Racepak

Cap for 1/4" EGT bungs.

This replacement connector can repair a damaged cable, V-Net module or sensor that connects to our Molex 3-pin connectors. Includes both male and female connectors, extra pins and sockets and...

The IQ3 Display Dash can be utilized with any of Racepak's V-Net data loggers, providing a compact, fully programmable LCD digital dash for use in a variety of motorsports. Progressive shift lights,...

Air/Fuel Sensor Only (new style, for 220-VM-AF-series). Racepak has an excellent selection of A/F controllers and sensors created specifically for tuning race engines. Each of these 2 and 4 channel...

This speed sensor is commonly used to detect Drive Shaft RPM or Wheel RPM. This metal sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following Racepak...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

This driveshaft bracket allows you to fasten your Racepak driveshaft sensor to a 9" center section. Fits all 5/16" sensors and features slotted mount for easy adjustment.

Racepak's Sportsman Data Logger is designed to meet the needs of the sportsman drag racer. The Sportsman Series incorporates the same V-Net technology used by the professionals, but in an...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

This connector kit provides you with the components that will allow you to repair a damaged cable or V-Net module or shorten the pigtail cable between the V-Net Module and pressure sensor.

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

Nut and ferrule for 1/4" EGT probes.

Temperature, Water, 0-300°F.This V-Net module allows you to measure engine coolant temperature, 0-300°F. Comes with a 72” lead. For a function to be monitored on the V-Net...

The Racepak AF-1 is a single channel air/fuel sensor package designed to be utilized with any of Racepak’s Vnet (canbus) series of data loggers. Engineered for the harsh conditions of the...

This sleek mounting bracket for your IQ3 dash allows for easy custom mounting within your gauge cluster area. CNC-machined, black anodized mounting bracket. Pre-drilled for corresponding IQ3...

Mount your Racepak sportsman system to your car with ease. Includes logger mounting plate, black anodized billet aluminum clamp bracket. 

Tee cables allow the user to "branch off" the main V-Net cable, to access V-Net sensors and modules that are out of reach of the main V-Net cable.V-Net modules and Interface modules, although...

Vacuum, Pan, 0-30" HG.Vacuum sensors are crucial to monitoring the integrity of the ring seal of the cylinders of your race engine. These V-Net pressure sensors and modules plug in to...

Tee cables allow the user to "branch off" the main V-Net cable, to access V-Net sensors and modules that are out of reach of the main V-Net cable.V-Net modules and Interface modules, although...

Pressure, Oil, 0-150 PSI.Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger...

8 Magnet Split Collar, 2.187" ID. Racepak's 8-magnet collars are perfect for automatic-equipped vehicles. These collars assist in picking up driveshaft RPM sooner than a conventional...

8 Magnet Split Collar, 2.125" ID. Racepak's 8-magnet collars are perfect for automatic-equipped vehicles. These collars assist in picking up driveshaft RPM sooner than a conventional...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

Zero Crossing RPM Sensor, 3-Pin 3/8” dia. This non-powered sensor is designed for monitoring magnetic pulses. It must be used with an RPM input designed for a zero crossing sensor. This...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not...

Pressure, Nitrous Bottle #1, 0-1500 PSI.Nitrous bottle pressure is important for nitrous systems to ensure consistent deliver of nitrous oxide to the engine. These V-Net pressure sensors...

Replacement magnet used in the Racepak driveshaft collars. Also used in input shafts to register clutch RPM and on wheels to determine wheel RPM. Each magnet measures .25" OD x .20" in...

This speed sensor is commonly used to detect driveshaft RPM or wheel RPM. This plastic sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

Mounting a Racepak data logger is easy with these lightweight, billet aluminum mounting brackets. These brackets are designed to clamp firmly around a chassis tube and provide a pre-drilled and...

Temperature, Transmission Oil, 0-300°F.Comes with a 72” lead. For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor...

Pressure, Fuel, Carburetor, 0-15 PSI.Monitoring your regulated (carburetor) fuel pressure is important to ensure your normally-aspirated motor is receiving the right amount of fuel. These V-Net...

Mount your Racepak IQ3 dash with ease by using this sleek, trim to fit, vacuum formed plastic styled carbon fiber finish mount panel.

Used for measuring the load pressure on the wheelie bars during launch. Requires V-Net Module and Sensor. 5/8" shank.

The Racepak Emergency Kit (REK) contains essential spare components that any racer who depends on a Racepak system should keep handy. In the heat of battle at the track, it’s easy to misplace...

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

Weldment and plug for Racepak Air Fuel sensors.

V-Net modules and Interface modules, although similar in construction and appearance, are very different in the functions they perform. It is important that components designed for one system not be...

This programming cable features a 9-pin serial connector on one end, and a 3.5MM plug which connects to the following Racepak data loggers and dashes:• Sportsman• IQ3 Display• IQ3...