Quarter-Max

.125" Thick 6AL-4V Titanium This bracket is the side panel of our Pro Wheelie Bar housing part #201204-3 and part #201204-4

.090" Thick 6AL-4V Titanium

This is used for building Titanium gas pedals. Has qty 5 - ¼” holes Made from .125” thick 6AL-4V Titanium   Sold each

This ultra light weight gas pedal is made from 6AL-4V Titanium and weights just .40 of a pound !!!! It has qty - 5 ¼” holes for different ratios. Sold each

This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a...

Our dual parachute mounts will accept any brand of parachute. Features pre-welded pack mounts and is constructed of 3/8" titanium.  The dual parachute mounts are designed to deploy the 2 chutes...

These titanium lower control arms are made to fit Strange Ultra Struts only. Does not include bearings, snap rings, or rod ends. Sold in pairs.

Install this light weight titanium shifter tower to your Lenco transmission. Comes complete with three push button and an air dump switch prevision. Also comes with a quick release pull pin for easy...

Lighten up your car with these super lightweight titanium front end forks & stoppers. Includes:• Qty 2 - 6AL-4V titanium forks• Qty 2 - Adjustable stops• Hardware Sold in a pair.

Lighten up your car with this super lightweight Titanium Front End Fork Mount Kit. Features 4130 chassis fork mounts and 6AL-4V titanium forks and stoppers. Includes hardware.Sold in a pair.

.125" thick Titanium Plate. This bracket belongs to the titanium front end fork kit Part #219608 Front fork brackets sold each.

This pad is used for making lightweight Titanium brake or clutch pedals made from .090” 6AL-4V Titanium Sold each

This is the same dimensions as our RJ410041 made from  6AL-4V  Titanium with a .375” hole. .125" Thick    Sold each  

Driveshaft Tunnel Kit, Unwelded Cover, 18 in., TitaniumIn the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or...

Slot Clevis, Fits 1 in. OD x .070 in. W Tube, .250 in. Slot, .375 in. Hole, TitaniumDesigned to mount titanium driveshaft loops.Specifications:• Fits tube: 1 in. OD x .070 in. W• Slot size:...

Mount to firewall and use for power supply for your timing light.

This bearing fits all of our throwout bearing collars.

This is designed bolt directly to a manifold bolt and it tall enough so the spring will reach the carburetor. Works great on single 4 barrel applications. (Spring sold separately) Sold Each   ...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 1/4-28• Size: 3/8 in. OD x .049 in. W tube•...

This 3/8" hole bracket allows for easy attachment of your return spring. The spring is part #214107.

Prevent broken throttle linkage and stuck open throttles by limiting your pedal movement with our throttle pedal stop kit. This kit welds to the chassis or steering column. Welding required.

This floor mounted gas pedal is widely use in blower applatcions but can also be used in any applications that uses a throttle cable. It is constructed out of 4130 tubing and has Non-Skid wire mesh...

Throttle pedal pad  Material 0.060" 4130

The ratio of our state-of-the-art throttle pedal kit gives you a smooth pedal feel. The kit includes mounting tubes, all hardware, and the pedal! Features the Max Grip Pedal Pad.

Throttle Pedal Bracket• Material: Steel• Hole sizes: 1/4"

The gauge panel is also known as a dash panel.Specifications:• Material: Aluminum• Hole Sizes: 2-5/8"• Style: 3 holes

Made from 7/8" .210 tube. Utilizes ½"-20 threads. Comes with bolts and rod end misalignment spacers.

3/16" Hole.160 Slot 10/32" Thread

1/4"-20 x 1/2" thread3/16" Hole

Threaded shock mount for use with Pro Series 4-Link kits.

Push Pull Pin, T-Handle,  3/8 in. x 1 in.Specifications:• Style: T-Handle• Grip Length: 1 in.• Pin Diameter: 3/8 in.Sold individually.

Push Pull Pin, T-Handle,  1/4 in. x 1-1/2 in.Specifications:• Style: T-Handle• Grip Length: 1-1/2 in.• Pin Diameter: 1/4 in.Sold individually.

Push Pull Pin, T-Handle, 1/2 in. x 1-1/2 in.Specifications:• Style: T-Handle• Grip Length: 1-1/2 in.• Pin Diameter: 1/2 in.Sold individually.

Push Pull Pin, T-Handle, 1/2 in. x 1 in.Specifications:• Style: T-Handle• Grip Length: 1 in.• Pin Diameter: 1/2 in.Sold individually.

Push Pull Pin, T-Handle, 1/4 in. x 1 in.Specifications:• Style: T-Handle• Grip Length: 1 in.• Pin Diameter: 1/4 in.Sold individually.

Used to make overflow tanks Material .0625" 3003 Aluminum stamped with nice radiuis corner fits 4.0" O.D. tube. Sold each

Fits the overhead switch panel #214130

Our Swing Out Door Hinge Kit is designed with the correct geometry allowing the door to open away from the body. Primarily used on 63 Corvette bodies and other applications. The hinges are partially...

The quick and easy solution to installing tie down location in your trailer. This mount simply bolts to the floor of your trailer.All clearance item sales are final. Non-returnable.

This mount is designed to allow for the forward mounting hole locations of Powerglide transmissions. Use with the polyurethane mount for best results.