1/16" x 36" Long ER5336 Aluminum Welding Rod Per LB.

This design fits 6 different engine combinations: BBC, SBC, BBF, New & Old Sytle NHRA P/S HEMI, and the DRCE/Olds. Also adjustable in height to accommodate different engine combinations. Its unique heavy duty - dual wheel casters swivel 360°...

Remove your engine with ease! This handy engine sling makes removing engines easier. Simply hang from your engine puller and bolt to the header studs. Strap lengths available in 22 in. for carbureted motors and 30 in. for blower motors...

Use this bracket to secure your engine diaper to the motor.

When welded in place, bung provides a place to mount your EGT sensor.

Cap for 1/4" EGT bungs.

Designed Specifically For Drag Racing Rear brake kit for Big Ford housing endsBrake offset = 2.332″ Note: For Big Ford housing ends with 2.500″ brake offset- See B1707WC This Strange rear brake kit includes:Forged One Piece Slotted Steel...

Our dual parachute cord mount kit consists of laser cut 4130 Chromoly brackets, Delrin bushings, bolts & lock nuts. Dual parachute systems are required to mount each parachute cord separately. Welding required.

Everything you need to pull a dual chute is in this kit.

Weld to roll cage and lock your chute cable(s) in place. Dual chute systems require a double cable clip.

This bottle mount kit includes a welded base and 2 upper bottle supports. It also comes with 2 clamps with T bolts. Some welding required.

Our Nitrous Bottle Mounts completely enclose the Nitrous Bottle to prevent it from becoming dislodged and are adjustable to fit both tall and short Nitrous Bottles. Comes completely welded and includes 2 pull pins.   May be use...

Isolate your positive and negative battery cables in one box. Includes a plastic cover for added safety. Stud size 3/8"    Sold Each

Dual Parachute Cable Tab for Lightweight CablesSpecifications:• Material: 4130• Thickness: .062 in.

Our  battery tray can be used to mount single or dual battery systems. The tray can either be bolted or welded into place. Includes batteryhold-down.Length:13-3/4" Width: 10-1/4"

Mounting your dry sump tank doesn't get any easier than using our dry sump tank mount. Simply bolt our all-aluminum angle mount to the engine plate and clamp your dry sump in place.

This is the base for your dry chemical fire bottle kit 0.063" thick 4130.

This bracket is part of the Liberty Transmission Mount Kit. You can buy the items separately and weld them yourself. The kit makes removing and installing Liberty transmissions. Holes are 1.5000" apart and are 0.4531 in size.

This bracket is part of the Liberty Transmission Mount Kit. You can buy the items separately and weld them yourself. The kit makes removing and installing Liberty transmissions.

This speed sensor is commonly used to detect Drive Shaft RPM or Wheel RPM. This metal sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following Racepak data loggers and dashes:• Sportsman•...

Driveshaft Loop Mount TabSpecifications:• Thickness: .187 in.• Material: 4130• Hole Size: .375 in.Sold individually.

This speed sensor is commonly used to detect driveshaft RPM or wheel RPM. This plastic sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following Racepak data loggers and dashes:• Pro 1B / Pro...

DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 32" overall width • 26-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

DRCE Motorplate  Specifications• Made of 6061-T6 1/4" aluminum • 34-1/2" overall width • 28-5/8" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

Add a drain plug to your project using this bung and plug.

Want to have a better reaction time? The new Quarter-Max Drag Racing Simulator gives you the feeling of being in your racecar. The simulator has a semi-gloss black powder coated frame. The adjustable seat and steering column adjusts to fit different...

Material .125" 4130

This lightened triangular bracket mounts to the wing or bumper and allows for the installation of wing struts using a rod end.Specifications:• Material: Mild Steel

Seals for use with the double row housing ends.

Bearings and retaining ring for the double row housing ends.Sold as a pair.

With the fully anodized black bracket and rim, and a oversized, red concave shaped top that measures close to the diameter of 1", this Double O Button looks great, and fits a finger perfect, with or without gloves. The bracket allows for easy mounting...

Big Block Chevy Pro Mod Double Frame Rail MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• BBC• Pro Mod Double Frame Rail

Double Flaring Tool KitFeatures:• Flare brass tubing to 45 degrees• Adapters 3/16 in through 1/2 in. - includes 5 adapters• Chrome swivel, made of alloy steel reduces friction• Forged yoke made of heat-treated steel• Plastic...

All of our Quarter-Max ladder bars feature an exclusive Rick Jones design to eliminate the binding caused by adjustment of the heims. Our bars are designed to always have the heims parallel to each other so that putting the bolts back in is no longer a...

Specifications:• Material: 5052 aluminum• Thickness: .060" Hole size .320"

Our Door Striker Mounts are the quick solution to mounting door strikers to your fiberglass body. Weld the tubes to your chassis and attach the strikers to the plates.Sold individually.

Specifications:• Material: 4130• Thickness: .050"• Hole Size: 0.45"• Size: 2.50" x 1.63"

No welding required! Prevents door from opening too far. CNC bent tabs provide for solid attachment. All hardware included.

Specifications:• Material: CR mild steel• Thickness: .11"

Quarter-Max® Door Stands provide the perfect resting spot for your doors. Our lightweight aluminum Door Stands require some assembly and fold to a mere 12" wide for storage. They feature self-locking hinges and bungy cords.This item will have a...