Quarter-Max

Replacement fuel filter.

Replacement Door Restraint also included in our RJ-211502 Door Stop Kit.Sold individually.

Replacement counter sink cutter bit for #8 100° head screws have 1/4” 28 threads 1/2” o.d. 3 flute.

Replacement counter sink cutter bit for #8 82° head screws have 1/4” 28 threads 1/2” o.d. 3 flute.

#6 Screw 100°

7 foot cable to the cable arming kit product #214215

Replacement 18v Nicad Battery for 18v O2 battery kit.

This charger is compatible with the 18v Battery Kit. Part #214157 

Easily bump the motor over from under the hood simply by pushing the button on this weatherproof starter switch.

Easily mount your remote starter switches to the firewall or chassis and protect them from accidental engagement at the same time!(welding required)

Ever realized you forgot to turn on the electrical power after you strapped yourself into the seat? This simple kit allows you to easily turn on the electrical power from the driver’s seat...

This fuel regulator mount is designed to mount most MagnaFuel regulators. Mounts the fuel regulator on (2) rubber vibration mounts to reduce vibration to the fuel regulator and aeration in the fuel...

Quarter-Max's Pro Twist Lock Charge Lugs offer a unique twist lock design for quick and secure charge connection. Designed to be utilized for the starter cable on the firewall or battery charge...

3/4" Red LED light with rubber grommet. Mount this light in the rear panel as a rear marker light. 

Protect your cable ends with this rubber protector. Fits a 1 to 2 gauge wire.

2" x 3" x .083" W Mild Steel Rectangular Tube. Sold per foot.Tubing is non-returnable and non-refundable.Please call 309-343-7575 to order. This item will have a discounted oversize fee depending...

Clean installation of tie down locations is possible when using our recessed ring mount. Make a cut-out in your floor to provide you with a smooth finished surface.

Used to mount body accessories to the chassis.Specifications:• Material: CR 1018• Thickness: .032" • Hole sizes: 1" & 1-1/4"

Use these 1” spring spacers to give your car a lift. For 2-1/2” I.D. springs. Sold as a pair. 

Rear Shock Gusset is made of 0.090" thick 4130 chromoly.

Weld this bracket to your rear end housing to mount your shock sensor.Specifications:• Material: Steel

Designed to mount the rear of a glass front end to the firewall and the front of the rocker panel. This kit comes complete with quarter turn fasteners and springs. Welding required.

Thickness .090" Made of 4130

REAR END HOUSING COVER .090 THK 4130

Self-adhesive heater pads for preheating oil pans, tanks, automatic transmissions, or rear ends.

.090" 4130

This rear driveshaft loop enclosure meets all rule requirements to be mounted within 6” of the rear u-joint. It welds to the back of the rear driveshaft loop.   Material is 1” x ...

Material .050 4130

Material .125" CRMS

Specifications • Made of 1/8" CRMS• Fits a 1-1/8" tube • 1/4" hole size 

Our new radiator-mount aluminum tool tray provides a temporary solid surface for tools and parts at the front of the engine compartment. The tray is 22" x 12" and includes plated mounting tubes...

Radiator overflows are required by all sanctioning bodies. This 1 quart all aluminum overflow tank features -3 male fitting on top and 1/4 turn drain on bottom.

Radiator Overflow Kit Part #212105 This 1 qt. all aluminum overflow tank features a 1/4" NPT-1/4 turn valve in the bottom, a -3 AN to 1/8" NPT 90 degree fitting at the top, and a 12" -3 AN...

This laser cut aluminum bracket makes it easy to bolt your overflow tank to your radiator. The bracket features sloted holes to allow some room for vertical postioning, and to accomodate most...

This 1 qt. all aluminum overflow tank features a 1/4" NPT-1/4 turn valve in the bottom, a -3 AN to 1/8" NPT 90 degree fitting at the top, and a 12" -3 AN premade braided line. You must purchase a...

This kit allows for the easy mounting of any lightweight radiator. The all 4130 Chromoly mount kit allows easy access to the radiator and quick removal from the race car. Complete with laser cut...

Material .062" 4130   Hole size 0.3155"

Rack Mount Gusset 0.090" thick 4130

The Pinto-Style Manual Rack and Pinion Combo Kit includes the Flaming River Standard FR1501 or Narrowed FR1501-2 Rack and Pinion, RJ-203107 Billet Rack & Pinion Mount Kit, and the...

These clevises are designed to screw on to a pinto style rack & pinion. They have 14MM x 1.5 pitch female threads. Designed to replace the old style “ball joint” style tie rods. The...