TFX Lightened MotorplateSpecifications:• Material: 6061-T6 aluminum • Thickness: 1/4"• Notch to notch: 26"• Overall width: 34" Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

This body exhaust flange provides a professional, finished look while protecting the paint & body around the side exit headers or zoomies. Includes hardware.Specifications:• Style: Zoomie header• Material: 5052 aluminum• Thickness: ...

Press-in this housing faceplate stud into the 3rd member mounting flange on 8" and 9" Ford housings for mounting the 3rd member to the rear end housing. Specifications:• Thread: 3/8"-24• Overall length: 1-3/4"

Faceplate for 11 in. rear end housing. For wide 4-link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RH

Faceplate for 11 in. rear end housing. For 16 in. wide Four Link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RH

Relay the amount of force applied on your wheelie bars to your Racepak with this load cell. Fill the load cell with brake fluid and install the sensor into the 1/8" NPT port. Modification of current top wheelie bar tubes required to install, or switch to...

This valve stem requires a 21/64 drill bit and 1/8-27 NPT tap to install. When installing, go about 3/4 of the way through with the tap so the NPT threads will tighten up properly. Use thread sealer tape and tighten stem into wheel.Qty-1 required for...

Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-5/8" ID• Material: 4130• Thickness: 1/4" Also available in 1-1/2" ID.

Use qty-2 of this bracket to bolt two pieces of tubing together.Specifications:• 1-1/2" ID• Material: 4130• Thickness: 1/4" Also available in 1-5/8" ID.

Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3 ply polyester silicone• Length: 3 Ft

Use this breather hose to connect valve cover vents to the overflow tank or chassis on super charged/blown engine applications.Specifications:• 1-1/4 in. ID• Color: Black• Material: 3 ply polyester silicone• Length: 12 Ft

Weld this bushing into the chassis to mount your midplate/midmount.Specifications:• I.D.: .375"• O.D.: .625"• Width: 1.3125"• Material: 4130

Lexan Window Rubber, 1/4 in. x 3/4 in.This Lexan window rubber is designed for installing front and rear Lexan windows when using the factory mounting window lips on a steel body car. Select your desired rubber thickness to mount your Lexan windows flush...

This kit is designed for installing front and rear lexan windows when using the factory mounting window lips on a steel body car. Select your desired rubber thickness to mount your lexan windows flush with the body. Available rubber sizes: 3/8" x 3/4",...

Safecraft 10 Lb Fire System, Fluoro FS Fire Protection Fluid, Pull Cable & Steel Tubing Kit LT10JABSafecraft’s Model LT is considered the “gold standard” of the industry. More racers and professional race teams use the Model LT more...

Eaton HD clutch GM 12 blt car / 30 spline / 01-088530H / 3.90-down ApplicationChevy 12 Bolt Passenger CarUsing a gear set requiring a 3 series carrier DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect replacement for worn-out OEM clutch...

Eaton HD clutch GM 12 blt car / 30 spline / 01-088530 / 4.11-up ApplicationChevy 12 Bolt Passenger CarUsing a gear set requiring a 4 series carrier DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect replacement for worn-out OEM clutch...

Eaton HD clutch GM 8.5 / 28 spline / 01-085728 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 28 Spline Posi UnitA perfect...

Eaton HD clutch GM 8.5 / 30 spline / 01-085530 /2.73-up ApplicationChevy 8.5 10 Bolt Bolt Rear EndUsing a 2.73 or numerically higher gear set NoteRequires special side bearings & races DescriptionEaton Heavy Duty 30 Spline Posi UnitA perfect...

Drag Race Use Only For Hub Mount WheelsChoice of 4 1/2″ or 4 3/4″ bolt circle Springs Are Not IncludedAccepts 2 1/2″ OD x 14″ springs – Sold separately Dimensions22.690″ – Extended16.290″ –...

Complete Center Section Includes: N2205 / N22063.062″ Bore S-Series Case used for 28 or 31 spline3.250″ Bore S-Series Case used for 35 spline 8-10% stronger material than factory nodular ironCritical areas reinforcedHeavy duty main caps and...

Alloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Applications For 35 Spline Alloy AxlesChevy 12 bolt carDana 60Ford 8.8Ford 9″ (requires 3.250″ bore...

lloy axle packages are optimized for street & track useSee our Hy-Tuf axles for maximum torsional strength for all out Drag Racing Application Splines AvailableChevy 8.2 10 bolt…… 28 / 33 **Chevy 8.5 10 bolt…… 28 / 30 /...

ApplicationStrange B3359 / B3359TA / B3360 / B3360TA master cylindersOEM Mopar K car master cylinder and aftermarket replacements Allows use of 3 AN brake lines common to Drag Racing For 9/16″-20 to 3 AN – See P2357

Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...

Pro Race Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications & Splines AvailableChevy 8.2 10 bolt… 33Chevy 8.5 10 bolt… 33Chevy 12 bolt car… 33 / 35Dana...

2005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 1/2″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...

2005-2014 Ford Mustang 8.8 Pro Race axles, eliminator kit, 5/8″ stud kit, & L/W spool Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Package IncludesHy-Tuf Ultra Strength Axles...

Keep your differential clean and ready to go using Strange differential storage cases. They are shaped and molded to fit your differential solidly inside. The cases include straps and mounting hardware to keep the two halves sealed together.

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.150″ ID housing ends are...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Applications For 40 Spline AxlesDana 60Ford 9″ (requires 3.250″ or 3.812″ bore case) 3.350″ ID housing ends are...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

Hy-Tuf axles are optimized for Drag Race use onlySee our Alloy axle packages for street / track applications Hy-Tuf Applications & Splines AvailableChevy 8.2 10 bolt… 28 / 33Chevy 8.5 10 bolt… 28 / 30 / 33Chevy 12 bolt car… 30 /...

ApplicationFord 9″ with 31 spline axles DescriptionEaton 31 Spline Detroit TruetracA helical gear differential that offers smooth power transfer FeaturesTorque Biased Mechanical Unit• Helical gear design• Smooth, automatic...

ApplicationFord 9″ with 31 spline axles DescriptionEaton 31 Spline Detroit LockerA very strong mechanical differential FeaturesTorque Sensitive Mechanical Unit• Automatic locking differential• Clutchless & maintenance free•...

Eaton Detroit Locker Differential, Fits 9" Ford with 35 Spline Axles, Requires Aftermarket 3.250" Bore Case ApplicationFord 9″ with 35 spline axles RequirementsAftermarket 3.250″ bore caseAxles with 30 degree pressure angle DescriptionEaton...

Kit for N1922 / N2322 supports using 28 spline pinion ApplicationStrange pinion supports N1922 / N2322Using a 28 spline pinion shaft Using a 35 spline pinion shaft? – See N1924 Kit IncludesTimken® front pinion bearing – N1930Adjustable...

Tapered Bearing Pinion Support, Fits 9" Ford Center Sections Used for Drag Racing ApplicationDrag Race Use Only For Street or Street & Strip – See N1917P FeaturesForged 2024-T351 aluminum bodyClear anodized finishMachined for oversized...