Our Extreme Pro Series Slim-Line Wheelie Bar Kits are designed to save weight and fabrication time over the Pro Series kits. This kit provides extra strength with a full x-brace and 1-1/4 in. OD x .065 in. wall 4130 tubing. Wheel housings come...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run. Rod ends...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run. Rod ends...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run. Rod ends...

This Pro Mod Double X kit features 85 in. in length and will accommodate up to 20 in. center to center width. Main tubes, upper tubes and main cross member are 1-1/4 in. OD x .065 in. W 4130. X braces are 1-1/4 in. OD x .049 in. W 4130. Wheel...

This Pro Mod Double X kit features 80 in. in length and will accommodate up to 20 in. center to center width. Main tubes, upper tubes and main cross member are 1-1/4 in. OD x .065 in. W 4130. X braces are 1-1/4 in. OD x .049 in. W 4130. Wheel...

The QM Extreme Pro Series Low Profile Wheelie Bar Kit is an exclusive QM design. The design makes the top and bottom wheelie bar tubes in more of a straight line with the wheelie bar wheel, which makes the wheelie bars stiffer and the result will make...

Our Pro Series Wheelie Bars are made from 1-1/4 in. OD x .065  in. wall 4130 top bars and cross tube, and 1-1/8 in. OD x .058 in. wall diagonals. They feature a full "x" design brace for the lower section. Wheel housings come jig-welded to the lower...

Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...

Our Pro Series Anti-Roll Bar Kit works great on all cars up to 1800 horsepower and up to 4000 pounds. We have used this proven design in many Pro Stock, Pro Mod and Top Sportsman cars. The 1-1/2” .188” wall 4130 shaft will reduce most...

Weld Racing has set the standard with its Magnum One-Piece front-runner wheel. The one-piece forged construction provides a lighter, stronger wheel with virtually no run-out. This wheel not only adds style and character to your ride but compliments and...

Weld Racing has set the standard with its Magnum One-Piece front-runner wheel. The one-piece forged construction provides a lighter, stronger wheel with virtually no run-out. This wheel not only adds style and character to your ride but compliments and...

The original series transducer modules provide a variety of inputs from pressure and temperature, to voltage and strain gauge readings. These transducers are designed to be used in conjunction with a V-Net transducer box (810-MB-8P) or the Pro...

The original series transducer modules provide a variety of inputs from pressure and temperature, to voltage and strain gauge readings. These transducers are designed to be used in conjunction with a V-Net transducer box (810-MB-8P) or the Pro...

Our Quarter-Max Throttle Rod makes installing your throttle linkage easy. The solid rod is threaded on both ends and comes complete with rod ends and all hardware needed to install it. Available in 18" or 24" long.

Specifications:• Material: Mild steel• Thickness: 16 GA• Hole Spacing: 1.200" (fits most Aeromotive regulators)

Quarter-Max's Strange Engineering Modular 4-Link Housing Bracket is manufactured in-house to high quality specifications with precise hole locations and smooth profiles. Features: Integrated anti-roll bar mount, lower wheelie bar mount, and lower shock...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 15 in.• Wheel Width: 3.5 in.• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished•...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 15 in.• Wheel Width: 3.5 in.• Wheel Material: Aluminum• Primary Wheel Color: Polished• Wheel Finish: Polished•...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 15 in.• Wheel Width: 3.5 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black - Machined...

The Full Throttle is WELD’s modern take on the classic Torq Thrust Style. Specifications:• Wheel Diameter: 15 in.• Wheel Width: 3.5 in.• Wheel Material: Aluminum• Primary Wheel Color: Black• Wheel Finish: Black - Machined...

The Quarter-Max Wheelie Bar Ruler Wrench is two tools combined in one. Measure the height of the wheelie bars and tighten the jam nuts with the same precise tool. Specifications:• Available sizes:15/16" & 3/4"• Style: Black anodizedSold...

  144" cable with TI-style pressure sensor connector installed. Allows easy connection from the Universal Sensor Module to Racepak remote pressure sensors.

Quarter-Max's access door eliminates the hassle of removing your trunk lid every time you refuel. It can also be used for many other applications including, but not limited to, battery access, access to enclosed NOS bottles, or easy access to...

Our dual parachute mounts will accept any brand of parachute. Features pre-welded pack mounts and is constructed of 3/8" 4130 chromoly. The dual parachute mounts are designed to deploy the 2 chutes in separate directions for reduced chance of...

Ford, Mopar or Chevy 28-31 spline Alloy axles, retainer plates,axle bearings & wheel studs Alloy axle packages are optimized for street & track useSee Strange's Hy-Tuf axles for maximum torsional strength for all out Drag Racing Alloy...

7/16 in. Oval Winged Head Quarter Turn Fastener, Steel, Silver, .500 in. Grip LengthSpecifications:• Head Type: Winged• Head Style: Oval• Diameter: 7/16 in.• Grip Length: .500 in.• Material: Steel• Finish: Silver•...

RPM & Power harness for your V300/V300SD/V500/V500SD. This harness provides the necessary connections for:• Engine RPM• Driveshaft RPM• Clutch RPM• Record Button• Power Connects to the 'RPM' port of the data logger.

V-Net Module Only, Pressure, 5 volt.This replacement V-Net module is used to monitor a variety of pressures. This is the same module as used with our analog and digital sensor/module combination assemblies. The difference here being that these modules...

V-Net Module Only, Event Marker Input, Switch Closure, 12 Volt. This module allows you to monitor a 12 volt event, such as the release of a powered button. Not for use with a contact closure switch.

This V-Net adapter module allows users to monitor 4 analog inputs from a Racepak transducer box (PN: RAC-810-MB-08P).

V-Net Module with Sensor, Pressure, 0-300 PSI. These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been pre-programmed. In other words they have not been...

Temperature, Air, 0-300°F.This V-Net module allows you to measure air temperature, 0-300°F. Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a...

Pressure, Wheelie Bar, Right, 0-5000 PSI.Wheelie bar pressure is useful when trying to determine whether or not the chassis is "unloading" when launching. Used in conjunction with the Racepak wheelie bar load cell, these sensors clearly show how hard the...

Pressure, Transmission, 0-500 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical...

  These general purpose turbine-type flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. Use of a flow meter and DataLink's math channel capabilities allows you to monitor the health of your fuel pump as well as...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and provides a .5 to 4.5 volt output signal. Each transducer...