Racepak

Constructed from aluminum and black anodized for a professional appearance, the SmartWire Switch Panel is connected, via a single cable, to the Switch Panel connector located on top of the SmartWire...

Replacement magnet used in the Racepak driveshaft collars. Also used in input shafts to register clutch RPM and on wheels to determine wheel RPM. Each magnet measures .25" OD x .20" in...

The Racepak AF-1 is a single channel air/fuel sensor package designed to be utilized with any of Racepak’s Vnet (canbus) series of data loggers. Engineered for the harsh conditions of the...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

These linear travel sensors are designed to monitor even the slightest amount of shock travel or tire shake. These sensors can also be used to determine throttle or clutch position.

These linear travel sensors are designed to monitor even the slightest amount of shock travel or tire shake. These sensors can also be used to determine throttle or clutch position.

Zero Crossing TDC Sensor, 3-Pin 3/8" dia. This speed sensor is used to pick up Top Dead Center (TDC) on the front hub of the engine. It is designed specifically for use with MSD-style crank trigger...

SD / Micro SD USB Card reader. This permits the SD card to be read by a PC using the USB port rather than the SD card slot.

This single-wire sensor is commonly used to pick up fluid temperatures on the IQ3 and UDX Street Dashes and the LDX. This sensor is designed to measure the temperature of fluids such as water or...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and...

This programming cable features a 9-pin serial connector on one end, and a 3.5MM plug which connects to the following Racepak data loggers and dashes:• Sportsman• IQ3 Display• IQ3...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and...

This replacement connector can repair a damaged cable, V-Net module or sensor that connects to Racepak's Molex 2-pin connectors. Includes both male and female connectors, extra pins and sockets and...

  144" cable with Molex connector installed. Allows easy connection from the Universal Sensor Module to the following sensors:• RPM sensors• Shock travel• Ride...

When using the Pro Analog Transducer Box II these plug-in style transducers and signal conditioning modules are used to convert the input from various analog functions into signals that can be...

This exposed tip Type-K thermocouple reacts quickly to changing temperatures in manifold plenum. Must be used with the appropriate thermocouple amplifier module. Probes...

Nut and ferrule for 1/4" EGT probes.

The IQ3 dash represents an entirely new concept in data logging dashes. By placing the 32 channel data logger, Micro SD memory card, GPS board and 3 axis G meter inside the dash, every feature of the...

The IQ3 Display Dash can be utilized with any of Racepak's V-Net data loggers, providing a compact, fully programmable LCD digital dash for use in a variety of motorsports. Progressive shift lights,...

Mount your Racepak IQ3 dash with ease by using this sleek, trim to fit, vacuum formed plastic styled carbon fiber finish mount panel.

This sleek mounting bracket for your IQ3 dash allows for easy custom mounting within your gauge cluster area. CNC-machined, black anodized mounting bracket. Pre-drilled for corresponding IQ3...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

144" cable with temperature connector installed. Allows easy connection from the Universal Sensor Module to Racepak fluid temp sensors (PN: RAC-810-TR-300).

Tee cables allow the user to "branch off" the main V-Net cable, to access V-Net sensors and modules that are out of reach of the main V-Net cable.V-Net modules and Interface modules, although...

This thermocouple-type sensor monitors the temperature of the metal, not the coolant. The ring-style probe has a 12" long cable that is terminated with a two pin male miniature connector.

Temperature, Cylinder Head, Left, 0-600°F.This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. For a function to be monitored on the...

V-Net Module with Sensor, Pressure, 0-150 PSI These module and sensor combinations are the same as our V-Net Modules with Sensors, Analog (Pre-Programmed) with the exception that they have not been...

This replacement connector can repair a damaged cable, V-Net module or sensor that connects to our Molex 3-pin connectors. Includes both male and female connectors, extra pins and sockets and...

This V-Net module and sensor allow units with a clutch RPM pickup on the harness to add clutch (input shaft) RPM monitoring to determine both clutch slip and transmission slip. Comes with...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...