Weld this bracket to the chassis to mount your fire system nozzles.Specifications:• Material: 4130• Thickness: .050"• Hole size: 0.440"

The Power Grid Ignition Control is specially designed to mount to the MSD-7730 Power Grid System Controller Box. Specifications:• Current Draw: 1.3 Amp per 1,000 RPM• Primary Voltage: 545-570 Volts• RPM Range: 15,000 RPM with 14.4...

This mount fits the MSD-8261 HVC-2 Coil.Specifications:• Thickness: 1/8"• Material: 6061 aluminum• Size: 5.50" L x 4.25" W

The Pro Power HVC-2 Coil is designed for racing applications with an MSD 7 or 8 Series Ignition Control. Improved voltage distribution is achieved with an iron U-Core design with a segmented bobbin. The bobbin has amazing dielectric capabilities at high...

The Pro Power HVC Coil is designed for racing applications with an MSD 7 Series Ignition Control. With a combination of extremely low primary resistance and the efficient design of an E-Core coil, the HVC produces high voltage without compromising the...

The Hurst® Roll/Control® is used primarily in drag racing to provide positive locking action to the front wheels of race cars, reducing the chance of "Rolling the Lights" and producing more effective "Burn Outs" for heating up the tires. Rigorous...

3-1/2" Thick 4130

.250 thick 1018/1020 mild steel

Material 0.90" 4130

Thickness .090 Made from 4130

9" Ford rear end housing gasket with 1/32" thick steel core and a nonstick coating.

Housing Stud Kit includes Quarter-Max housing screw-in face studs, Nylok nut 3/8"-24 grade 8, AN washer 3/8", and 3/8" Hex full nut.

Housing Stud Kit includes Quarter-Max housing press-in face studs, Nylok nut 3/8"-24 grade 8, and 3/8" AN washer.

DescriptionStrange Housing EndsSold as pair Requires Special Axle Bearings Features• 4130 billet chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by...

.062" thick 4130 Width 8-1/2"  

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Thickness .090" Made of 4130

Our Hood Scoop to Carburetor Mount Kit makes mounting your hood scoop easy. Simply screw it into the air cleaner boss on your carburetor and quarter turn fasten the scoop down to it.5/16” coarse thread.Requires one kit per carburetor.

Hoodscoop Support Bracket   Material .032” 4130

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary. Fits:• QM-211904 QM F1-4 Carbon Fiber/Fiberglass Hood Scoop• QM-211904-1...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits the 211902 QM F1-2 Carbon Fiber/Fiberglass Hood Scoop and...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211901 QM F1 Carbon Fiber/Fiberglass Hood...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211911 QM Mach 5 Low Back Carbon Fiber/Fiberglass Hood Scoop•...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits:• 211912 QM Mach 5 Wide Carbon Fiber/Fiberglass Hood Scoop• 211912-1...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary.Fits: K&N-100-8517 K&N Carbon Fiber Hood Scoop.

Designed to be fully adjustable, this kit mounts to the front engine plate and mid mount. Comes with tubing, mounting plate, hitch pins, eye bolts, cap screws, and lock nuts.

This slip-on seal takes up the gap between a hood scoop and your hood. Also works for doors. Sold per foot.

This slip-on seal takes up the gap between a hood scoop and your hood. 150ft. hood scoop edging

Hood Scoop Stand Plate

These hole saws work great with our tubing notcher. It is important to have high quality hole saws when notching steel tubing, especially when you are notching 4130.

These hole saws work great with our tubing notcher. It is important to have high quality hole saws when notching steel tubing, especially when you are notching 4130.

These hole saws work great with our tubing notcher. It is important to have high quality hole saws when notching steel tubing, especially when you are notching 4130.

These hole saws work great with our tubing notcher. It is important to have high quality hole saws when notching steel tubing, especially when you are notching 4130.

These hole saws work great with our tubing notcher. It is important to have high quality hole saws when notching steel tubing, especially when you are notching 4130.

Hitch PinSold individually.

This seat padding is made to give a more comfortable ride. Attaches to your seat easily with the provided snaps. Fits best with High Back Carbon Racing Seat

Deigned for all drag cars, pro street, door slammers or your daily street car. Constructed of carbon fiber with foam coring for added strength. Seat width 17" Seat depth 14" Seat Height 34" This item will have an oversize fee when shipped via...

This hex wing strut is made from 6061-T6 aluminum hex and has 10-32 RH & LH threads.Specifications:• Material: 6061-T6 aluminum• Threads: 10-32

Weld this hook to your chassis on a 1-5/8" tube to give you a solid convenient hanger.

Hang your helmet with one of our Quarter-Max helmet hooks. Made from aluminum, the hook mounts on your roll cage so you can choose the most convenient place to hang your helmet.Specifications:• Material: Aluminum• Tube diameter: 1.5 in.•...