Modules

Temperature, Air, 0-300°F.This V-Net module allows you to measure air temperature, 0-300°F. Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a...

Pressure, Brakes, 0-1500 PSI.Brake pressure is important to monitor to ensure the driver leaves with the proper amount of brake pressure. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with this...

This V-Net module and sensor allow units with a clutch RPM pickup on the harness to add clutch (input shaft) RPM monitoring to determine both clutch slip and transmission slip. Comes with zero-crossing RPM sensor, magnet and V-Net module. For a function...

Temperature, Cylinder Head, Left, 0-600°F.This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. For a function to be monitored on the V-Net the signal from that function must pass through...

Temperature, Cylinder Head, Right, 0-600°F.This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. For a function to be monitored on the V-Net the signal from that function must pass through...

Pressure, Fuel, Carburetor, 0-15 PSI.Monitoring your regulated (carburetor) fuel pressure is important to ensure your normally-aspirated motor is receiving the right amount of fuel. These V-Net pressure sensors and modules plug in to your V-Net...

Pressure, Fuel, Nozzle, 0-300 PSI.On a supercharged application, it's important to monitor your fuel pressure after the barrel valve. These nozzle pressure modules and sensors allow you to do just that. These V-Net pressure sensors and modules plug...

Pressure, Fuel, Pump, 0-150 PSI.Monitoring fuel pump pressure is the best way to keep stay on top of your fuel system, and will alert you if you have a problem with your fuel delivery system. These V-Net pressure sensors and modules plug in to your V-Net...

Pressure, Fuel, Pump, 0-300 PSI.Monitoring fuel pump pressure is the best way to keep stay on top of your fuel system, and will alert you if you have a problem with your fuel delivery system. These V-Net pressure sensors and modules plug in to your V-Net...

Pressure, Fuel, Pump, 0-75 PSI.Monitoring fuel pump pressure is the best way to keep stay on top of your fuel system, and will alert you if you have a problem with your fuel delivery system. These V-Net pressure sensors and modules plug in to your V-Net...

Pressure, Manifold Boost, 0-75 PSI.Boost pressure sensors are crucial to monitoring the performance of your race engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with this information. For a...

Pressure/Vacuum, Manifold, 30 PSI, 0-30" HG.Vacuum sensors are crucial to monitoring the integrity of the ring seal of the cylinders of your race engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a...

Pressure, Nitrous Bottle #1, 0-1500 PSI.Nitrous bottle pressure is important for nitrous systems to ensure consistent deliver of nitrous oxide to the engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a...

Pressure, Nitrous Bottle #2, 0-1500 PSI.Nitrous bottle pressure is important for nitrous systems to ensure consistent deliver of nitrous oxide to the engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a...

Pressure, Nitrous Fuel #1, 0-15 PSI.Monitoring your nitrous fuel pressure allows you to ensure that each stage is functioning correctly. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a function to be monitored on the...

Pressure, Nitrous Fuel #2, 0-15 PSI.Monitoring your nitrous fuel pressure allows you to ensure that each stage is functioning correctly. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a function to be monitored on the...

Pressure, Oil, 0-150 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical information on...

Pressure, Oil, 0-300 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical information on...

Temperature, Oil, 0-300°F.Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the...

Vacuum, Pan, 0-30" HG.Vacuum sensors are crucial to monitoring the integrity of the ring seal of the cylinders of your race engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash. For a function to be...

V-Net Module with Sensor, Pressure, 0-150 PSI These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been pre-programmed. In other words they have not been...

V-Net Module with Sensor, Pressure, 0-300 PSI. These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been pre-programmed. In other words they have not been...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

The V-Net Ride Height module connects Racepak's Infrared Ride Height sensor to any V-series recorder. It features a wire length of 84". Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made...

This replacement V-Net module is used to monitor a variety of temperatures ranging from air and manifold temperature, to transmission or water temperature, 0-300°F. Designed for use with Racepak's resistive temperature sensor...

Temperature, Transmission Oil, 0-300°F.Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually...

Temperature, Transmission Oil, 0-600°F.This V-Net module uses a K-type thermocouple to to measure transmission fluid temperature, 0-600°F. Comes with a 36” lead. For a function to be monitored on the V-Net the signal from that...

Pressure, Transmission, 0-500 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical...

The new Universal EFI Interface Module from Racepak streams CAN-based data from aftermarket ECU systems to any Racepak data logger or dash display. This gives the ability to view and record all of the data available from the ECU. Features:• View...

Universal Sensor Module• Up to four sensors can be connected to the USM• Terminal strip design provides ability to route sensor cable from sensor to USM, cut to length and connect• Multiple USM modules may be utilized. For example, an IQ3...

V-Net Module Only, Event Marker Input, Switch Closure, 12 Volt. This module allows you to monitor a 12 volt event, such as the release of a powered button. Not for use with a contact closure switch.

These infrared sensors are used to monitor temperatures where contact cannot be made with the item being monitored. In racing, they are commonly used to monitor temperatures across the face of a tire, but they can be used for any non-contact measurement...

V-Net Module Only, Pressure, 5 volt.This replacement V-Net module is used to monitor a variety of pressures. This is the same module as used with our analog and digital sensor/module combination assemblies. The difference here being that these modules...

The Shift Light Module allows you to use any LED-style light (300 milliamp maximum) as a fully-programmable, stand-alone shift light. By accessing the engine RPM off of the V-Net you can program up to six separate shift alarm signals. Each...

This V-Net module allows users to monitor any analog sensor (travel, pressure, etc.) that utilizes 12 volt power. This analog function module has been programmed for general usage, and has not been assigned to a specific task. Use of this...

This V-Net module allows users to monitor any analog sensor (travel, pressure, etc.) that utilizes 5 volt power. This analog function module has been programmed for general usage, and has not been assigned to a specific task. Use of this...

Temperature, Water, 0-300°F.This V-Net module allows you to measure engine coolant temperature, 0-300°F. Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two...

Pressure, Wheelie Bar, Right, 0-5000 PSI.Wheelie bar pressure is useful when trying to determine whether or not the chassis is "unloading" when launching. Used in conjunction with the Racepak wheelie bar load cell, these sensors clearly show how hard the...