Quarter-Max

This pad is used for making lightweight Titanium brake or clutch pedals made from .090” 6AL-4V Titanium Sold each

This is the same dimensions as our RJ410041 made from  6AL-4V  Titanium with a .375” hole. .125" Thick    Sold each  

Driveshaft Tunnel Kit, Unwelded Cover, 18 in., TitaniumIn the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or...

Slot is .253” wide .375” hole size fits 1” .070” wall titanium tubing. Material 6AL-4V Designed to mount Titanium driveshaft loops Sold Each

Mount to firewall and use for power supply for your timing light.

Recommended for installation with new tie rods to protect your suspension equipment from dust and dirt.Includes qty-2 boots, qty-2 zip ties, and qty-2 clamps.

Includes 4130 tubes with wrench flats for quick and easy adjustment, AUR-HXAM high misalignment rod ends, jam nuts, NAS bolts, jet nuts and AN washers. Includes ball joints.Plated and welded.

This bearing fits all of our throwout bearing collars.

This is designed bolt directly to a manifold bolt and it tall enough so the spring will reach the carburetor. Works great on single 4 barrel applications. (Spring sold separately) Sold Each   ...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 1/4-28• Size: 3/8 in. OD x .049 in. W tube•...

This 3/8" hole bracket allows for easy attachment of your return spring. The spring is part #214107.

Prevent broken throttle linkage and stuck open throttles by limiting your pedal movement with our throttle pedal stop kit. This kit welds to the chassis or steering column and uses 4130 Chromoly...

This floor mounted gas pedal is widely use in blower applatcions but can also be used in any applications that uses a throttle cable. It is constructed out of 4130 tubing and has Non-Skid wire mesh...

Throttle pedal pad  Material 0.060" 4130

The ratio of our state-of-the-art throttle pedal kit gives you a smooth pedal feel. All 4130 Chromoly construction. The kit includes mounting tubes, all hardware, and the pedal! Features the Max Grip...

Throttle Pedal Bracket• Material: Steel• Hole sizes: 1/4"

The gauge panel is also known as a dash panel.Specifications:• Material: Aluminum• Hole Sizes: 2-5/8"• Style: 3 holes

Made from 7/8" .210 tube. Utilizes ½"-20 threads. Comes with bolts and rod end misalignment spacers.

3/16" Hole.160 Slot 10/32" Thread

1/4"-20 x 1/2" thread3/16" Hole

Threaded shock mount for use with Pro Series 4-Link kits.

Diameter: 3/8" Length: 1" Sold each.

T-Handle Push/Pull Pin Diameter: 1/4" Length: 1-1/2"Sold each.

T-Handle Push/Pull Pin Diameter: 1/2" Length: 1-1/2"Sold each.

T-Handle Push/Pull Pin Diameter: 1/2" Length: 1"Sold each.

T-Handle push/pull pin 1/4" x 1.0"Sold each.

Used to make overflow tanks Material .0625" 3003 Aluminum stamped with nice radiuis corner fits 4.0" O.D. tube. Sold each

Fits the overhead switch panel #214130

Our Swing Out Door Hinge Kit is designed with the correct geometry allowing the door to open away from the body. Primarily used on 63 Corvette bodies and other applications. The hinges are partially...

The quick and easy solution to installing tie down location in your trailer. This mount simply bolts to the floor of your trailer.All clearance item sales are final. Non-returnable.

This mount is designed to allow for the forward mounting hole locations of Powerglide transmissions. Use with the polyurethane mount for best results.

This new item is used to limit travel on your shocks. This design allows the Packer to slip over the shock shaft and it will stay in place. You can stack as many Packers as you need on top of each...

Material: .125" 4130

Overall Size: Approx 2.75 height 2.25 Length Holes: Center 0.375" and(2).312" Material: 4130 Thickness: 0.125”  

This handy tool permits the marking of sheet stock from a hidden pilot hole. Throat depth is 8" and it comes with hardened marking pin.

Quarter-Max's Strange Engineering Modular 4-Link Housing Brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles. Features: Integrated...

Adjust your Strange struts with our custom strut wrench.• Material: 4130• Thickness: .125"

This lightweight CNC machined parachute handle features a straight handle style. Specifications:• Thickness: 1/4 in.• Length: 8-3/4 in.• Material: 6061-T6 aluminum• Color/finish:...

This lightweight CNC machined parachute handle features a straight handle style. Specifications:• Thickness: 1/8 in.• Length: 8-3/4 in.• Style: Straight• Material: 6061-T6...

Use to balance your wheels. Each stick contains 12 segments of ¼ oz each for a total of 3 ounces of weight.