Quarter-Max

Upgrade your Quarter-Max wishbone with our precision CNC Pro Series Wishbone Slide Tube. Machined wrench flats to tighten rod end jam nut. Greasable.Specifications:• Material: 4130• O.D.:...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Pro Series Wishbone Kit...

The Pro Series Tie Rod Tube Kit is designed to slip over and weld to Pinto tie rods that have been turned down. It includes 4130 tubes with wrench flats for quick and easy adjustment, Aurora HXAM...

Quarter-Max's Pro Series 4-link housing brackets were designed to hold up to high horsepower and have been race proven on RJ Race Cars for years. They are manufactured in-house to high quality...

The RJ Pro Master Cylinders combine modified Mopar tandem-style housings with RJ precision manufactured internal components to provide the proper hydraulic fluid volume and pressure capabilities for...

Our Pro Series Door Hinge Kit features 4 door mounting pads for customized mounting locations, allowing for more accurate door alignment as well as easier door removal. Just open the door and lift...

• 2" Long• RH & LH threads• CNC machined from hex bar stock• Used on our cars that we build in-house• Zinc platedTypically used for clutch linkages and anti-roll bar...

Fabricate your own Pro Series 9 in. Ford housing with our fabricated housing kit.  Kit includes 9 in. Ford housing face plate, banjo, inside bulkhead supports, 45 in. short and long axle tubes,...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6...

This D shaped style wheel gives the driver 2 in. more leg room under the steering wheel. It is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6...

This steering wheel is made from 6061T-6 aluminum alloy. This unique design has a 12 in. O.D. rolled 1 in. aluminum 6061T-6 tube. The wheel has provisions for Qty-4 buttons, 2 on each side and has...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

This is the coolest and lightest steering wheel on the planet. Made of lightweight Aluminum Alloy, this unique design has a 13 in. O.D. rolled aluminum tube with holes for lightening and provides a...

Diagonal link kits are a very simple method to center the rear end. Our Heavy Duty Diagonal Link Kit is designed for use with our Pro Series 4-Link Kits and cannot be used on ladder bar kits.This kit...

Quarter-Max's Extreme Pro Series 4-Link Kit offers more strength and adjustability than our standard Pro Series kit. For extra strength, this kit features our high quality 1-1/2 in.x.095 in. 4130...

Quarter-Max's Extreme Pro Series 4-link chassis brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. With 16 holes of adjustment, these...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link. Our Extreme Pro Series...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Extreme Pro Series...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Extreme Pro Series...

Tap is for the Quarter-Max Threaded Adjustable Strut Mount kit. GH6 Bottoming Tap 1-3/4"-12 threads

This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a...

Our Extreme Pro Series Slim-Line Wheelie Bar Kits are designed to save weight and fabrication time over the Pro Series kits. This kit provides extra strength with a full x-brace and 1-1/4 in. OD...

The new innovative Rick Jones design is here! Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven...

The new innovative Rick Jones design is here! Our new Single Offset Wheelie Bar features a single wheelie wheel offset to the passenger side of the car, and a single top tube. Tested and race proven...

Our 45-spline cross shaft is gun-drilled and heat treated in order to maximize strength while minimizing weight. Steel bearing cups are included in the kit for mounting the cross shaft in place...

In 2006 Rick Jones invented the first ever Threaded Adjustable Strut Cup Mount to add more adjustability to the front suspension. Ever since, racers and builders alike have ranked the Quarter-Max...

This is the best pedal kit on the planet!! Bar none! The pedal shaft is 1.375” O.D. gun drilled and heat treated and splined on both ends for no flex! It comes with knurled pedal pads for added...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket...

This rugged grade 8 rim screw is used to keep your tires from rolling off the rim. The self-tapping screws feature a built-in washer face for maximum holding strength. Drill rims with a 13/64 in...

Our rim screw template makes marking holes for rim screws a breeze. The template is set up to space 16 rim screws around 15" wheels.Material: 5052 aluminum

This spring can be used as a throttle return or a clutch return.

Our new retractable roll out tape measure allows you to quickly and accurately measure roll out. The 120" polyester tape easily wraps around slicks without kinking and retracts into its convenient...