The Pro Series Tie Rod Tube Kit is designed to slip over and weld to Pinto tie rods that have been turned down. It includes 4130 tubes with wrench flats for quick and easy adjustment, Aurora HXAM high-misalignment rod ends, jam nuts, NAS bolts, jet nuts...

Quarter-Max's Pro Series 4-link housing brackets were designed to hold up to high horsepower and have been race proven on Quarter-Max race cars for years. They are manufactured in-house to high quality specifications with precise hole locations and...

The QM Pro Master Cylinders combine modified Mopar tandem-style housings with QM precision manufactured internal components to provide the proper hydraulic fluid volume and pressure capabilities for optimum braking performance. Components...

Our Pro Series Door Hinge Kit features 4 door mounting pads for customized mounting locations, allowing for more accurate door alignment as well as easier door removal. Just open the door and lift off! Made of 4130 and includes all hardware needed for...

• 2" Long• RH & LH threads• CNC machined from hex bar stock• Used on our cars that we build in-house• Zinc platedTypically used for clutch linkages and anti-roll bar links. Sold Each.

Constructed entirely out of 4130, our custom fabricated 9" Ford housing is second to none. All TIG welded and built on custom fixtures to assure perfect alignment. Features 1/4" Pro Series 4130 4-Link Brackets, back brace, torsion bar mounts, wheelie bar...

Quarter-Max 9" Ford fabricated floater housings are custom-built for extreme drag racing applications and are made of 4130 steel. We use these same housings under most of the high horse-powered Pro Modified cars built at Quarter-Max. We recommend...

Fabricate your own Pro Series 9 in. Ford housing with our fabricated housing kit.  Kit includes 9 in. Ford housing face plate, banjo, inside bulkhead supports, 45 in. short and long axle tubes, fill cap and bung, drain plug and bung.  Housing...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons;...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons;...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has the standard 5 hole bolt pattern. Steering wheel weighs ...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-5 buttons, 2 on...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-5 buttons, 2 on...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has the standard 5 hole bolt pattern. Steering wheel is...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

Diagonal link kits are a very simple method to center the rear end. Our Heavy Duty Diagonal Link Kit is designed for use with our Pro Series 4-Link Kits and cannot be used on ladder bar kits.This kit features custom CNC-cut aluminum clevises, 1" O.D. x ...

Install a funny car cage in your project car using our tubing and print kit. Tubes are individually numbered to correspond to the numbers on the print. Some modifications to tube bends may be required for your applications.

Quarter-Max's Extreme Pro Series 4-Link Kit offers more strength and adjustability than our standard Pro Series kit. For extra strength, this kit features our high quality 1-1/2 in.x.095 in. 4130 Pro Series 4-link bars. The Quarter-Max Extreme Pro...

Quarter-Max's Extreme Pro Series 4-link chassis brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. With 16 holes of adjustment, these chassis brackets provide you with more adjustability...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link. Our Extreme Pro Series Wishbone is the ultimate wishbone designed specifically...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Extreme Pro Series Wishbone is the ultimate wishbone designed specifically...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Extreme Pro Series Wishbone is the ultimate wishbone designed specifically...

Tap is for the Quarter-Max Threaded Adjustable Strut Mount kit. GH6 Bottoming Tap 1-3/4"-12 threads

This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a dedicated fixture.  Specifications:• Bracket...

Our Extreme Pro Series Slim-Line Wheelie Bar Kits are designed to save weight and fabrication time over the Pro Series kits. This kit provides extra strength with a full x-brace and 1-1/4 in. OD x .065 in. wall 4130 tubing. Wheel housings come...

The new innovative Rick Jones design is here! Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with...

Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven by our own in-house NHRA Pro Stock race team with consistent and flawless results every run. Rod ends...

Our 45-spline cross shaft is gun-drilled and heat treated in order to maximize strength while minimizing weight. Steel bearing cups are included in the kit for mounting the cross shaft in place spherical bearings and billet 4130 arms round out the key...

In 2006 Rick Jones invented the first ever Threaded Adjustable Strut Cup Mount to add more adjustability to the front suspension. Ever since, racers and builders alike have ranked the Quarter-Max Threaded Adjustable Strut Cup Mount as one of the most...

This is the best pedal kit on the planet!! Bar none! The pedal shaft is 1.375” O.D. gun drilled and heat treated and splined on both ends for no flex! It comes with knurled pedal pads for added grip. It comes with everything you need to mount the...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

This set of two additional drawings and material list make it possible to convert any of our existing blueprints and chassis kits into double frame rail cars!   In comment box during check out please supply us with you desired wheel base.  

Our chassis blue prints are exactly what you’ve been looking for! This bound book contains 10 separate views with color coded tubes. Easy to read and follow. Complete tubing and bracket list is included to ease the building process. Each tube is...

This rugged grade 8 rim screw is used to keep your tires from rolling off the rim. The self-tapping screws feature a built-in washer face for maximum holding strength. Drill rims with a 13/64 in. drill bit. Do not oversize! Use with 3/8 in. socket...