Quarter-Max

2015 Floorboard Camaro Carpet (Passenger Side)   See image for dimensions    

2015 Camaro Carpet (Driver's Side)   See image for dimensions.    

This 2014 Chevrolet Camaro wickerbill is water jet cut from aluminum. It is available in a 1/4" through 3/4" tall after installation.Specifications:• Body: 2014 Chevrolet Camaro• Material:...

Lug Nut Torque Extension Tool, 15/16 in. SocketTorque down the lugs on your rear drag wheels without using multiple extensions.Specifications:• Length: 20 in.• Socket Size: 15/16 in...

-3 AN Straight to 90 Degree Brake Hose. This high quality stainless steel braided fluid line has a 90 degree fitting on one end and a straight fitting on the other. Works well for brake and clutch...

Driveshaft Cover, 20 in., 4130Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a...

Mount your Meziere remote water pump directly to C&R radiator using this fitting. -20 on both ends.

-20 AN Port to 1-3/4" OD Inlet Radiator Fitting, Aluminum.Specifications:• Size: -20 AN Port• Size: 1-3/4" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

-20 AN Port to 1-1/2" OD Inlet Radiator Fitting, AluminumSpecifications:• Size: -20 AN Port• Size: 1-1/2" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

-20 AN Port to 1-1/4" OD Inlet Radiator Fitting, AluminumSpecifications:• Size: -20 AN Port• Size: 1-1/4" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

You can rest easy when you secure your car with this tie down strap. Twisted snap hook ends ensure the hook will not slip off the D-rings.   The 2" wide webbing has a recommended safe working...

Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼”. Measurements are overall length. Bearing...

This handy mount kits can be used for 10 oz CO2 bottles. Kit includes 2" base cup, clamp, and a 2" bottle mount. Welding required.

Body Mount BracketSpecifications:• Size: 2 in. x 2 in.• Material: Mild steelAlso available in titanium.Sold individually.

18 volt mount that transfers voltage from battery to the electrical device.

O2 sensor 18V battery kit. Included in kit: billet aluminum battery mount, Qty – 2 18V batteries and charger. Wire this 18V battery to your car and it will run your o2 sensors and save voltage...

Driveshaft Loop, 180 Degree, 12 in. x 6.5 in., 4130 Driveshaft loops, along with driveshaft covers, are used in the construction of driveshaft tunnels. In the event of driveline failure, most...

This 180 degree spanner wrench is specifically designed for the springs on coil over shocks. Eliminate the old hammer/screwdriver technique with this wrench. Plated.

Place these fire nozzles in interior compartment and the motor compartment. Will spray 180° when fire suppression kit is activated.

Driveshaft Tunnel Kit, Tack Welded Cover, 18 in., 4130In the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or...

Driveshaft Cover, 18 in., 4130Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a...

Carbon up your engine compartment with this carbon air cleaner lid. Fits 14" air cleaner. Note: does not include base.      

Carbon up your engine compartment with this carbon air cleaner lid. Fits 14" air cleaner. Note: does not include base. 

1-3/8" Hex Link Part #420122 3/8"-24 right hand on one end, left hand on the other. Typically used for clutch linkages and anti-roll bar links. Sold Each.

Our dropped tubular crossmember is the economical solution to add a crossmember and front ladder bar brackets to your project.Dropped Tubular Crossmember with Brackets, 1-3/4 in. OD, 3 in. Drop, Mild...

Dropped Tubular Crossmember, 1-3/4 in. OD, 3 in. Drop, Mild SteelSpecifications:• 3 in. drop center• Width: 54-1/8 in.• Material: Mild steel• Diameter: 1-3/4 in. OD• Wall...

13 LED Brake or Tail light    Brake or Tail light Bracket  # 410673

This black anodized CNC lever is used to convert a master disconnect to a "push-off" style. Fits switch #214116

Required by most sanctioning bodies, the master disconnect switch cuts off all electrical power in the car. Hardware and instructions included. Order a custom, laser cut bracket for this switch.

12"x36" DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 12" overall height • 36" overall width

Driveshaft Tunnel Kit, Tack Welded Cover, 12 in., 4130In the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or...

-3 AN to 90 Degree Stainless Steel Brake Line, 12 in. LongThis high quality stainless steel braided fluid line has a 90 degree fitting on one end and a straight fitting on the other. Works well...

Driveshaft Cover, 12 in., 4130Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a...

Parachute Cable, 12 FtReplace your old cables or build your own chute deployment system with our 12 ft Morse cables.Specifications:• Length: 12 ft

Parachute Cable, Lightweight, 12 FtReplace your old worn out cables with this new lightweight cable. Weighs 3/4 of a pound lighter than normal chute cables. This cable is a bolt in application...

Our wheel spacers are manufactured in house on our water jet machine. Holes are set up for use with 1/2" diameter drive studs. For use with 4-1/2", 4-3/4", and 5" bolt circles. Specifications:•...

Our wheel spacers are manufactured in house on our water jet machine. Holes are set up for use with 11/16" diameter drive studs. For use with 4-1/2", 4-3/4", and 5" bolt circles...

This lightweight CNC machined parachute handle offers a comfortable feel and grip. Specifications:• Thickness: 1/8 in.• Length: 8 in.• Material: 6061-T6 aluminum• Color/Finish:...

1/8" NPT to 3/8" Hose 90° Bend Air Fitting

Use this air muffler to diffuse or filter your air lines. Can also be used for gasoline or oil. Max pressure 300 psi. 1/8" NPT