SS brake bracket Material 0.090" 4130   Hole size 0.190"

This RPM-Activated Switch will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, has two activation wires; one to ground a circuit and the other to...

Please call for current pricing due to the fluctuation of material cost. This item ships truck freight only.  Please call 309-343-7575 to order. Kit includes: front clip, left hand door, right hand door, deck lid, main body, and dashboard. All...

Please call for current pricing due to the fluctuation of material cost. This item ships truck freight only.  Please call 309-343-7575 to order. Kit includes: front clip, left hand door, right hand door, Deck lid, Main body, and dashboard. All...

Please call for current pricing due to the fluctuation of material cost. This item ships truck freight only.  Please call 309-343-7575 to order. Kit includes: front clip, left hand door, right hand door, deck lid, main body, and dashboard. All...

This kit is designed to mount to the roof. Comes with nickel plated tow hook and 4130 Chromoly mount tube. Welding required.

Plated Roof Tow Hook designed to slide into a tube in the roof of the car. No pin required to keep the hook in place. 3/8" O.D.

45mm O.D./20mm Wide/ 35mm Shaft For more information call 877-702-7575; E-mail website comments located in "contact us" on title bar of our website.

The Rocker Panel Mount Kit includes all the required hardware and components to properly mount your rocker panels.This item will have a discounted oversize fee of $60.00 when shipped via ground delivery to the contiguous 48 United States.

Specifications:• Material: 4130• Thickness: .040"

Our new e-glass inner pans make assembling a hood scoop as easy as it can get. This glass pan is molded to fit the inside of the QM F1-4 Hood Scoop, no more fiberglassing to the inside of the scoop. Cuts hours off assembly time! Cut out the recessed...

Our new e-glass inner pans make assembling a hood scoop as easy as it can get. This glass pan is molded to fit the inside of the QM F1 Hood Scoop, no more fiberglassing to the inside of the scoop. Cuts hours off assembly time! Cut out the recessed...

Drag Race Use Only For Spindle Mount Wheels Require Wheels Designed For Anglia SpindlesThese are not the same as Strange aluminum strut spindles FeaturesCompact design suits low profile body stylesIntegral body & spindle allows piston to travel below...

Drag Race Use Only For Spindle Mount Wheels Require Wheels Designed For Anglia SpindlesThese are not the same as Strange aluminum strut spindles FeaturesCompact design suits low profile body stylesIntegral body & spindle allows piston to travel below...

Drag Race Use Only For Spindle Mount Wheels Require Wheels Designed For Anglia SpindlesThese are not the same as Strange aluminum strut spindles FeaturesCompact design suits low profile body stylesIntegral body & spindle allows piston to travel below...

Drag Race Use Only For Spindle Mount Wheels Require Wheels Designed For Anglia SpindlesThese are not the same as Strange aluminum strut spindles FeaturesCompact design suits low profile body stylesIntegral body & spindle allows piston to travel below...

High PerformanceLow FrictionSynthetic wheel bearing greaseUsed on every new RJ Race Car! Race proven! Contains 8 oz.

QM Transmission, Rear Gear, Tire Ratios vs. Air Correction Factor Calculator This software is used by top crew chiefs to help determine changes needed to be made from track to track and changing weather conditions. All you have to do is plug in the...

This simple toe hook kit allows you to easily update your RJ or QM throttle pedal to be able to disengage a stuck throttle with your foot. Simply drill and bolt the hook to your pedal. Fits 5/8" O.D. tubing.

RJ Race Cars logo on a black hat with silver and white stitching.Specifications:• Style: Flex fit• Available Sizes: S/M & L/XL• Color: Black

QM Quarter Turn Fastener Plate, Short, Mild SteelSpecifications:• Material: Mild steelSold individually. DISCOUNT ON IN STOCK INVENTORY ONLY! LIMITED QUANTITIES AVAILABLE - ONCE THEY ARE GONE - THE DISCOUNT IS GONE TOO! All clearance item sales...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Pro Series Wishbone features 1/2” and 3/8” NAS bolts, Mil Spec nuts,...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.This kit is the perfect strength for Top Sportsman car type applications. Not...

Upgrade your Quarter-Max wishbone with our precision CNC Pro Series Wishbone Slide Tube. Machined wrench flats to tighten rod end jam nut. Greasable.Specifications:• Material: 4130• O.D.: 1"• Includes grease fitting.Does not include rod...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Pro Series Wishbone Kit features 1/2” and 3/8” NAS bolts, Mil Spec...

The Pro Series Tie Rod Tube Kit is designed to slip over and weld to Pinto tie rods that have been turned down. It includes 4130 tubes with wrench flats for quick and easy adjustment, Aurora HXAM high-misalignment rod ends, jam nuts, NAS bolts, jet nuts...

Quarter-Max's Pro Series 4-link housing brackets were designed to hold up to high horsepower and have been race proven on Quarter-Max race cars for years. They are manufactured in-house to high quality specifications with precise hole locations and...

The QM Pro Master Cylinders combine modified Mopar tandem-style housings with QM precision manufactured internal components to provide the proper hydraulic fluid volume and pressure capabilities for optimum braking performance. Components...

Our Pro Series Door Hinge Kit features 4 door mounting pads for customized mounting locations, allowing for more accurate door alignment as well as easier door removal. Just open the door and lift off! Made of 4130 and includes all hardware needed for...

• 2" Long• RH & LH threads• CNC machined from hex bar stock• Used on our cars that we build in-house• Zinc platedTypically used for clutch linkages and anti-roll bar links. Sold Each.

Fabricate your own Pro Series 9 in. Ford housing with our fabricated housing kit.  Kit includes 9 in. Ford housing face plate, banjo, inside bulkhead supports, 45 in. short and long axle tubes, fill cap and bung, drain plug and bung.  Housing...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons;...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons;...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has the standard 5 hole bolt pattern. Steering wheel weighs ...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-5 buttons, 2 on...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-5 buttons, 2 on...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has the standard 5 hole bolt pattern. Steering wheel is...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a sure grip. The wheel has provisions for Qty-4 buttons; 2...