Rear End Housings & Components
-
Quarter-Max Rear End Housing Back Brace
Quarter-Max
$95.98 - $149.98Give your Quarter-Max housing the extra support it needs with a back brace. This brace is laser cut and CNC bent to fit the 45" Quarter-Max housings (some notching during installation may be required for an exact fit). This back brace kit...RJ-304105 | RJ-304106$95.98 - $149.98 -
Quarter-Max 9 in. Ford Fabricated Housing Kit, Mild Steel, 45 in. Wide
Quarter-Max
$300.99Fabricate your own 9 in. Ford housing with our Quarter-Max fabricated housing kit. Kit includes a Quarter-Max 9 in. Ford housing face plate, banjo, inside bulkhead support, 45 in. or 60 in. short and long axle tubes, fill cap and bung, drain plug and...RJ-304107-45$300.99 -
Wishbone Rear End Housing Mount Kit
Quarter-Max
$51.99This wishbone housing mount kit typically welds to the top or bottom of the rear end housing to mount the wishbone slide tube rod end. Mount features a caged bracket design and a 1/2" NAS bolt for extra strength. Features high misalignment bushing design...RJ-201200-2$51.99 -
Quarter-Max 9 in. Ford Fabricated Bare Housing, Mild Steel, 45 in. Wide
Quarter-Max
$624.99Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...RJ-304104$624.99 -
Aluminum Cap & Steel Bung
Quarter-Max
$19.99Aluminum Cap & Steel BungSpecifications:• Cap Material: Aluminum• Bung Material: Steel• Bung OD: 1-5/8 in.• Bung Step OD: 1.475 in.RJ-219301$19.99 -
Late Big Ford Housing Ends
Strange Engineering
$140.00DescriptionStrange Housing EndsSold as pair RequiresO-ring style ball bearings or Outer seal unit bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish•...STR-H1137$140.00 -
Muffler Vent
Quarter-Max
$7.49Bronze/Steel Breather Filter Vent 1/8" NPT Male, 7/16" Length, 7/16" Hex Size.RJ-219101-1$7.49 -
Rear End Housing Faceplate Press-In Stud, 3/8"-24 Thread x 1-3/4" Long
Quarter-Max
$2.49Press-in this housing faceplate stud into the 3rd member mounting flange on 8" and 9" Ford housings for mounting the 3rd member to the rear end housing. Specifications:• Thread: 3/8"-24• Overall length: 1-3/4"RJ-600048$2.49 -
Rear End Housing Faceplate Screw-In Stud Kit
Quarter-Max
$56.99Housing Stud Kit includes Quarter-Max housing screw-in face studs, Nylok nut 3/8"-24 grade 8, AN washer 3/8", and 3/8" Hex full nut.RJ-204201$56.99 -
Quarter-Max 9 in. Ford Fabricated Bare Housing, Mild Steel, 60 in. Wide
Quarter-Max
$666.99Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...RJ-304104-1$666.99 -
Early Big Ford Housing Ends
Strange Engineering
$140.00DescriptionStrange Housing Ends RequiresO-ring style ball bearings or Outer seal unit bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed &...STR-H1135$140.00 -
Pinion Center Line Gauge
Quarter-Max
$56.99This tool is designed to help you find the exact pinion center line of your rear end housing. Use this tool when you install your brackets on your rear end housing or install your housing ends. It bolts to the face of your rear end housing and has a slot...RJ-304000$56.99 -
Rear End Housing Wishbone Mount
Quarter-Max
$8.99This laser cut bracket is used to mount wishbone to the housing must be bent in the desired area.RJ-410071$8.99 -
Wishbone Rear End Housing Mount Kit, Lower
Quarter-Max
$45.99 - $61.99This wishbone housing mount kit typically welds to the bottom of the rear end housing to mount the wishbone slide tube rod end. Features high misalignment bushing design. Installed on every Pro Housing built at RJ Race Cars.RJ-201200 | RJ-201200-1$45.99 - $61.99 -
Rear End Housing Faceplate Press-In Stud Kit
Quarter-Max
$34.99Housing Stud Kit includes Quarter-Max housing press-in face studs, Nylok nut 3/8"-24 grade 8, and 3/8" AN washer.RJ-204202$34.99 -
Aluminum Black Cap & Steel Bung
Quarter-Max
$77.99Aluminum Black Cap with Steel Bung with o-ring seal. Most commonly used on rear end housings.Steel bung with internal threads.Specifications:• Cap Material: Aluminum• Cap Color: Black• Cap Style: Plain• Bung Material: Steel• Bung...RJ-219304-1$77.99 -
Pro Series 9 in. Ford Fabricated Housing Kit, 4130, 45 in. Wide
Quarter-Max
$709.99Fabricate your own Pro Series 9 in. Ford housing with our fabricated housing kit. Kit includes 9 in. Ford housing face plate, banjo, inside bulkhead supports, 45 in. short and long axle tubes, RJ fill cap and bung, drain plug and bung, wishbone...RJ-204104-45$709.99 -
9" Ford Rear End Housing Gasket, Steel
Quarter-Max
$23.999" Ford rear end housing gasket with 1/32" thick steel core and a nonstick coating.RJ-204105$23.99 -
5# Pop-off Vent
Quarter-Max
$7.495# Pressure-Relief Vent 1/8" Ptf Male, 1/2" Overall Height, 1 To 5 PsiRJ-219101$7.49 -
Symmetrical Housing Ends, 3.150" O.D.
Strange Engineering
$150.00DescriptionStrange Symmetrical Housing Ends - For 3.150" OD BearingSold as pair Requires O-Ring Style Axle Bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide...STR-H1131$150.00 -
Aluminum Black Cap with RJ Logo & Steel Bung
Quarter-Max
$77.99Aluminum Black Cap with Steel Bung with o-ring seal. Most commonly used on rear end housings.Black cap features our RJ Race Cars logo. Steel bung with internal threads.Specifications:• Cap Material: Aluminum• Cap Color: Black• Cap Style:...RJ-219304$77.99 -
Mark Williams Aluminum Black Cap & Steel Bung
Mark Williams
$52.99Aluminum Fuel Tank Filler Cap. Anodized aluminum black fuel cap with laser engraving. Knurled grip surface with sealing o-ring included. Steel Fuel Tank Weld Bung. Welds to steel tanks and accepts the aluminum fuel cap. Also used for a large rear filler...RJ-219302$52.99 -
3" Spring Perch
Quarter-Max
$11.99Welds to 3" diameter rear end housing and works with most leaf springs. Sold each.RJ-300042$11.99 -
Shock Sensor Bracket
Quarter-Max
$15.99Weld this bracket to your rear end housing to mount your shock sensor.Specifications:• Material: SteelRJ-410113$15.99 -
9" Ford Rear End Housing Gasket, Aluminum
Quarter-Max
$25.99Our 9" Ford rear end housing gasket consists of a rubber coated .032 aluminum core.RJ-204106$25.99 -
Symmetrical Big Bore Housing Ends, 3.350" O.D.
Strange Engineering
$190.00DescriptionStrange Housing EndsSold as pair Requires Special Axle Bearings Features• 4130 billet chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by...STR-H1136$190.00 -
Aluminum Cap & Aluminum Bung
Quarter-Max
$24.99Aluminum Cap & Aluminum BungSpecifications:• Cap Material: Aluminum• Bung Material: Aluminum• Bung OD: 1.7000 in.• Bung Step OD: 1.469 in.RJ-219301-1$24.99 -
$10.99
-
Quarter-Max 9 in. Ford Fabricated Bare Housing, 4130, 45 in. Wide
Quarter-Max
$908.99Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...RJ-304104-2$908.99 -
Quarter-Max 9 in. Ford Fabricated Housing Kit, 4130, 60 in. Wide
Quarter-Max
$489.99Fabricate your own 9 in. Ford housing with our Quarter-Max fabricated housing kit. Kit includes a Quarter-Max 9 in. Ford housing face plate, banjo, inside bulkhead support, 45 in. or 60 in. short and long axle tubes, fill cap and bung, drain plug and...RJ-304108-60$489.99 -
Rear End Narrowing Kit
$699.99Narrow any rear end for racing or rodding applications with this precision-made kit. A 1-1/2 in. x 72 in. lineup bar is passed through the trimmed rear-end housing and the inner bearing blocks. Assuring accurate, true and square reinstallation of the...RJ-204107$699.99 -
Spindle Nut Wrench for 4-3/4" & 5" Floater Kits
Strange Engineering
$65.00Spindle Nut Wrench for 4-3/4" & 5" Floater KitsSTR-F2058W$65.00 -
Mopar Housing Ends
Strange Engineering
$140.00DescriptionStrange Housing EndsSold as pair Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by Strange• Material forged in the USA...STR-H1133$140.00 -
Quarter-Max 9 in. Ford Fabricated Bare Housing, 4130, 60 in. Wide
Quarter-Max
$960.99Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...RJ-304104-3$960.99 -
Quarter-Max 9 in. Ford Fabricated Housing Kit, 4130, 45 in. Wide
Quarter-Max
$436.99Fabricate your own 9 in. Ford housing with our Quarter-Max fabricated housing kit. Kit includes a Quarter-Max 9 in. Ford housing face plate, banjo, inside bulkhead support, 45 in. or 60 in. short and long axle tubes, fill cap and bung, drain plug and...RJ-304108-45$436.99 -
Rear End Housing Vent Baffle
Quarter-Max
$14.99This vent baffle prevents oil from splashing on the housing vent, while still allowing air to flow to the vent.RJC-0246$14.99 -
11" Rear End Housing Gasket
Quarter-Max
$49.99.032" thick rear end housing gasket, 11". Made of carbon fiberRJ-204108$49.99 -
$15.99
-
$255.99
-
Aluminum Black Cap with RJ Logo & Aluminum Bung
Quarter-Max
$77.99Aluminum Black Cap with RJ Logo with Aluminum Bung with o-ring seal. Most commonly used for aluminum fuel tanks.Black cap features our RJ Race Cars logo. Aluminum bung with internal threads.Specifications:• Cap Material: Aluminum• Cap Color:...RJ-219311$77.99