Quarter-Max's Pro Series 4-link chassis brackets were designed to hold up to high horsepower and have been race proven on RJ Race Cars for years. They are manufactured in-house to high quality specifications with precise hole locations and smooth...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Spindle Nut Wrench for 4-3/4" & 5" Floater Kits

Strange Engineering bracket spacer for RJ-201221-2-AS Strange Modular Extreme Pro Series 4-Link Housing Brackets for Billet Adjustable Shock Mounts with Doublers, Welded, Zinc Plated.Requires qty (2) spacers for set of 4 brackets.Sold each.

Replace the cylinder on your air launchers.

Use this wrench to easily wind up chute launcher springs. Features a 6-point 15/16” socket end. 39-1/4” overall length. Powdercoated black.

Light weight replacement air launcher Ram plate made of .125 6061-T6 Aluminum Plate.

This ultra lightweight air chute launcher features a recessed chute launcher disc design that decreases the chance of chute failures. Comes with mounting plate, chute launcher discand air cylinder. Plate size 7.6250" x 7.6250". Fits a small pack...

Replacement air launcher Ram plate made of .125 6061-T6 aluminum plate.

This air launcher is designed to work with large pack parachutes. The mounting plate and plunger plate are made from .125 6061T6 aluminum. Kit includes base mount plate, air cylinder and plunger plate. Plate size 8.750" x 8.750"    Kit...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Quarter-Max's Extreme Pro Series 4-link housing brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. With 19 holes of adjustment, these housing brackets provide you with more adjustability...

Quarter-Max's Extreme Pro Series 4-link housing brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. With 19 holes of adjustment, these housing brackets provide you with more adjustability...

Body exhaust rings, also referred to as body exhaust flanges, provide a professional, finished look while protecting the paint & body around the side exit headers. Includes hardware.Specifications:• Size: 7-1/8 in. x 5-7/8 in.• Style:...

Quarter-Max's Strange Engineering Modular Extreme Pro Series 4-Link Housing Brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. Our extreme pro series version for the Strange modular...

Quarter-Max's Strange Engineering Modular Extreme Pro Series 4-Link Housing Brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. Our extreme pro series version for the Strange modular...

Quarter-Max's Pro Series 4-link housing brackets were designed to hold up to high horsepower and have been race proven on RJ Race Cars for years. They are manufactured in-house to high quality specifications with precise hole locations and smooth...

Quarter-Max's 4-link housing brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. These brackets feature a 1 in. hole spacing. Designed to be used with our billet adjustable shock...

Specifications:• I.D.: .500"• Large Step O.D.: .750"• Large Step Width: .302"• Small Step O.D.: .625"• Small Step Width: .105"• Overall Width: .407"• Material: Titanium• Commonly used for the wheelie bar wheel...

  Driveshaft Tunnel Kit, Pro Mod Top Rail Style, 30 in., 4130This top rail style tunnel kit is designed to mount vertically in the rear with the adjustable loop and horizontally in the front by using the straight tubing across the top of the double...

Driveshaft Tunnel Kit, Pro Mod Style, 30 in., 4130 In the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or broken driveshaft.Our kit comes complete with the unwelded...

These are the same control arm mounts used at RJ Race Cars. The .125" thick brackets are made of 4130. .095" thick gussets for added strength. NAS bolts, jet nuts, AN washers and misalignment bushings are included.

Commonly the most overlooked component in a fuel system, filter neglect can be the most costly. If not cleaned or replaced regularly, filter elements can become clogged resulting in reduced fuel flow, engine performance and ultimately, fuel pump or even...

P/N 12602 100-M Stainless Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2-1/2″ OD x 7″ long ORB-12 filter housings. Suitable as a pre-filter for fuel pumps up to 6 GPM with gasoline, diesel, ethanol and...

AN-10, 100 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-10, 40 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-10, 10 micron cellulose element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-10, 10-micron microglass element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-08, 40 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-08, 10-micron microglass element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications,...

AN-06, 10-micron microglass element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

AN-12 ,40 micron stainless steel element, nickel chrome finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum...

An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications, our...

An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications,...

Aluminum lug nut with integral steel washer. Specifications• Material: 7075-T6 aluminum• Finish: Black anodized• Overall Height: .850″• Thread: 11/16″-18• 1.302″ OD at washer• 1-1/6″ wrench size Sold...

Cynergy’s re-done (2017) C7 Z06 has made the following improvements based on a very thorough CFD Aero Analysis: • Coefficient of Drag Improved from 0.281 original to 0.247 for new 2017 Z06 (which is a 13.75% improvement)• Removed almost...

Cynergy’s re-done (2017) C7 Z06 has made the following improvements based on a very thorough CFD Aero Analysis: • Coefficient of Drag Improved from 0.281 original to 0.247 for new 2017 Z06 (which is a 13.75% improvement)• Removed almost...

Cynergy’s re-done (2017) C7 Z06 has made the following improvements based on a very thorough CFD Aero Analysis: • Coefficient of Drag Improved from 0.281 original to 0.247 for new 2017 Z06 (which is a 13.75% improvement)• Removed almost...