Pressure, Brakes, 0-1500 PSI.Brake pressure is important to monitor to ensure the driver leaves with the proper amount of brake pressure. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with this...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons;...

This item will have a discounted oversize fee of $100.00 when shipped via ground delivery to the contiguous 48 United States.• Designed to fit NHRA Pro Stock cars• Made from ultra-lightweight carbon fiber• Includes 2 carbon fiber intake...

Give a classy touch and finish to the side window holes in your car with our side window bezels. Machined from billet 6061-T6 aluminum, our side window bezels feature a 4.0625 in. ID hole, and have a nice smooth radius, and are...

Our lightweight bottle mount kit can be used for either fire suppression or CO2 bottles. Kit includes 4" base cup, clamp, 4" bottle mount, and 4 screws to mount the base. Welding required.

This lightweight bottle mount kit can be used for either fire suppression or CO2 bottles. Kit includes 4-3/8" base cup, clamp, 4-3/8" 4130 bottle mount, & 4 -32 screws to mount the base. Welding required.

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-5 buttons, 2 on...

Push Pull Pin, T-Handle, 3/16 in. x 3/4 in.Specifications:• Style: T-Handle• Grip Length: 3/4 in.• Pin Diameter: 3/16 in.Sold individually.

Simpson Outlaw 8' Parachute with Pilot.

NHRA Pro Stock K&N Air Inlet Opening FlangeSpecifications:• Material: 5052 aluminum• Thickness: .050"

NHRA Pro Stock K&N Air Inlet TemplateSpecifications:• Material: 5052 aluminum• Thickness: .050"

This 2015 Dodge Dart wickerbill is water jet cut from aluminum. It is available in 3/4" and 1" length after installation.Specifications:• Body: 2015 Dodge Dart• Material: Aluminum• Available Lengths After Installation: 3/4" and 1" This...

The Hood Scoop Stand Kit provides you with a sturdy and efficient way to mount your hood scoop to your carburetors or directly to your intake manifold. The panel doublers prevent chipping or fraying over time and the winged fasteners allow for a quick...

.032" thick rear end housing gasket, 11". Made of carbon fiber

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body Style: 1969 Chevrolet Camaro - Cynergy• Available Materials: Aluminum & stainless steelThis item...

Y-Block, One -8 AN Port & Three -6 AN Ports with Mounting HolesJoin or split fuel lines for a neat installation with minimal flow loss.Specifications:• Size: One -8 AN port• Size: Three -6 AN ports with mounting holes• Style:...

Y-Block, One -8 AN Port & Two -6 AN PortsJoin or split fuel lines for a neat installation with minimal flow loss.Specifications:• Size: One -8 AN port• Size: Two -6 AN ports• Style: Y-Block• Color: Blue

XAM-8T-2, Male Rod End, High Strength Alloy - Heavy Duty Shank Body - Alloy steel, heat treated, protective coated for corrosion resistance.Race - Carbon steel, protective coated for corrosion resistanceBall - Alloy steel, heat treated, hard chrome...

Thickness .090" Made of 4130

This laser cut bracket is used to mount wishbone to the housing must be bent in the desired area.

Wishbone mount   Material 0.125" 4130.

This wishbone housing mount kit typically welds to the bottom of the rear end housing to mount the wishbone slide tube rod end. Features high misalignment bushing design. Installed on every Pro Housing built at RJ Race Cars.

Clean up your wires and hoses using our convenient value pack of black wire ties. Sold in packs of 100.

Our adjustable wing struts have 13 height adjustment settings and come with a hitch pin. Available in 2 different lengths:• Long with a minimum length of 11-1/8" and a maximum of 18"• Short with a minimum length of 9-3/8" and a maximum of 16"...

Easily mount your wing struts to curved surfaces, such as a bumper, using this mount. One attached mounting bracket allows for attachment of wing struts using clevises.Specifications:• Material: Mild steel

This bracket attaches to the spill plate to prevent spill plate movement at high speeds. Other components required to complete spill plate support system.Specifications:• Available Materials: Mild steel and titanium

This kit contains qty-150 100° countersunk 8-32 x 1/2" screws and nuts used to attach the windows to the body. 100° countersink in the windows required.

Window Net Strap Bracket• Style: 4 hole• 4 hole style fits Stroud #505RJGA• Size: 11.125" x .750" x .050"• Hole Size: .250"• Material: 4130  This bracket is from the Pro Series Window Net Mount Kit #211102-1.

Our window net mount kit comes complete with tubing, quick release clip, chassis tabs, bolts, nuts and hardware. Use on the 505 window net. (Sold separately)Welding required.

Use this Window Mount Bracket to mount your window directly under the body.Specifications:• Material: Mild steel• Size: 48 in. long x 1/2 in. wide (edge to hole center)Features:• Qty 16 - evenly spaced .130 in. holes for window screws...

These aircraft quality latches release easily from inside and outside the car. Our window latches are typically installed in the top leading edge of the side door windows to keep the top of door/window from pulling away from the body at...

Specifications:• Material: 6061-T6 aluminum• Thickness: .090"

Aircraft quality latch, easy release from inside or outside the car.Specifications:• Style: RJ logoSold individually.

Our window frame kit can be adapted to any style car. The top window tubes are straight and can be bent to fit your application.Kit includes tubing, triangle brackets, window tabs, and hardware. Welding and bending required.Specifications:•...

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel...

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel...

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel...

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel...

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel...