Heavy gauge stretch cord - 18 inches stretches to about 6 feet. Can handle all trans-brake switches.Sold individually.

Fabricating a rear frame on a Pro Street or Drag Race car is easier and looks more professional with a 2" x 3" dropped crossmember. The sturdy 2" x 3" .083” steel crossmember is mandrel bent on CNC equipment to provide uniform wall thickness and...

Fabricating a rear frame on a Pro Street or Drag Race car is easier and looks more professional with a 2" x 3" dropped crossmember. The sturdy 2" x 3" .083” steel crossmember is mandrel bent on CNC equipment to provide uniform wall thickness and...

This Fiberglass Ford Dash was modeled off the Mustang dash. We use this dash for of the Ford model 2010. Two-piece dashes make accessing the bellhousing and clutch easier when the passenger side is removed during maintenance...

This item will have a discounted oversized shipping fee when shipped via ground delivery to the contiguous 48 United States.2010 Dodge Avenger 2-Piece Dash Two-piece dashes make accessing the bellhousing and clutch easier when the passenger side is...

Wilwood's two pound residual pressure valve retains a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted...

Required by most sanctioning bodies, the master disconnect switch cuts off all electrical power in the event of an accident. This is a 250 amp switch.Specifications:• Voltage: 12V/24V• Max Continuous Current: 250 Amps• Max Surge Current:...

Big Block Chevy Lightweight MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 24" x 24"• Lightweight version weighs approximately 1.35 lbs less than our standard Big Block Chevy Midplate RJ-213109.

Driveshaft Cover, 24 in., 4130Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the...

Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...

Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...

Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...

Our Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...

Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼". Measurements are overall length. Bearing sold separately below. Please call for prices and part numbers...

Our new Non-Rotational Throwout Collars are designed for use with our billet clutch fork. These collars have two CNC milled pockets that engage the fork and prevent rotation. This design is very precise and provides minimal friction. All collars are hard...

Aluminum Black Cap with RJ Logo with Aluminum Bung with o-ring seal. Most commonly used for aluminum fuel tanks.Black cap features our RJ Race Cars logo. Aluminum bung with internal threads.Specifications:• Cap Material: Aluminum• Cap Color:...

Aluminum Fuel Tank Filler Cap. Anodized aluminum black fuel cap with laser engraving. Knurled grip surface with sealing o-ring included. Steel Fuel Tank Weld Bung. Welds to steel tanks and accepts the aluminum fuel cap. Also used for a large rear filler...

The high cooling Scirocco drag radiator from C&R Racing is an all aluminum radiator with no epoxy.  Fan and shroud NOT included. • 21” x 10”• 36 mm• Screw-in fittings• Choose inlet and outlet fittings•...

2015 Floorboard Camaro Carpet (Passenger Side)   See image for dimensions    

2015 Camaro Carpet (Driver's Side)   See image for dimensions.    

This 2014 Chevrolet Camaro wickerbill is water jet cut from aluminum. It is available in a 1/4" through 3/4" tall after installation.Specifications:• Body: 2014 Chevrolet Camaro• Material: AluminumThis item will have a discounted oversize fee...

This item will have a discounted oversize fee of $50.00 when shipped via ground delivery to the contiguous 48 United States.This is a 2 piece 2013 Camaro dash. Made of light weight fiber glass.

Lug Nut Torque Extension Tool, 15/16 in. SocketTorque down the lugs on your rear drag wheels without using multiple extensions.Specifications:• Length: 20 in.• Socket Size: 15/16 in.• Finish: Plated

-3 AN Straight to 90 Degree Brake Hose. This high quality stainless steel braided fluid line has a 90 degree fitting on one end and a straight fitting on the other. Works well for brake and clutch systems, as well as for pressure gauges or nitrous. PTFE...

Driveshaft Cover, 20 in., 4130Driveshaft covers, along with driveshaft loops, are used in the construction of driveshaft tunnels. In the event of driveline failure, most sanctioning bodies require a minimum 12 in. driveshaft tunnel to help protect the...

Mount your Meziere remote water pump directly to C&R radiator using this fitting. -20 on both ends.

-20 AN to -20 AN Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Male AN connection for -20 AN hose.• O-ring seal.• O-ring included...

-20 AN to -16 AN Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Male AN connection for -16 AN hose.• O-ring seal.• O-ring included...

-20 AN to -12 AN Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Male AN connection for -12 AN hose.• O-ring seal.• O-ring included...

-20 AN to 1-3/4 In ID Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Slip diameter fits 1.75" ID rubber hose.• O-ring seal.• O-ring...

-20 AN Port to 1-3/4" OD Inlet Radiator Fitting, Aluminum.Specifications:• Size: -20 AN Port• Size: 1-3/4" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

-20 AN to 1-1/2 In ID Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Slip diameter fits 1.50" ID rubber hose.• O-ring seal.• O-ring...

-20 AN Port to 1-1/2" OD Inlet Radiator Fitting, AluminumSpecifications:• Size: -20 AN Port• Size: 1-1/2" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

-20 AN to 1-1/4 In ID Hose WN Style Fitting, BlackThe o-ring sealed end of this fitting is a modified -20 AN that provides a safe seal and extraordinary function. Features:• Slip diameter fits 1.25" ID rubber hose.• O-ring seal.• O-ring...

-20 AN Port to 1-1/4" OD Inlet Radiator Fitting, AluminumSpecifications:• Size: -20 AN Port• Size: 1-1/4" OD Inlet• Style: Radiator Fitting• Material: AluminumSold individually.

You can rest easy when you secure your car with this tie down strap. Twisted snap hook ends ensure the hook will not slip off the D-rings.   The 2" wide webbing has a recommended safe working load of 3300 pounds and is 7 feet long.

Our throwout bearing collars are made from 7075 billet aluminum and are hard anodized. Available in six different sizes ranging from 2" to 3¼”. Measurements are overall length. Bearing sold separately below. Please call for prices and part...

This handy mount kits can be used for 10 oz CO2 bottles. Kit includes 2" base cup, clamp, and a 2" bottle mount. Welding required.

Body Mount BracketSpecifications:• Size: 2 in. x 2 in.• Material: Mild steelAlso available in titanium.Sold individually.

This MSD Two Step Module Selector lets you choose from two different rpm limits that can be activated at different times. Features:• It can also be used with an MSD Timing Control• Launch rev limiter• High speed rev limiterClick here to...