Racepak

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This Interface module allows users to connect shock travel sensors directly to the high speed analog port on the V300SD, V500SD and G2X Pro data loggers.Interface modules are another unique...

This speed sensor is commonly used to detect either Drive Shaft (ring gear) RPM or Front Wheel RPM. This sensor has a 3/8" fine thread pitch and is triggered using ferrous (steel) material.

Weldment and plug for Racepak Air Fuel sensors.

This 4" long braided steel line comes with 1/8 NPT male and female ends and can minimize harmful vibrations to a pressure or vacuum sensor.

This single-wire sensor is commonly used to pick up fluid temperatures on the IQ3 and UDX Street Dashes and the LDX. This sensor is designed to measure the temperature of fluids such as water or...

The Shift Light Module allows you to use any LED-style light (300 milliamp maximum) as a fully-programmable, stand-alone shift light. By accessing the engine RPM off of the V-Net you...

This 25' serial programming cable features a 9-pin serial connector on one end, with a 25-pin connector on the other, allowing users to program, download and perform telemetry sessions with their...

This replacement V-Net module is used to monitor a variety of temperatures ranging from air and manifold temperature, to transmission or water temperature, 0-300°F. Designed for use with...

This V-Net module allows users to monitor any analog sensor (travel, pressure, etc.) that utilizes 12 volt power. This analog function module has been programmed for general usage, and...

Monitoring pressure to evaluate your fuel system will only give you half of the picture. To know the exact status of how it is affecting your engine you must also know the fuel volume.  Use this...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

The small size and ruggedness of these ‘PT-type’ pressure transducers make them ideal for the measurement of pressure directly at the source. The transducer requires 5 volt DC power and...

Mounting a Racepak data logger is easy with these lightweight, billet aluminum mounting brackets. These brackets are designed to clamp firmly around a chassis tube and provide a pre-drilled and...

Universal Sensor Module• Up to four sensors can be connected to the USM• Terminal strip design provides ability to route sensor cable from sensor to USM, cut to length and connect•...

Temperature, Transmission Oil, 0-600°F.This V-Net module uses a K-type thermocouple to to measure transmission fluid temperature, 0-600°F. Comes with a 36” lead. For a...

This infrared temperature sensor is used to monitor temperatures where contact cannot be made with the item being monitored. In racing, they are commonly used to monitor temperatures across...

Thermocouple Connector, Male.

Thermocouple Connector, Female.

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine. Supercharged and turbocharged engines use EGT sensors rather than air/fuel sensors due to the volume of...

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine. Supercharged and turbocharged engines use EGT sensors rather than air/fuel sensors due to the volume of...

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine. Supercharged and turbocharged engines use EGT sensors rather than air/fuel sensors due to the volume of...

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine. Supercharged and turbocharged engines use EGT sensors rather than air/fuel sensors due to the volume of...

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine. Supercharged and turbocharged engines use EGT sensors rather than air/fuel sensors due to the volume of...

These infrared sensors are used to monitor temperatures where contact cannot be made with the item being monitored. In racing, they are commonly used to monitor temperatures across the face of a...

This replacement V-Net module is used to monitor throttle position. Designed for use with Racepak's series of travel sensors, which it connects to using a 3-pin Molex connection.

This sensor is typically used for linear measurements, such as throttle position, when the mounting angle is not critical. The sensor is calibrated to the travel of the throttle (i.e. 0% when closed...

Mount your Racepak sportsman system to your car with ease. Includes logger mounting plate, black anodized billet aluminum clamp bracket. 

Racepak's Sportsman Data Logger is designed to meet the needs of the sportsman drag racer. The Sportsman Series incorporates the same V-Net technology used by the professionals, but in an...

This connector kit provides you with the components that will allow you to repair a damaged cable or V-Net module or shorten the pigtail cable between the V-Net Module and pressure sensor.

The Racepak Switch Module provides the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the Switch Module, and switch data is...

This cable allows users to connect a Smartwire to their V-Net sensors and/or data logger. This cable allows the SmartWire unit to share information from your Racepak V-Net system to further enhance...