter: 17 in.• Wheel Width: 10 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black Center - Polished Shell• Manufacturers Wheel...

Quarter-Max is now an authorized dealer for Art Morrison Enterprises.Not included: shocksIncludes:• Part # 67690000 - 67-69 CAMARO/FIREBIRD / 68-74 NOVA GT FRONT BOLT IN CLIP; BODY MOUNTS OEM; FRONT BUMPER MOUNTS; CORE SUPPORT; ENGINE MOUNT TOWERS;...

There’s no doubt that this is the most versatile setup for both street rods and GT-type cars as it provides excellent rear end control in both acceleration and handling situations due to stabilizing both housing rotation and side loading...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

8 Gallon Pro Modified Fuel Cell Features:• Seamless cross-linked polyethylene outer shell• Aircraft style flush mount cap assembly • NO safety foam Specifications:• Style: Pro Modified• Size: 8 gallon• Dimensions: 14" L x...

Add a stealth look to your Ford 5.0L with an MSD Black Pro-Billet Distributor. This is a direct drop-in replacement for 86-93 5.0L EFI engines. When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links...

MSD’s Spark Guard is a dielectric grease that solves many common ignition troubles. It stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots, and even helps protect against radio noise (EMI). It also...

For use with GM style HEI distributors on V8 engines only. The MSD Digital Soft-Touch HEI Rev Limiter is designed to plug into nearly any HEI distributor and produces an accurate, smooth rev limiting action. The rpm limit is adjustable from 3,000 –...

Small diameter for extra clearance. Must be used with an MSD 6, 7 or 8-series ignition. Since many Chrysler enthusiasts use the B1 head or aftermarket valve cov­ers, these Pro-Billet Chrysler Distributors have been designed with a small diameter...

Low-profile racing distributor, must be used with an MSD 6, 7 or 8-series ignition and a crank trigger. The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark...

Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a screw for high rpm racing applications.Base included.Fits LP CT Distributors, PN 84697Click here to...

The MSD Race Tailored 8.5mm Super Conductor Wire Sets are designed specifically to fit race engines equipped with headers or an MSD Distributor. The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with...

For use with Chevy 366-454 with HEI Cap, Red jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire...

For use on 1999 LS1 Truck Engines, Red jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is...

For use on GM LS1 engines, Corvette, Camaro, '97-On, Red jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super...

For use on GM LS1 engines, Corvette, Camaro, '97-On, Black jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super...

For use on Chevy small block 350 engines, HEI, Red jacket. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor...

For use on Ford small-block engines with 302-351W, HEI boots, Red jacket. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of...

Set includes terminals for engines with early type (socket) and late type (HEI “spark plug top”) distributor caps. 90° boots and terminals factory installed on one end.Routing spark plug wires is an art form. It takes patience and time to...

Set includes terminals for engines with early type (socket) and late type (HEI “spark plug top”) distributor caps. 90° boots and terminals factory installed on one end.Routing spark plug wires is an art form. It takes patience and time to...

Application1480 series components IncludesU-Joint– Non-crossdrilled design– Improves strength & rigidity Snap Ring Assortment– Allows for yoke variations– Ensures tight fit Specifications1.375″ cap diameter4.188″...

ApplicationStrange 1480 Series Pinion Yoke – U2304 FEATURES: HEAT TREATED BILLET CHROME MOLY STEEL STRAPS65% tensile strength increase over an OEM strap ETD 150 STEEL STUDS90% tensile strength increase verses OEM u-bolts 12 POINT ARP DISTORTED...

ACD Split Shift Control Box • Upgrades any single RPM CO2 shifter for Turbo Action & any other single solenoid (A & E, Biondo, Dedenbear etc.)• Allow 1-2 and 2-3 shifts at different or the same RPM.• Microprocessor based control is...

V-Series 1-PC, Weld Racing Specifications:• Wheel Diameter: 17 in.• Wheel Width: 2.25 in.• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished• Manufacturers Wheel Series: Weld Pro Drag-1pc•...

V-Series 1-PC, Weld Racing Specifications:• Wheel Diameter: 17 in.• Wheel Width: 2.25 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black - Machined Accents• Manufacturers Wheel Series: Weld Pro...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 17 in.• Wheel Width: 2.25 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black - Machined...

The Quarter-Max Universal Carbon Fiber Belly Pan is 22-3/4" wide to span across even the widest of frame rail widths. Belly pan is designed to be trimmed to fit during installation between the engine midplate and transmission chassis crossmember...

For engines with late-model type (HEI “spark plug top”) distributor caps (Ford Duraspark or MSD Cap-A-Dapt). 90° spark plug boots installed with 90° distributor boots and terminals included. Routing spark plug wires is an art form. It...

Set includes terminals for engines with early type (socket) and late type (HEI “spark plug top”) distributor caps. Multi-angle boots and terminals factory installed on one end. Supplied with two 56”, two 50”, two 48” and...

To cover all your bases, these wire sets are supplied with both the boot and terminals that fit older, socket style distributor caps, as well as the ones for spark plug-style terminals. Supplied with two 56”, two 50”, two 48” and three...

For engines with late-model type HEI “spark plug top” distributor caps. Multi-angle boots and terminals installed on one end. 90° distributor boots and terminals included. Routing spark plug wires is an art form. It takes patience and...

Originally designed with NASCAR in mind, the 6ALN is equipped with the mandatory 6-Pin Weathertight connector to meet NASCAR’s ignition wiring rule, 20-6.1. This special connector provides a tight, positive locking connection with individual seals...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

18” long, 90° terminals and boots are installed on both sides to connect to an HEI style terminal. A power wower is also supplied to adapt a socket style cap. Features:• Coil Wire, Super Conductor