Quarter-Max

Couplers offer direct steering connections where an angle is not required. Couplers can also be used to extend the steering shaft. Overall length is 2". OD is 1". 3/4" x 9/16-26.

Designed to seal the steering column tube through a hole in the the firewall.   The 3" O.D. aluminum flange ring mounts to the firewall with four screws and the fire...

Our Delrin bushing is custom made on CNC equipment to provide you with a precise fit for your 3/4" steering column.

This steering wheel button mount can be used to mount the line lock button 206114. Includes hardware.Specifications:• Material: Aluminum• Color: RawSold individually.

Cap your radiator with our steel radiator cap.

Our heavy duty solenoid is designed for continuous use and is able to handle the high amp loads generated with dual 16 volt battery systems common in race cars.

Quarter-Max's Pro Twist Lock Starter Cable Quick Disconnect Kit offers a unique twist lock design for quick and secure power connection. Speed up your engine removal and installation...

This thin wrench is designed to tighten the jam nuts on starter buttons and toggle switches. If you would use a standard wrench to try to tighten these jam nuts they are normally to thick to fit in...

Starter buttonMaterial 0.1825 4130   Hole size .2650"

Start button mount Material .125" 4130

Start button Bracket base Material 14 gauge mild steel.

Make wiring your standard QM switch panel a ease with this 1/8" copper jumper strip. The jumper strip ties all your switches together.

Quarter-Max's ladder bar housing brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles.This bracket is included in our ladder bar kit...

Standard duty plunger style switch.

.060 stainless steel tab with 10-32 hole

This spring attaches to the header collectors 1/2" x 3" free. Length is 3" with max length of 4.440”

Designed to fit most tube chassis cars with big block Chevy 4.840" bore spacing 5/16" stainless steel flanges 2-1/4” to 2-3/8” step primary tube size option comes...

5" Bore 2.5" Tube Size 5/16" Thick

Stainless Steel EGT Weld In Bung.

Thickness .090" Made of 4130

GM MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Clutch

This small profile, stainless steel latch can be used nearly anywhere you would want an access door that needs to be held tightly closed.Specifications:Material: Stainless steel

This window tab can also be used as a spoiler tab.Specifications:• Material: Mild steel• Thickness: .095"• Style: 2 holes

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2015 Chevrolet C7 Corvette• Material:...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2014 Dodge Dart• Material: Stainless...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2019-2023 Chevrolet Camaro - Five Star•...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2012 Chevrolet Camaro• Available Materials:...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose.Specifications:...

This aluminum tray is designed to fit the split Holley Dominator or similar carburetors. It is cut on a water jet for a precise fit. It's 2-piece design allows the pieces to overlap in the middle to...

The connection between steering column and steering box may very well be one of the most crucial. Put these rack adapters in place for a quality fit. Proper installation will provide solid...

Upgrade your wing support system with our spill plate support kit. This kit may be installed to support the rear of the spill plates. Includes all hardware.

Our t-handle spark plug tool features a 5/8" swivel head socket on a 19" long bar. The t-handle is marked for easy indexing of the electrode location. This tool allows you to get to the plugs of...

Now you can keep your spark plugs organized like a pro. Our new Spark Plug Indexing Kit gives you 20 labeled compartments for your plugs (not included) and one large compartment to store your...

Check your spark plugs with this handy tool. Illumination and magnification allows the spark plug base circle to be viewed clearly. Soft zippered storage case keeps the tool protected when not in use.

Index your spark plugs quickly and easily with our aluminum plug indexing block.

This plug organizer allows you to store 192 indexed spark plugs at one time. This is designed to work with our spark plug indexer part number #219857. It has 24 different index locations and will...

This billet stainless steel indexer is machined with numbers for marking the position of the ground electrode. The indexer is knurled for hand held use, or can be secured in a vise on the machined...