The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and provides a .5 to 4.5 volt output signal. Each transducer...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and provides a .5 to 4.5 volt output signal. Each transducer...

This replacement connector can repair a damaged cable, V-Net module or sensor that connects to Racepak's Molex 2-pin connectors. Includes both male and female connectors, extra pins and sockets and heatshrink.

  144" cable with Molex connector installed. Allows easy connection from the Universal Sensor Module to the following sensors:• RPM sensors• Shock travel• Ride height• Infra-red temperature• 0-5 volt

Racepak Module TD2 Block Off Plate.Limited quantities remaining. Discontinued item from Holley.All clearance item sales are final. Non-returnable.

When using the Pro Analog Transducer Box II these plug-in style transducers and signal conditioning modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Used to measure pressure...

This exposed tip Type-K thermocouple reacts quickly to changing temperatures in manifold plenum. Must be used with the appropriate thermocouple amplifier module. Probes measures 12” in length and features a...

Nut and ferrule for 1/4" EGT probes.

The IQ3 dash represents an entirely new concept in data logging dashes. By placing the 32 channel data logger, Micro SD memory card, GPS board and 3 axis G meter inside the dash, every feature of the data system is now located in one central location...

The IQ3 Display Dash can be utilized with any of Racepak's V-Net data loggers, providing a compact, fully programmable LCD digital dash for use in a variety of motorsports. Progressive shift lights, eight warning lights and all inputs are easily...

Make mounting your Racepak IQ3 dash panel an ease with this panel made of 18 gauge CR mild steel.

Mount your Racepak IQ3 dash with ease by using this sleek, trim to fit, vacuum formed plastic styled carbon fiber finish mount panel.

This sleek mounting bracket for your IQ3 dash allows for easy custom mounting within your gauge cluster area. CNC-machined, black anodized mounting bracket. Pre-drilled for corresponding IQ3 mounting stud and pattern.

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique component of the V-series recorders. These black 7-pin...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique component of the V-series recorders. These black 7-pin...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique component of the V-series recorders. These black 7-pin...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique component of the V-series recorders. These black 7-pin...

144" cable with temperature connector installed. Allows easy connection from the Universal Sensor Module to Racepak fluid temp sensors (PN: RAC-810-TR-300).

Tee cables allow the user to "branch off" the main V-Net cable, to access V-Net sensors and modules that are out of reach of the main V-Net cable.V-Net modules and Interface modules, although similar in construction and appearance, are very...

This thermocouple-type sensor monitors the temperature of the metal, not the coolant. The ring-style probe has a 12" long cable that is terminated with a two pin male miniature connector.

Temperature, Cylinder Head, Left, 0-600°F.This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. For a function to be monitored on the V-Net the signal from that function must pass through...

V-Net Module with Sensor, Pressure, 0-150 PSI These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been pre-programmed. In other words they have not been...

This replacement connector can repair a damaged cable, V-Net module or sensor that connects to our Molex 3-pin connectors. Includes both male and female connectors, extra pins and sockets and heatshrink.

Use this magnet inside of the split collars.   Each magnet measures .25" OD x .25" in length.

This V-Net module and sensor allow units with a clutch RPM pickup on the harness to add clutch (input shaft) RPM monitoring to determine both clutch slip and transmission slip. Comes with zero-crossing RPM sensor, magnet and V-Net module. For a function...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. V-Net cables use a 5-pin...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. V-Net cables use a 5-pin...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. V-Net cables use a 5-pin...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. V-Net cables use a 5-pin...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. V-Net cables use a 5-pin...

This 6' serial programming cable features a 9-pin serial connector on one end and 5-pin mating connector for the UDX dash.

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

  USB Adapter, Serial to USB Port. This adapter allows you to connect virtually any Racepak serial programming cable to a modern PC or laptop. It features a 9-pin serial connector on one end, and USB on the other. Works with the...

Pressure, Manifold Boost, 0-75 PSI.Boost pressure sensors are crucial to monitoring the performance of your race engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with this information. For a...

This sensor is commonly used to measure the temperature of fluids such as water or engine and transmission oil where the temperature does not exceed 300°F.

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be interchanged with the other. Interface cables use a...

For extending Analog and Interface Module connections on V300SD, V500SD and G2X Pro data loggers.V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important...

8 Magnet Split Collar, 2.187" ID. Racepak's 8-magnet collars are perfect for automatic-equipped vehicles. These collars assist in picking up driveshaft RPM sooner than a conventional 2-magnet collar.

8 Magnet Split Collar, 2.125" ID. Racepak's 8-magnet collars are perfect for automatic-equipped vehicles. These collars assist in picking up driveshaft RPM sooner than a conventional 2-magnet collar.

8 Magnet Split Collar, 1.875" ID. Racepak's 8-magnet collars are perfect for automatic-equipped vehicles. These collars assist in picking up driveshaft RPM sooner than a conventional 2-magnet collar.