Quarter-Max

Use this 4130 bracket to mount your clutch.

This roll switch is typically mounted behind the clutch pedal and is commonly used to activate an ignition two step RPM switch, delay timer, or nitrous system accessories. Features a 9’ long...

For consistent pedal travel every time, install our Clutch Stop Kit. Includes 4130 Chromoly tubing, tube adapter, and all hardware.

Material 0.060" 4130 Hole size 1.0050"

This Diamond tipped bolt screws into the clutch machine arm and cuts a straight surface on clutch discs.

Line your clutch discs up with ease, 10 spline. Black anodized.

Use this Weld on bracket to mount your clutch light.

Use  this bracket to mount your clutch light. 

Thickness 3/16" Made of Mild Steel

Operates off 110V and comes with hose and blow gun. The shaft is encased with a 3 bearing system for less flex on shaft. Flip up handle saves storage space. Built in male outlet.   CNC high...

This Zinc coated fork is CNC machined from solid 4140 steel and then offset for use with the new 3-disc clutches. The design offers three locations for the pivot. This for requires a rod end for...

.125 thick 4130

Our fabricated clutch forks are the best on the market. They are cut down for shorter throws, very quick ratios, and no flex. For a quick ratio, choose our clutch fork. If you want the fastest ratio...

This handy storage clutch disc storage rack holds Qty-9 6.25” clutch discs. Made from .250” 6061-T6 Aluminum. Has rubber feet on the bottom to keep it from sliding around. Assembly...

This handy kit contains all the washers, nuts and bolts you need to add the counterweight you want to your clutch.

110V clutch blower, Carbon fiber shroud for blower, Carbon fiber flange that will clip on to most Browell bellhousings.    6ft long hose, 3 speeds air delivery (cubic foot per...

Mount this 12 LED Light in the clutch area to service your clutch. This light can be mounted anywhere a light source is needed.   Dimensions 7-3/4" L x 3/4" H x 1" D

Material: .125" 4130

Material: .125" 4130 Fits 1.1732" tube. Hole size 0.6300"

Material: .125"  4130

Material: .125" 4130

Material: 125" 4130   Hole size 1.956"

Material: .250" 4130

These nuts are made to be pressed into those hard to reach areas at the bottom of the midplate or blocksaver. This allows for easy bolting of the bellhousing.Sold individually.

This kit has a steel clevis which is designed to screw on to a Pinto style Rack & Pinion. The clevis has 14MM x 1.5 pitch female threads. It is designed to replace the old style “ball...

Mild steel clevis .190" thick 5/8" hole at bottom (2) 1/2" hole at top.

Mild steel .190" thick 3/4" hole at bottom and (2) 1/2" holes at top.

These pliers easily install clecos in place to temporarily hold body panels or sheelmetal in place.

Clecos are a necessity for anyone that does any fiberglass or sheetmetal work. These spring loaded clamps are designed to temporarily hold two pieces together until a permanent joint can be made. For...

Clecos are a necessity for anyone that does any fiberglass or sheetmetal work. These spring loaded clamps are designed to temporarily hold two pieces together until a permanent joint can be made. For...

Clecos are a necessity for anyone that does any fiberglass or sheetmetal work. These spring loaded clamps are designed to temporarily hold two pieces together until a permanent joint can be made. For...

Clecos are a necessity for anyone that does any fiberglass or sheetmetal work. These spring loaded clamps are designed to temporarily hold two pieces together until a permanent joint can be made. For...

Our vacuum hose has the spring molded into the hose, providing a free flowing (smooth) bore that won't collapse. Additionally, use of this clear hose allows for a quick visual inspection of what is...

Anti-Roll Bar TabSpecifications:• Material: Steel• Thickness: 1/8 in.• Hole size: 3/8 in.Sold individually.

This Air Launcher Cylinder Support Ring is designed to help keep the cylinder from damaging the body/bumper during vibration and also gives it a nice finish look to holes made in the body for...

Chrysler TFX Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 9" overall height • 36" overall width

Chrysler Hemi TFX MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 3/8"• Size: 24" x 24"

Chrysler Hemi TFX MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 24" x 24"

Chrysler Hemi TFX Lightweight MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 24" x 24"

Chevy/DRCE Double Frame Rail MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Chevy/DRCE