Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Quarter-Max Wishbone Kit comes complete with rod ends, housing mounts, and all...

The Quarter-Max Battery Tray is a quick, economical way to mount a single battery. Weld the tray in place and bolt the battery in place with the included  hold-down. Length: 11" Width: 7" Height: 4"

Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...

Fabricate your own 9 in. Ford housing with our Quarter-Max fabricated housing kit. Kit includes a Quarter-Max 9 in. Ford housing face plate, banjo, inside bulkhead support, 45 in. or 60 in. short and long axle tubes, fill cap and bung, drain plug and...

Push Pull Pin, 1/4 in. x 5/16 in.Specifications:• Grip Length: 5/16 in.• Pin Diameter: 1/4 in.Sold individually. DISCOUNT ON IN STOCK INVENTORY ONLY! LIMITED QUANTITIES AVAILABLE - ONCE THEY ARE GONE - THE DISCOUNT IS GONE TOO! All clearance...

Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs are constructed of carbon fiber and reinforced with carbon fiber...

Our Carbon Fiber Universal Four-Piece Trunk Floor Kit makes finishing the trunk of your car quick and easy. Simply trim in various places and screw/rivet together to give you a custom fitted radiused carbon trunk floor.This item will have a discounted...

This is lightweight pure carbon fiber inner pan can be trimmed to fit your hood scoop.

This lightweight carbon fiber sheet comes in a 1 ft x 4 ft piece. It can be used to make specialty panels for your dash, ignition, or any other projects that require carbon fiber. Specifications:• Size: 1 ft x 4 ft• Thickness: .060 in.•...

Pull Pin Lanyard, 3/8 in. x 4 in.Specifications:• Style: Pull Pin Lanyard• Grip Length: 4 in.• Pin Diameter: 3/8 in.Sold individually.

Pull Pin, 5/16 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 5/16 in.Sold individually.

Pull Pin, 3/8 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 3/8 in.Sold individually.

Pull Pin, 3/16 in. x 13/16 in.Specifications:• Grip Length: 13/16 in.• Pin Diameter: 3/16 in.Sold individually.

Pull Pin, 3/16 in. x 1/2 in.Specifications:• Grip Length: 3/16 in.• Pin Diameter: 1/2 in.Sold individually.

Pull Pin, 1/4 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 1/4 in.Sold individually.

Pull Pin, 1/2 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 1/2 in.Sold individually.

This kit includes our pro series wing support kit plus brackets, struts, and hardware necessary to secure spill plates to your pro series or custom carbon wing. Includes 4 wing struts with rod ends, mounts, hitch pins, stainless steel pull pins and all...

This kit includes 4 wing struts with rod ends, mounts, hitch pins, stainless steel pull pins, and all hardware.

Includes net clip brackets, net retaining plate, and hardware to install window nets with attached push-button clips. • 4 hole style fits Stroud #505RJGA• 5 hole style fits Stroud #505RJGA-2

Our Pro Series Steering Column Kit is designed to mount easily in any chassis. Features steel tubing and an aircraft quality u-joint with sealed lubrication (for tight motor compartments or header clearance). This kit also includes a column tube with...

Constructed of 4130 Includes 2 weld-on bosses for chassis Features wraparound strap for the fuel cell and hardware Designed to mount a Jaz Pro Stock 1.5 or 2 gallon fuel cell (not included) and fuel pump (not included) Due to variations in the...

Our ultimate clutch linkage kit is used in construction of our Pro Stock cars. Kit includes 2 in. tapped link, 4340 high misalignment rod ends and jam nuts. Welding required.

The Pro Series Clutch Linkage Kit includes a 12 in. long 4130 tube, right & left-hand tube adapters, 4340 high misalignment rod ends and jam nuts. Welding required.

For a customized look and feel, try our Pro Series Brake push rod. This kit comes with a 16” long 3/4” x .058 4130 tube you cut to length, right and left hand tube adapters, and rod end. The Pro Series kit gives you smooth, consistent pedal...

Magnetically triggered switch normally open and closed with magnet passage. Same as supplied with Racepack Computer Systems. Fits 3/8" diameter hole in mount bracket.

The Electrimotion Safety Shutoff receiver for Pro Stock, Comp, Nitrous Pro Mod cars is designed to shut the car off and deploy the parachutes as the car passes the wall mounted shut off transmitter which is usually mounted 400ft beyond the...

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease...

This item will have a discounted oversize fee of $250.00 when shipped via ground delivery to the contiguous 48 United States.ProJack Race Car Stands is the proud designer and creator of the ProJack race car lift system which has revolutionized the method...

This item will have a discounted oversize fee of $250.00 when shipped via ground delivery to the contiguous 48 United States.ProJack Race Car Stands is the proud designer and creator of the ProJack race car lift system which has revolutionized the method...

This item will have a discounted oversize fee of $250.00 when shipped via ground delivery to the contiguous 48 United States.ProJack Race Car Stands is the proud designer and creator of the ProJack race car lift system which has revolutionized the method...

Easily store your ProJacks out of the way on the wall in your trailer or shop. Set your jacks in the pouch holder and pin the top. Jacks are stored in two separate pouches 3" deep each. 24" wide, about 7" tallest point. Black-wrinkle powder coated...

Use this replaceable Pro Jack handle on any set of Pro Jacks that will accept the threaded hub.

Weld this 4130 Chromoly bracket to your chassis for a positive lifting point for the rear ProJack lifting system. Requires two brackets per car. (welding required) Sold Each.

This motor plate is made from 1/4" thick 6061-T6 aluminum and has a Small Block Chevy bolt pattern. This motor plate is profiled. Fits Aurora Short Block only. Specifications• Made of 6061-T6 1/4" aluminum • 32" overall...

Thickness .125" Made of 4130

Thickness .125" Made of 4130

This item ships by truck freight only. Please call 309-343-7575 to order.Our custom built Pro Stock chassis is designed to meet the special demands of your chosen class. Each welded RJ chassis is fabricated by skilled craftsmen and heli-arc tig welded on...

This item ships by truck freight only. Please call 309-343-7575 to order.So you want to build a truck? We have just the chassis kit for you. These kits are based off the now defunct Pro Stock Truck class and come with detailed blueprints and individually...

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field (i.e. drag chutes). These chutes were designed from the start to be user friendly. Stroud Safety has nearly 50 years experience in parachute design and manufacture. After much...

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field (i.e. drag chutes). These chutes were designed from the start to be user friendly. Stroud Safety has nearly 50 years experience in parachute design and manufacture. After much...