Couplers offer direct steering connections where an angle is not required. Couplers can also be used to extend the steering shaft. Overall length is 2". OD is 1". 3/4" x 9/16-26.

Designed to seal the steering column tube through a hole in the the firewall.   The 3" O.D. aluminum flange ring mounts to the firewall with four screws and the fire resistant rubber seal has a 3/4" hole for the steering shaft...

Our Delrin bushing is custom made on CNC equipment to provide you with a precise fit for your 3/4" steering column.

This steering wheel button mount can be used to mount the line lock button 206114. Includes hardware.Specifications:• Material: Aluminum• Color: RawSold individually.

Cap your radiator with our steel radiator cap.

Our heavy duty solenoid is designed for continuous use and is able to handle the high amp loads generated with dual 16 volt battery systems common in race cars.

Quarter-Max's Pro Twist Lock Starter Cable Quick Disconnect Kit offers a unique twist lock design for quick and secure power connection. Speed up your engine removal and installation. Simply twist and unplug your starter from the firewall, no...

This thin wrench is designed to tighten the jam nuts on starter buttons and toggle switches. If you would use a standard wrench to try to tighten these jam nuts they are normally to thick to fit in the available space so we made this wrench just for this...

Starter buttonMaterial 0.1825 4130   Hole size .2650"

Start button mount Material .125" 4130

Start button Bracket base Material 14 gauge mild steel.

Make wiring your standard RJ switch panel a ease with this 1/8" copper jumper strip. The jumper strip ties all your switches together.

 The standard seat padding is made to give a more comfortable ride. Attaches to your seat easily with the provided snaps. Fits best with glass seat #211706.

Quarter-Max's ladder bar housing brackets are manufactured in-house to high quality specifications with precise hole locations and smooth profiles.This bracket is included in our ladder bar kit.Specifications:• Thickness: 1/4"• Material: Mild...

Standard duty plunger style switch.

The original ISC Racers Tape. Tears straight and is easy to apply. Not your average "hardware store" silver duct tape. Features:• Provides airtight seals• Easy to unwind• High bonding strength Specifications:• Size: 2 in. x 90 ft...

.060 stainless steel tab with 10-32 hole

This spring attaches to the header collectors 1/2" x 3" free. Length is 3" with max length of 4.440”

Designed to fit most tube chassis cars with big block Chevy 4.840" bore spacing 5/16" stainless steel flanges 2-1/4” to 2-3/8” step primary tube size option comes with 3-1/2” to 4-1/2” megaphone merge collector 2-3/8" to...

5" Bore 2.5" Tube Size 5/16" Thick

Stainless Steel EGT Weld In Bung.

GM ApplicationsPowerglideTH200 4RTH350TH700 R4T564L604L60EMuncie M20 / M21 / M22Super T-10 (1st design) Forged 4340 Chrome Moly Fully Machined Steel– Maximum strength for extreme applications– Additional material in critical areas–...

Thickness .090" Made of 4130

GM MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Clutch

This small profile, stainless steel latch can be used nearly anywhere you would want an access door that needs to be held tightly closed.Specifications:Material: Stainless steel

This window tab can also be used as a spoiler tab.Specifications:• Material: Mild steel• Thickness: .095"• Style: 2 holes

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2015 Chevrolet C7 Corvette• Material: Stainless steelThis item will have a discounted oversize...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2014 Dodge Dart• Material: Stainless steelThis item will have a discounted oversize fee of $35.00...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2019-2023 Chevrolet Camaro - Five Star• Material: Stainless SteelThis item will have a discounted...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car.Specifications:• Body: 2012 Chevrolet Camaro• Available Materials: Aluminum & stainless steelThis item will have a...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose.Specifications:• Body: Pontiac GXP• Material: Stainless...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must be stick out past the front of the nose.Specifications:• Body: 2010 Ford Mustang• Material:...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose.Specifications:• Body: 2012 Dodge Avenger• Material: Stainless...

A splitter is designed to be bolted to the bottom lip of the front end and creates down force on the front end of the car. Note: 3/8” must stick out past the front of the nose.Specifications: • Body: Chevrolet Cobalt• Material: Stainless...

This aluminum tray is designed to fit the split Holley Dominator or similar carburetors. It is cut on a water jet for a precise fit. It's 2-piece design allows the pieces to overlap in the middle to be bolted or riveted together. Made from .050" 5052...

The connection between steering column and steering box may very well be one of the most crucial. Put these rack adapters in place for a quality fit. Proper installation will provide solid performance. Features:• Fits Mustang II / Pinto non-power...

Upgrade your wing support system with our spill plate support kit. This kit may be installed to support the rear of the spill plates. Includes all hardware.

GE50ET-2RS, Spherical Plain Bearing, Metric - Sealed - PTFE Lined Race - Alloy steel, heat treated, single fracture, phosphate coated, PTFE LinedBall - Alloy steel, heat treated, phosphate coated Specifications:• B - Ball Bore Max: 50.000 mm• B...

This Speedwire System was designed to be versatile, and installed in cars with naturally-aspirated engine combinations, including Pro Stock/Top Sportsman. System Features:• 10 Switch panel enclosed in extruded aluminum housing with serial...

Complete 6 stage pro series nitrous system with an 8 relay controller. The nitrous controller can be programmed from two to six stages to accommodate your individual needs. The switch panel shown with optional LED interior light, and billet mounting...