Quarter-Max

These brackets can be used on virtually any type of chassis. They weld to existing crossmembers to allow for quick and easy removal of your transmission.

Material: .090" 4130  

Thickness .125" MAde of 4130

QM's Trans Crossmember can be used on virtually any type of chassis. Designed to allow for quick and easy removal of your transmission, this kit comes complete with all hardware and brackets...

Mounts to the side of Lenco Cs-2&3   Material 1/4" Aluminum

Toyota 2JZ Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 8" overall height • 38" overall width

Use this top strut socket wrench to remove and install the top strut nut on our adjustable struts.   Zinc plated.    Size: 15/16" 

Thickness .125" 4130

0.090" 4130 Plate

Thickness .090" Made of 4130

Our adjustable toe-in gauge is smaller and more compact than others on the market.  Breaks down in seconds to store in your trailer cabinet or in your shop.  Scribe a true line in the tire...

Dimensions: Inside Diameter 0.385" Outside Diameter 0.495 Length 0.156" Outside Diameter 0.625 Length 0.844"Specifications:• I.D.: .385"• Large Step O.D.: .625"• Large Step Width: ...

Specifications:• Material: Titanium• Thickness: .050"• Style: 2 holes

Our new slide mount for the Liberty transmissions comes with a urethane mount to help control the transmission's torque. Made of titanium.

Weight Bar Tab, Short, TitaniumThis weld-on tab offers you a quick and easy way to mount your ballast.  Specifications:• Material: Titanium• Thickness: 1/8 in.• Hole Size: 1/2 in...

This is the same dimensions as our 410090 bracket. Material is 6AL-4V  Titanium with a .375” hole. .125" thick    Sold each  

Additional cut charges may apply. To qualify for length prices, complete lengths must be ordered with no cutting. Customers ordering lengths of tubing cut to specific sizes will be charged the cut...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 5/8-18• Size: 1-1/4 in. OD x .065 in. W tube•...

This gas pedal pad is made from .090” thick 6AL-4V Titanium Sold each

.125" Thick 6AL-4V Titanium This bracket is the side panel of our Pro Wheelie Bar housing part #201204-3 and part #201204-4

.090" Thick 6AL-4V Titanium

This is used for building Titanium gas pedals. Has qty 5 - ¼” holes Made from .125” thick 6AL-4V Titanium   Sold each

This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a...

Our dual parachute mounts will accept any brand of parachute. Features pre-welded pack mounts and is constructed of 3/8" titanium.  The dual parachute mounts are designed to deploy the 2 chutes...

Upgrade your front-end geometry with the ultimate combination of strength and weight reduction. These lower control arms are precision-engineered specifically for use with Strange Ultra Struts,...

Lighten up your car with these super lightweight titanium front end forks & stoppers. Includes:• Qty 2 - 6AL-4V titanium forks• Qty 2 - Adjustable stops• Hardware Sold in a pair.

Lighten up your car with this super lightweight Titanium Front End Fork Mount Kit. Features 4130 chassis fork mounts and 6AL-4V titanium forks and stoppers. Includes hardware.Sold in a pair.

.125" thick Titanium Plate. This bracket belongs to the titanium front end fork kit Part #219608 Front fork brackets sold each.

This pad is used for making lightweight Titanium brake or clutch pedals made from .090” 6AL-4V Titanium Sold each

This is the same dimensions as our 410041 made from  6AL-4V  Titanium with a .375” hole. .125" Thick    Sold each  

Driveshaft Tunnel Kit, Unwelded Cover, 18 in., TitaniumIn the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or...

Slot Clevis, Fits 1 in. OD x .070 in. W Tube, .250 in. Slot, .375 in. Hole, TitaniumDesigned to mount titanium driveshaft loops.Specifications:• Fits tube: 1 in. OD x .070 in. W• Slot size:...

Mount to firewall and use for power supply for your timing light.

This bearing fits all of our throwout bearing collars.

This is designed bolt directly to a manifold bolt and it tall enough so the spring will reach the carburetor. Works great on single 4 barrel applications. (Spring sold separately) Sold...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 1/4-28• Size: 3/8 in. OD x .049 in. W tube•...

This 3/8" hole bracket allows for easy attachment of your return spring. The spring is part #214107.

Prevent broken throttle linkage and stuck open throttles by limiting your pedal movement with our throttle pedal stop kit. This kit welds to the chassis or steering column. Welding required.

This floor mounted gas pedal is widely use in blower applications but can also be used in any applications that uses a throttle cable. It is constructed out of 4130 tubing. The pedal has 5 different...

Throttle pedal pad  Material 0.060" 4130