Designed to fit most tube chassis cars with big block Chevy 4.840" bore spacing 5/16" stainless steel flanges 2-1/4” to 2-3/8” step primary tube size option comes with 3-1/2” to 4-1/2” megaphone merge collector 2-3/8" to...

5" Bore 2.5" Tube Size 5/16" Thick

Stainless Steel EGT Weld In Bung.

GM ApplicationsPowerglideTH200 4RTH350TH700 R4T564L604L60EMuncie M20 / M21 / M22Super T-10 (1st design) Forged 4340 Chrome Moly Fully Machined Steel– Maximum strength for extreme applications– Additional material in critical areas–...

Thickness .090" Made of 4130

GM MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Clutch

This small profile, stainless steel latch can be used nearly anywhere you would want an access door that needs to be held tightly closed.Specifications:Material: Stainless steel

This window tab can also be used as a spoiler tab.Specifications:• Material: Mild steel• Thickness: .095"• Style: 2 holes

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2015 Chevrolet C7 Corvette• Material: Stainless steelThis item will have a discounted oversize...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2014 Dodge Dart• Material: Stainless steelThis item will have a discounted oversize fee of $35.00...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2019-2023 Chevrolet Camaro - Five Star• Material: Stainless SteelThis item will have a discounted...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2012 Chevrolet Camaro• Available Materials: Aluminum & stainless steelThis item will have a...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose.Specifications:• Body: Pontiac GXP• Material: Stainless...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose.Specifications:• Body: 2010 Ford Mustang• Material:...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose.Specifications:• Body: 2012 Dodge Avenger• Material: Stainless...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose.Specifications: • Body: Chevrolet Cobalt• Material: Stainless...

This aluminum tray is designed to fit the split Holley Dominator or similar carburetors. It is cut on a water jet for a precise fit. It's 2-piece design allows the pieces to overlap in the middle to be bolted or riveted together. Made from .050" 5052...

The connection between steering column and steering box may very well be one of the most crucial. Put these rack adapters in place for a quality fit. Proper installation will provide solid performance. Features:• Fits Mustang II / Pinto non-power...

Upgrade your wing support system with our spill plate support kit. This kit may be installed to support the rear of the spill plates. Includes all hardware.

GE50ET-2RS, Spherical Plain Bearing, Metric - Sealed - PTFE Lined Race - Alloy steel, heat treated, single fracture, phosphate coated, PTFE LinedBall - Alloy steel, heat treated, phosphate coated Specifications:• B - Ball Bore Max: 50.000 mm• B...

This Speedwire System was designed to be versatile, and installed in cars with naturally-aspirated engine combinations, including Pro Stock/Top Sportsman. System Features:• 10 Switch panel enclosed in extruded aluminum housing with serial...

Complete 6 stage pro series nitrous system with an 8 relay controller. The nitrous controller can be programmed from two to six stages to accommodate your individual needs. The switch panel shown with optional LED interior light, and billet mounting...

This Spark Plug Wire Sync Kit installs to the number one spark plug wire and senses the trigger signal and sends this information to the Ignition through a fiber optic cable. Features:• For cylinder per cylinder managementClick here to download the...

Our t-handle spark plug tool features a 5/8" swivel head socket on a 19" long bar. The t-handle is marked for easy indexing of the electrode location. This tool allows you to get to the plugs of your door car without leaning over the fenders or...

Now you can keep your spark plugs organized like a pro. Our new Spark Plug Indexing Kit gives you 20 labeled compartments for your plugs (not included) and one large compartment to store your engraver (not included), indexing block and blue marker...

Check your spark plugs with this handy tool. Illumination and magnification allows the spark plug base circle to be viewed clearly. Soft zippered storage case keeps the tool protected when not in use.

Index your spark plugs quickly and easily with our aluminum plug indexing block.

This plug organizer allows you to store 192 indexed spark plugs at one time. This is designed to work with our spark plug indexer part number #219857. It has 24 different index locations and will store up to qty-8 plugs for each index a total of 192...

This billet stainless steel indexer is machined with numbers for marking the position of the ground electrode. The indexer is knurled for hand held use, or can be secured in a vise on the machined flats. It has two threaded holes on the side of the...

.25" Aluminum 6061 T-6 The quick and easy way to provide connection between Strange Steering disconnect and Sparco Steering Wheel.

This delay switch will allow you to activate shocks or a second stage of nitrous as a function of time. Use the small switches on the top of the timer to set the amount of delay(0.1 to 102.4 sec).

Basic hand tool for installing aircraft smash rivets. This heat treated hand smash rivet tool features a unique adjustable rivet set holder which can be adjusted for various rivet lengths. Simply by removing 3 hardened pins, you can change the working...

Specifications:• Material: Mild steel• Hole Size: .130"

Specifications:• Material: Mild steel• Hole Size: .190"

Small radiator cap fitson the mini pro mod radiator.15" Wide x 7" Tall Pro Mod Radiator

DescriptionStrange Housing Ends - 1965-1973 Small FordSold as pair RequiresO-Ring Style Axle BearingsSpecial Retaining Plates Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide...

Material .032 mild steel

Specifications:• Material: Mild steel• Thickness: .065"• Style: 2 holes

Big Block Chevy MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 24" x 24"• Center hole size: 7"

MW Hardened 32 Spline Liberty Slip YokeUses 1350 series U joint. Primarily for use in NASCAR applications and Jerico transmissions. "D"=6-1/8". Manufactured from high strength 4340 steel forgings, through hardened, and shot peened.Sold individually.