Chassis & Suspension
Get the best products at the lowest prices on chassis and suspension components!
- 4-Links & Components
- Anti-Roll Bars
- Back-Halfs
- Ballast, Lead & Weight Bars
- Bottle Mounts & Billet Clamps
- Brackets, Gussets & Tabs
- Drag Race Chassis Kits
- Engine Mounting
- Ladder Bars & Components
- Rear End Housings & Components
- Street Chassis & Front Clips
- Struts & Components
- Shocks, Springs & Accessories
- Wheelie Bars & Components
- Wishbones & Diagonal Links
-
LED Work Light Mount Bracket
Quarter-Max
$7.99Mount this bracket anywhere in your car to attach the Super Bright Interior Light (LED) part #214162 Raw finish.RJ-410916$7.99 -
LED Work Light Mount Bracket, Black
Quarter-Max
$9.99Mount this bracket anywhere in your car to attach the Super Bright Interior Light (LED) part #214162 Black powder coat finish.RJ-410916B$9.99 -
$8.90
-
$4.99
-
$16.99
-
$5.99
-
Lightweight Wheelie Bar Load Cell with 1/2" Hole x 3/4"-16 Thread, Aluminum, Black
Quarter-Max
$295.99Relay the amount of force applied on your wheelie bars to your Racepak with this load cell. Fill the load cell with brake fluid and install the sensor into the 1/8" NPT port. Modification of current top wheelie bar tubes required to install, or switch to...RJ-219705-2B$295.99 -
Lock Collar, 1 In. Tube Size
Quarter-Max
$14.99Use this lightweight aluminum lock collar on the top of your wheelie bar support kit. Can also be used for other items. Specifications:• Material 6061-T6 aluminum• Available sizes: 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., and 1-1/2 in.Sold...RJ-218005$14.99 -
Lock Collar, 1-1/2 In. Tube Size
Quarter-Max
$14.99Use this lightweight aluminum lock collar on the top of your wheelie bar support kit. Can also be used for other items. Specifications:• Material 6061-T6 aluminum• Available sizes: 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., and 1-1/2 in.Sold...RJ-218005-4$14.99 -
Lock Collar, 1-1/4 In. Tube Size
Quarter-Max
$14.99Use this lightweight aluminum lock collar on the top of your wheelie bar support kit. Can also be used for other items. Specifications:• Material 6061-T6 aluminum• Available sizes: 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., and 1-1/2 in.Sold...RJ-218005-2$14.99 -
Lock Collar, 1-1/8 In. Tube Size
Quarter-Max
$14.99Use this lightweight aluminum lock collar on the top of your wheelie bar support kit. Can also be used for other items. Specifications:• Material 6061-T6 aluminum• Available sizes: 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., and 1-1/2 in.Sold...RJ-218005-1$14.99 -
Lock Collar, 1-3/8 In. Tube Size
Quarter-Max
$14.99Use this lightweight aluminum lock collar on the top of your wheelie bar support kit. Can also be used for other items. Specifications:• Material 6061-T6 aluminum• Available sizes: 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., and 1-1/2 in.Sold...RJ-218005-3$14.99 -
Long Weight Bar Tab
Quarter-Max
$11.99This weld-on tab offers you a quick and easy way to mount your weight bars. It features a nut which has been welded into place to allow for easier bolting of weight bars. Edge of tab to center of hole is 1-5/16".RJ-219108$11.99 -
Low Profile Slim-Line Wheelie Bar Wheel Housing Kit, 4130
Quarter-Max
$68.99This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a dedicated fixture. Specifications:• Bracket material: 4130•...RJ-201204-6$68.99 -
Low Profile Slim-Line Wheelie Bar Wheel Housing Kit, Titanium
Quarter-Max
$194.99This kit allows you to build your own wheel housing without requiring the use of a jig in order to weld the housing together. This saves time and money by eliminating the need for a dedicated fixture. Specifications:• Bracket material:...RJ-201204-4$194.99 -
Lower Control Arm Kit, Ultra & Altered Ultra Struts - 1/2" ID Rod Ends
Strange Engineering
$390.00ApplicationUltra StrutsAltered Ultra Struts DescriptionLower Control Arm KitFor frame tabs using 1/2″ boltsProvides parts necessary to fabricate lower control arms Kit Includes4130 Chrome Moly Rear Arm• TIG welded• Bearing end...STR-S3419$390.00 -
Lower Control Arm Mount Kit
Quarter-Max
$156.99These are the same control arm mounts used at RJ Race Cars. The .125" thick brackets are made of 4130. .095" thick gussets for added strength. NAS bolts, jet nuts, AN washers and misalignment bushings are included. Welding required.RJ-202111$156.99 -
Lower Control Arm Mount Kit, Welded
Quarter-Max
$307.99These are the same control arm mounts used at RJ Race Cars. The .125" thick brackets are made of 4130. .095" thick gussets for added strength. NAS bolts, jet nuts, AN washers and misalignment bushings are included.RJ-202112$307.99 -
Lower Control Arms Plated
Quarter-Max
$603.99Use this kit to mount the bottom of your Strange Struts to the framerails. All 4130 tubing, tube adapters, and rodends. Ball joint bearings included. This kit also works with Penske Struts #75DBDRAG-STRUT. Nickel PlatedRJ-980250$603.99 -
Lower Control Arms, Titanium
Quarter-Max
$1,249.99These titanium lower control arms are made to fit Strange Ultra Struts only. Does not include bearings, snap rings, or rod ends. Sold in pairs.STR-S3419TIT$1,249.99 -
$4.99
-
LS Motorplate
Quarter-Max
$221.99This motorplate is designed to fit LS-1 through LS-9 engines. It is machined on the driver back side for clearance for aftermarket cylinder heads. Specifications • Made of 6061-T6 1/4" aluminum • 35-1/2" Overall Width • 29" Notch...RJ-213240$221.99 -
MagnaFuel ProStar EFI 625 Fuel Pump Mount
Quarter-Max
$5.99Specifications:• Material: Steel• Hole Spacing: 1.500"• Application: MagnaFuel ProStar EFI 625RJ-410552$5.99 -
MagnaFuel Regulator Mount
Quarter-Max
$40.99This fuel regulator mount is designed to mount most MagnaFuel regulators. Mounts the fuel regulator on (2) rubber vibration mounts to reduce vibration to the fuel regulator and aeration in the fuel system. Bracket has mounting slots to fit most intake...RJ-213121$40.99 -
Mark Williams Aluminum Black Cap & Steel Bung
Mark Williams
$52.99Aluminum Fuel Tank Filler Cap. Anodized aluminum black fuel cap with laser engraving. Knurled grip surface with sealing o-ring included. Steel Fuel Tank Weld Bung. Welds to steel tanks and accepts the aluminum fuel cap. Also used for a large rear filler...RJ-219302$52.99 -
Master Cylinder Mount
Quarter-Max
$14.99Can be used to mount your master cylinder to the firewall or driver's floor. Material .125" 4130 Hole sizes 0.350"RJ-410029$14.99 -
Master Disconnect Switch Bracket
Quarter-Max
$15.99Specifications:• Material: SteelFor use with the RJ-214118 250-Amp Disconnect Switch.RJ-410130$15.99 -
Master Disconnect Switch Bracket for Fire System Power Shut Off Kit
Quarter-Max
$13.99Use this bracket to mount the Flaming River 250-amp Big Switch Battery Disconnect #FLR-FR1003-1. Features integrated mounting hole for proper alignment of the Quarter-Max Fire System Power Shut Off Kit #RJ-214214.Specifications:• Material: SteelRJ-410130-1$13.99 -
$15.99
-
$14.99
-
Midplate Installation Kit
Quarter-Max
$52.99This easy to install kit gives you the perfect mounting points for your midplate and eases motor placement.RJ-213106$52.99 -
Mopar Hemi Pro Stock Motorplate
Quarter-Max
$193.99Mopar Hemi Pro Stock Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 33" overall width • 27-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213113$193.99 -
Mopar Housing Ends
Strange Engineering
$140.00DescriptionStrange Housing EndsSold as pair Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by Strange• Material forged in the USA...STR-H1133$140.00 -
$10.99
-
$14.99
-
$13.99
-
$9.99
-
Motorplate Installation Kit
Quarter-Max
$52.99This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes laser cut 4130 brackets and all hardware for installation. Welding required.RJ-213105$52.99 -
Motorplate Mount
Quarter-Max
$14.99This 4130 mount welds to your chassis for easy placement and bolting of your motorplate.RJ-410104$14.99 -
Muffler Vent
Quarter-Max
$7.49Bronze/Steel Breather Filter Vent 1/8" NPT Male, 7/16" Length, 7/16" Hex Size.RJ-219101-1$7.49