This item ships by truck freight only. Please call 309-343-7575 to order.Chromoly chassis for 10.5 Outlaw Cars. 25.2C certifiable. Includes brackets & funny car cage.SFI SPECIFICATION 25.2CFull Bodied Car Tube Chassis Roll Cage6.00 to 7.49 Seconds,...

Great for quick, accurate checks of chassis height. Push it under the car, raise the tape with the knob, pull it out, and read the height. Range is 2" - 8", accurate to 1/16". This chassis height measuring tool is quick, accurate, easy to use.

Thickness .090" Made of 4130

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Quarter-Max's ladder bar brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. Specifications:• Thickness: 1/4"• Material: Mild steel• Application: Round tube back-half During...

Weld this channel tab to the roll cage to provide a positive pivoting point for your chute handle or air chute release cylinder.

This ceramic front wheel bearing kit reduces drag on your front wheels. These roller bearings feature ceramic ball bearing for the ultimate in light weight and reducing drag at the same time. The kit comes with (qty-2) inner wheel bearings, (qty-2)...

Weld this bracket to the top and bottom of the center X brace of the chassis baseframe to add strength and prevent the welds from cracking. Made of .050" 4130.

These 3/8”-24 grade 8 bolts have been machined to the correct length for the RJ Wheelie Bar Wheel Housings, and feature a center-point on the head of the bolt to provide an eye-appealing and accurate measuring point to the center of the wheel...

This gauge panel, also known as a dash panel, is water jet cut from aluminum with mounting holes for 5 Racepak gauges and a mini Pro-Lite warning light. Requires a panel support or similar bracket welded behind for support.Specifications:• Body...

This gauge panel, also known as a dash panel, is water jet cut from aluminum with mounting holes for 4 gauges, a large diameter tach, and a mini Pro-Lite warning light. Requires a panel support or similar bracket welded behind for support...

Panel supports give your panel a solid mounting base.Specifications:• Body Style: Chevrolet Cavalier/Dodge Neon• Material: 4130

This gauge panel, also known as a dash panel, is water jet cut from aluminum with mounting holes for 4 gauges, a large diameter tach, and a mini Pro-Lite warning light. Requires a panel support or similar bracket welded behind for support...

Panel supports give your panel a solid mounting base. This panel support mounts RJ-410260-1.Specifications:• Body Style: Chevrolet Cavalier/Dodge Neon• Material: 4130

Designed for the Holley 4500 dominator series carburetors. The ring fits on top of the flange of the carburetor and has a seal lip on top of the ring to fit isolator trays or air cleaners. Our carburetor spacer rings are a perfect solution if you are...

Specifications:• Material: Steel• Finish: Plated

Specifications:• Material: Steel• Finish: Plated

Fire retardent material used to cover interior parts of the car including seats, padding, panels etc.   Color: Black   Price Per Linear Yard

RJRC’s custom carbon fiber wraparound seat was designed with a kick out to wrap around the funny car cage and give your interior a more finished look. Specifications:• Material: Available in carbon fiber and lightweight carbon fiber...

This carbon fiber wing fits a 1983-1993 Ford Mustang steel body. This wing includes spill plates, a wickerbill, and hardware. Specifications:• Body: 1983-1993 Ford Mustang• Material: Carbon Fiber• Dimensions: 56" x 14-1/2"Wing support...

This carbon fiber wing fits a 1967-1968 Chevrolet Camaro steel body. This wing includes spill plates, a wickerbill, and hardware. Specifications:• Body: 1967-1968 Chevrolet Camaro• Material: Carbon Fiber• Dimensions: 58-1/2" x...

This carbon fiber wing fits a 1969 Chevrolet Camaro steel body. This wing includes spill plates, a wickerbill, and hardware. Specifications:• Body: 1969 Chevrolet Camaro• Material: Carbon Fiber• Dimensions: 60-1/4" x 14-1/2"Wing...

Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs are constructed of carbon fiber and reinforced with carbon fiber...

Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs are constructed of carbon fiber and reinforced with carbon fiber...

Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs are constructed of carbon fiber and reinforced with carbon fiber...

This item ships truck freight only. Please call 309-343-7575 to order.Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs...

Our Carbon Fiber One-Piece Trunk Floors are pre-formed to fit certain body styles, and make finishing the trunk of your car quick and easy.  Save time and effort of fabricating custom aluminum pieces just trim to fit. Call for...

Mount this Carbon Fiber Storage/Glove Box inside your car to give you a secured location for small tools, flashlights, glasses, wheeliebar chalk, etc.

  Our carbon fiber flat sheets are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber flat sheets are constructed of carbon fiber and reinforced with carbon...

ApplicationStrange Front Carbon Brake Kits With Single Piston Calipers SpecificationsNew – .460″Discard – .200″ ContaminationMaterial is easily contaminated by fluidsKeep sprays away from pads and rotorsOnce affected, rotors &...

Our tube adapters are CNC manufactured in-house to high quality specifications.Glue this tube adapter into our carbon fiber tube to create a custom carbon fiber threaded rod that can be used for wing struts, window rods, etc. We recommend...

Use carbon fiber tube protectors anywhere on the chassis to enhance the look of your car and protect the chassis finish.Specifications:• Material: Carbon fiber• Fits: 1-5/8" - 2" tube• Length: 59"• Color: BlackSold each.This item will...

Use carbon fiber tube protectors anywhere on the chassis to enhance the look of your car and protect the chassis finish.Specifications:• Material: Carbon fiber• Fits: 1-1/4" - 1-1/2" tube• Length: 59"• Color: BlackSold each.This item...

Glue our LH and RH tube adapters #RJ-420540 & RJ-420541 into this carbon fiber tube to create a custom carbon fiber threaded rod that can be used for wing struts, window rods, etc. We recommend roughing up both the inside of the tube and the...

Keep this kit handy to make those necessary track side repairs. This kit allows you to make small, or even large repairs to fiberglass or carbon fiber blemishes. Includes everything needed to make a repairs plus carbon fiber cloth.

Made of carbon fiber.  Molded to fit in a Mach 5 Low Back Hoodscoop with Dominator carburetors on a 9.800" center-to-center hole spacing.  

This dragster style seat is constructed of carbon fiber. Dimensions:- Height: 29-1/2"- Width: 17-1/2"- Depth: 13"This item will have a discounted oversize fee of $100.00 when shipped via ground delivery to the contiguous 48 United States.

Our standard carbon seats were molded from our traditional Pro Stock aluminum seats. Use our Seat Mount Kit (part#211704) to mount it directly to your chassis.This item will have a discounted oversize fee of $100.00 when shipped via ground delivery to...

This universal carbon fiber isolator pan is molded to fit Dominator carburetors with a 9.800" center-to-center hole spacing.  Trim to fit any hoodscoop.