Description
This roll switch is typically mounted behind the clutch pedal and is commonly used to activate an ignition two step RPM switch, delay timer, or nitrous system accessories. Features a 9’ long four wire harness and adjustable swing arm with rolling wheel. Loosen the screw in the arm to adjust arm position. To make installation easier purchase one of our clutch switch mount kits.
Wiring installation notes:
Black wire - battery or switched power in
White wire - power out when switch is pressed (normally open)
Red wire - power out when switch is relaxed (normally closed)
Yellow wire - ground (typically not used)
4 Reviews
-
Great Quality
I appreciate the great quality and same day shipping.
-
Clutch Switch
After looking at lots of switches, this was by far the best configuration. Yes, it costs a few bucks, but the flexibility in setup allows me to run the two step module the way I want to. The switch is very high quality. I checked the switch electrical response with an ohmmeter, and the action is great. In this case, you get what you pay for.
-
Works like it was designed
It took some fabrication in setting it up with brackets but time was not an issue and it will work fine off of the OEM Ford Mustang Clutch pedal assembly.
-
Works like it was designed
It took some fabrication in setting it up with brackets but time was not an issue and it will work fine off of the OEM Ford Mustang Clutch pedal assembly.
Related Products
Related Products
Clutch Switch Mount
Quarter-Max
