Quarter-Max

TFX Lightened MotorplateSpecifications:• Material: 6061-T6 aluminum • Thickness: 1/4"• Notch to notch: 26"• Overall width: 34" Note: This motorplate requires...

Body exhaust rings, also referred to as body exhaust flanges, provide a professional, finished look while protecting the paint & body around the side exit headers or zoomies. Includes hardware...

Press-in this housing faceplate stud into the 3rd member mounting flange on 8" and 9" Ford housings for mounting the 3rd member to the rear end housing. Specifications:• Thread: 3/8"-24•...

Faceplate for 11 in. rear end housing. For wide 4-link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RH

Faceplate for 11 in. rear end housing. For 16 in. wide Four Link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RH

Relay the amount of force applied on your wheelie bars to your Racepak with this load cell. Fill the load cell with brake fluid and install the sensor into the 1/8" NPT port. Modification of current...

This valve stem requires a 21/64 drill bit and 1/8-27 NPT tap to install. When installing, go about 3/4 of the way through with the tap so the NPT threads will tighten up properly. Use thread sealer...

Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-5/8" ID• Material: 4130• Thickness: 1/4" Also available in 1-1/2" ID.

Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-1/2" ID• Material: 4130• Thickness: 1/4" Also available in 1-5/8" ID.

Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3...

Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3...

Weld this bushing into the chassis to mount your midplate/midmount.Specifications:• I.D.: .375"• O.D.: .625"• Width: 1.3125"• Material: 4130

This kit is designed for installing front and rear lexan windows when using the factory mounting window lips on a steel body car. Select your desired rubber thickness to mount your lexan windows...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Left hand• Thread Size: 1/4-28• Size: 1/2 in. OD x .049 in. W tube•...

Quarter-Max's steering wheel extensions are the perfect solution to either move the steering wheel closer to the driver and/or to allow the driver more room when entering/exiting the car when using a...

This 2012-2017 Chevrolet Camaro adjustable wickerbill is water jet cut from aluminum. It allows for one set of holes to be drilled in the wing with 3 mounting holes in 1/8" increments on the...

This 2012-2017 Chevrolet Camaro adjustable wickerbill is water jet cut from aluminum. It allows for one set of holes to be drilled in the wing with 3 mounting holes in 1/4" increments on the...

The Quarter-Max Universal Carbon Fiber Belly Pan is 22-3/4" wide to span across even the widest of frame rail widths. Belly pan is designed to be trimmed to fit during installation between the engine...

Driveshaft Cover, 30 in., Carbon Fiber Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies...

Weld to your chassis to use for tie downs. Made from 1/2 in. OD x .058 in. wall 4130 tubingWelding required.Sold individually.

Our Heavy Duty 1-1/2” Splined Anti-Roll Bar Kit is the most universal heavy duty splined anti-roll bar kit available on the market today! Engineered to provide superior strength for high...

This vent baffle prevents oil from splashing on the housing vent, while still allowing air to flow to the vent.

Use this fabricated mount to install the battery charge receptacle to the bumper or other convenient areas of the car. The mounting flange features 4 pre-drilled holes to accept 6-32 screws...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 7/16-20 thread• Size: 3/4 in. OD x .058 in. W...

This is the plate that is used in the weld up Quarter-Max steering wheel extension kit. Features a standard 5 bolt pattern and fits over a 1-1/4" tube.Specifications:• Material: 1/8" thick...

This is the plate that is used in the weld up Quarter-Max steering wheel extension kit. Features a standard 5 bolt pattern and fits over a 1-1/4" tube.Specifications:• Material: 1/8" thick...

Quarter-Max's steering wheel extensions are the perfect solution to either move the steering wheel closer to the driver and/or to allow the driver more room when entering/exiting the car when using a...

Quarter-Max's steering wheel extensions are the perfect solution to either move the steering wheel closer to the driver and/or to allow the driver more room when entering/exiting the car when using a...

Quarter-Max's steering wheel extensions are the perfect solution to either move the steering wheel closer to the driver and/or to allow the driver more room when entering/exiting the car when using a...

This wishbone housing mount kit typically welds to the top or bottom of the rear end housing to mount the wishbone slide tube rod end. Mount features a caged bracket design and a 1/2" NAS bolt for...

Our scalloped spill plate support was designed to attach the corner of spill plates to the quarter panel with 6-32 screws.  Shape to fit any body style. Specifications: •...

Universal TabSpecifications:• Thickness: .060• Material: 4130• Hole Size: 10/32Sold each.

1/8" NPT Steel Weld-In Bung

Provides for easy installation and removal of transmissions when used with our Lenco or Liberty mount. The kit consists of four Chromoly laser cut brackets and two 4130 slide tubes.

Our carbon fiber engine pan is designed to install underneath your engine to help contain oil and debris during engine failure. Also referred to as a Oil Containment Device or OCD. Designed to fit...

This Shock Mounting Jig is made of 1/4" 6061-T6 aluminum. It has 1/2" holes with 3 mounting locations: 13-3/4", 14-3/4", and 15-3/4".Sold each.

Our CNC machined cap screws onto the outer casing of our parachute cables. This end keeps the cable from fraying and snagging on your chute pack.Sold each.

TFX Lightened MotorplateSpecifications:• Material: 6061-T6 aluminum • Thickness: 1/4"• Notch to notch: 26-1/4"• Overall width: 32" Note: This motorplate requires...

The 3/16 in. Allen Head Quarter Turn Fastener Driver is an easy grip handle tool for fastening quickly and safely.Sold individually.

The Quarter-Max Stainless Steel Screw & Nut Kit contains:• Qty-25 - 10-32 x 1/2 in. screws• Qty-25 - 10-32 x 5/8 in. screws• Qty-25 - 10-32 x 3/4 in. screws• Qty-25 - 10-32 x...