These brackets can be used on virtually any type of chassis. They weld to existing crossmembers to allow for quick and easy removal of your transmission.

Material: .090" 4130  

Thickness .125" MAde of 4130

RJ's Trans Crossmember can be used on virtually any type of chassis. Designed to allow for quick and easy removal of your transmission, this kit comes complete with all hardware and brackets necessary. The brackets are also available separately for cars...

Mounts to the side of Lenco Cs-2&3   Material 1/4" Aluminum

FREE SHIPPING within the contiguous 48 United States!The Track Meter is a simple to use tool that when used correctly provides consistently accurate measurements of the race track’s surface. By standing on the Track Meter’s machined aluminum...

Toyota 2JZ Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 8" overall height • 38" overall width

Use this top strut socket wrench to remove and install the top strut nut on our adjustable struts.   Zinc plated.    Size: 15/16" 

Thickness .125" 4130

Our custom built Top Sportsman chassis is designed to meet the special demands of your chosen class. Each welded RJ chassis is fabricated by skilled craftsmen and heli-arc tig welded on a surface plate jig to achieve maximum precision and unmatched...

Material .090 4130 RJ LOGO COVER - PRO WHEEL HOUSING 4130

0.090" 4130 Plate

Thickness .090" Made of 4130

Our adjustable toe-in gauge is smaller and more compact than others on the market.  Breaks down in seconds to store in your trailer cabinet or in your shop.  Scribe a true line in the tire face.  Adjust the width of the pointers to line up...

Dimensions: Inside Diameter 0.385" Outside Diameter 0.495 Length 0.156" Outside Diameter 0.625 Length 0.844"Specifications:• I.D.: .385"• Large Step O.D.: .625"• Large Step Width: .844"• Small Step O.D.: .495"• Small Step Width: ...

Specifications:• Material: Titanium• Thickness: .050"• Style: 2 holes

Our new slide mount for the Liberty transmissions comes with a urethane mount to help control the transmission's torque. Made of titanium.

Weight Bar Tab, Short, TitaniumThis weld-on tab offers you a quick and easy way to mount your ballast.  Specifications:• Material: Titanium• Thickness: 1/8 in.• Hole Size: 1/2 in.Sold individually.

This is the same dimensions as our RJ-90 bracket. Material is 6AL-4V  Titanium with a .375” hole. .125" thick    Sold each  

Titanium tubing is sold per foot. Additional cut charges may apply. To qualify for length prices, complete lengths must be ordered with no cutting. Customers ordering lengths of tubing cut to specific sizes will be charged the cut price. Tubes cut 8...

Our tube adapters are CNC manufactured in-house to high quality specifications. Specifications:• Thread: Right hand• Thread Size: 5/8-18• Size: 1-1/4 in. OD x .065 in. W tube• Style: Short• Material: TitaniumSold individually.

This gas pedal pad is made from .090” thick 6AL-4V Titanium Sold each

.125" Thick 6AL-4V Titanium This bracket is the side panel of our Pro Wheelie Bar housing part #201204-3 and part #201204-4

.090" Thick 6AL-4V Titanium

This is used for building Titanium gas pedals. Has qty 5 - ¼” holes Made from .125” thick 6AL-4V Titanium   Sold each

This ultra light weight gas pedal is made from 6AL-4V Titanium and weights just .40 of a pound !!!! It has qty - 5 ¼” holes for different ratios. Sold each

This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a dedicated fixture.  Specifications:• Bracket...

Our dual parachute mounts will accept any brand of parachute. Features pre-welded pack mounts and is constructed of 3/8" titanium.  The dual parachute mounts are designed to deploy the 2 chutes in separate directions for reduced chance of...

These titanium lower control arms are made to fit Strange Ultra Struts only. Does not include bearings, snap rings, or rod ends. Sold in pairs.

Install this light weight titanium shifter tower to your Lenco transmission. Comes complete with three push button and an air dump switch prevision. Also comes with a quick release pull pin for easy removal.     Weighs .80 pounds

Lighten up your car with these super lightweight titanium front end forks & stoppers. Includes:• Qty 2 - 6AL-4V titanium forks• Qty 2 - Adjustable stops• Hardware Sold in a pair.

Lighten up your car with this super lightweight Titanium Front End Fork Mount Kit. Features 4130 chassis fork mounts and 6AL-4V titanium forks and stoppers. Includes hardware.Sold in a pair.

.125" thick Titanium Plate. This bracket belongs to the titanium front end fork kit Part #219608 Front fork brackets sold each.

This pad is used for making lightweight Titanium brake or clutch pedals made from .090” 6AL-4V Titanium Sold each

8-5/8" 6.2 spec. Titanium Bellhousing, AlcoholPlease download the order form or request one though our sales department at 309-343-7575 or sales@rjracecars.com.

8-5/8" 6.3 spec. Titanium Bellhousing, Pro ModPlease download the order form or request one though our sales department at 309-343-7575 or sales@rjracecars.com.

8-5/8" 6.1 spec. Titanium Bellhousing, Pro StockPlease download the order form or request one through or sales department at 309-343-7575 or sales@rjracecars.com.

This is the same dimensions as our RJ410041 made from  6AL-4V  Titanium with a .375” hole. .125" Thick    Sold each  

Driveshaft Tunnel Kit, Unwelded Cover, 18 in., TitaniumIn the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the driver from a loose or broken driveshaft.Our kit comes complete with the...

Slot Clevis, Fits 1 in. OD x .070 in. W Tube, .250 in. Slot, .375 in. Hole, TitaniumDesigned to mount titanium driveshaft loops.Specifications:• Fits tube: 1 in. OD x .070 in. W• Slot size: .250 in.• Hole size: .375 in.• Material:...