The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 17 in.• Wheel Width: 2.25 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black - Machined...

The Quarter-Max Universal Carbon Fiber Belly Pan is 22-3/4" wide to span across even the widest of frame rail widths. Belly pan is designed to be trimmed to fit during installation between the engine midplate and transmission chassis crossmember...

For engines with late-model type (HEI “spark plug top”) distributor caps (Ford Duraspark or MSD Cap-A-Dapt). 90° spark plug boots installed with 90° distributor boots and terminals included. Routing spark plug wires is an art form. It...

Set includes terminals for engines with early type (socket) and late type (HEI “spark plug top”) distributor caps. Multi-angle boots and terminals factory installed on one end. Supplied with two 56”, two 50”, two 48” and...

To cover all your bases, these wire sets are supplied with both the boot and terminals that fit older, socket style distributor caps, as well as the ones for spark plug-style terminals. Supplied with two 56”, two 50”, two 48” and three...

For engines with late-model type HEI “spark plug top” distributor caps. Multi-angle boots and terminals installed on one end. 90° distributor boots and terminals included. Routing spark plug wires is an art form. It takes patience and...

Originally designed with NASCAR in mind, the 6ALN is equipped with the mandatory 6-Pin Weathertight connector to meet NASCAR’s ignition wiring rule, 20-6.1. This special connector provides a tight, positive locking connection with individual seals...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Features:•...

18” long, 90° terminals and boots are installed on both sides to connect to an HEI style terminal. A power wower is also supplied to adapt a socket style cap. Features:• Coil Wire, Super Conductor

This special tool is an inexpensive way to make a set of custom plug wires. Provides a “die” to strip either 8mm Heli-Core or 8.5mm Super Conductor Wire, then can be used in a vise to provide a solid terminal crimp to the wire...

MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance as well as maximum protection against spark loss. Features:• Custom fit for make and model listed• Wires are precut to exact specifications•...

MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance as well as maximum protection against spark loss. Features:• Custom fit for make and model listed• Wires are precut to exact specifications•...

MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance as well as maximum protection against spark loss. Features:• Replacement boots and terminals

Multiport EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range. This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging and jamming. The...

Use with rotor PN MSD-8467. All MSD Extra Duty Distributor Caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Red Cap fits PN MSD-8570, MSD-8545, and MSD-8546. MSD molds their most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking...

Spark plug style terminals are used on the cap for tight connections that will not vibrate loose. The MSD Cap-A-Dapt adapts a large, Ford style cap onto your MSD distributor. This large cap spaces the spark plug terminals farther apart which lessens the...

Replacement Rotor - Fits MSD-8445 MSD Distributor Rotors are molded form high quality, voltage insulating material to resist carbon tracking while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage carrying...

Replacement cap and rotor for GM HEI The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set.

Red, stock GM HEI distributor cap. Features:• Stock GM HEI replacement distributor capClick here to download the MSD-8411 GM HEI Distributor Cap instructions.

For Chevrolet HEI Style distributors. Features:• For HEI DistributorsClick here to download the MSD-8410 GM HEI Rotor instructions.

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. Features: • Fits stock distributor

Bolt-on performance with increased output for your Mitsubishi/Neon/Talon/Mini MSD offers these two 4-tower coils as replacements for a variety of years ranging from 1994-2003 on vehicles including Mitsubishis, Neons and oth­ers. Note: Some OE coils...

For use with an MSD Blaster Coil when connected to a stock points ignition system. The ballast is not necessary if an MSD 6 or 7-series Ignition Control is being used with the points distributor. Features:• Use with older points style ignitions

Not only do separators have to keep spark plug wires away from engine heat sources, they also have to keep the plug wires far enough apart to prevent inductive crossfire and actual spark loss. Features:• No tools needed• Stand alone or can be...

16 in. Drag 18-Hole Polished Ultra Lite DBL Ring • Wheel Diameter: 16 in.• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished Ring• Wheel Construction: Forged 1-Piece• Beadloc Included:...

16 in. Drag 18-Hole Black Ultra Lite DBL Ring • Wheel Diameter: 16 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black Ring• Wheel Construction: Forged 1-Piece• Beadloc Included: Yes• Made in...

Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). Recognizing the importance of the...

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them...

The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if...

V-Series Rear Center• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black Center• Wheel Construction: Forged• Lug Nut Seat Style: Shank• Lug Nut Shank Length: .490 in. - .550 in.• Lug Nut Shank...

V-Series Rear Center• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black Center• Wheel Construction: Forged• Lug Nut Seat Style: Shank• Lug Nut Shank Length: .490 in. - .550 in.• Lug Nut Shank...

V-Series Rear Center• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished Center• Wheel Construction: Forged• Lug Nut Seat Style: Shank• Lug Nut Shank Length: .490 in. - .550 in.• Lug Nut...

V-Series Rear Center• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished Center• Wheel Construction: Forged• Lug Nut Seat Style: Shank• Lug Nut Shank Length: .490 in. - .550 in.• Lug Nut...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 17 in.• Wheel Width: 2.25 in.• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish:...

M&M shifters come with a standard floor mount. You can upgrade to the optional tube mount bracket for 1 in. tubing. The tube mount measures .850 in. OD and is designed to slide into a piece of 1 in. OD x .065 in. W tubing (sold separately). This...

3-Speed Safe Neutral TH400 ShifterIncludes shifter, 5-ft cable, shift arm, pan bracket, neutral safety switch, CO2 cylinder, and flat floor mount. Features:• All aluminum 6061-T6 construction• All parts anodized• All stainless...

3-Speed Reverse Pattern ShifterIncludes shifter, 5-ft cable, shift arm, pan bracket, neutral safety switch, CO2 cylinder, and flat floor mount. Features:• All aluminum 6061-T6 construction• All parts anodized• All stainless fasteners•...